Top 3 Oil Hose Reviews

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Check Stock

6.0 Liter Brake Pump Pneumatic Fluid Oil Extractor Stainless Steel Oil Change Vacuum Fluid Extractor Pump for Any Vehicle Fluid Change Tool No Leaks Oil Extractor Pump

Work Freely and Widely -- Extract the engine oil, Brake fluid, ATF fluid and other non-corrosive and non-thick fluid of motorcycles and vehicles. Not....
Easy to Operate: The pneumatic way for higher speed of oil change.
just need to connect with air compressor. Easy to do the oil / fluid changing for....
Vehicle Fluid Removal Tool: At 6 liters of capacity, this fluid-extractor pump can be used for oil and fluid changes on most light and heavy duty....
Brake Bleeding Hose-- Makes your oil extractor multi-functional. One new brake oil silicon hose 4x8mm X 2 Meter (78.7 inch) with check valve to avoid....
Included components: Fluid Extractor 60" (1.5M) PVC Steel Braided Suction Hose 3/8" (9.5mm) x 17" (430mm) Dipstick Tube, 3/8" (9.5mm) x 30" (750mm)....

Check Stock

ELEAD 500cc Oil Extractor Pump, Oil Transfer Pump, Fluid Extractor, Fluid Syringe Extractor, Car Vacuum Fuel Transfer, Siphon Pump for Gasoline Hand Cleaner for auto Mechanics

...lawn mowers, golf carts and other vehicles..
[The Accessories of Oil Extractor ] Gear Oil Pump includes:1 clear liquid syringe with locking adapter, 2 extension tubes (length 8" diameter 1/4" and length 8" diameter 3/8" and locking cap at the end of the hose). gear oil pump extending transmission fluid pump'service life..
[The Materials of Liquid Transfer Pump ] Oil Pump Extractor uses new quality eco-friendly materials for strength, sealing and durability. It is also removable for easy cleaning and maintenance..
[Easy to Use Oil Transfer Pump ] Insert the hose into the adapter,can be locked,press the black button to easily remover the hose. extended syringe hose helps draw or inject liquid easily..
[The Packaging of Oil Pump ] Oil Change Pump with exquisite color box , bring you high-end beautiful visual experience, can also be as a gift..

Check Stock

Boenoea Bike Water Bottle Cage Aluminum Alloy Lightweight Bicycle Water Bottle Holder for Road Bike MTB Cycling

1. Hydraulic Hose Cutter: Aluminum Alloy Body, Lightweight Design, Compatible with Various Oil Needle Specifications, BH59/BH63 BH90 Can Cut Oil Pipes, Cutting Neatly, Conveniently and Quickly..
2. Bike Hydraulic Disc Brake: Compatible with Ordinary Oil Needles and Five-wire Bodies, and the Side Cutter Design Can Cut Oil Pipes..
3. Hose Cutter Tool: Efficient and Precise Operation, Avoiding the Twisting and Deformation of the Oil Pipe Caused by Violence, the Aluminum Alloy Cross Arm Knob Is Detachable, Aluminum Alloy CNC Processing,.
4. Hose Cutter: the Cutting Is Convenient and Fast, and the Cutting Is Neat. (Blade Can Be Replaced by Design).
5. Needle-assisted Positioning, Static Placement, Compatible with Ordinary Oil Needles. Round Head Auxiliary Positioning, Static Insertion, Suitable for Five-wire Body Insertion, Easy to Switch Between Double Plugs..

Check Stock

EVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..

Check Stock

Oil Filter Drain Tool Oil Filter Draining Tool Replacement for 15620-36020 15620-36010 Scion 2.0L to 5.7L Engines with Cartridge Style Oil Filter System

Fitment: Fit for T-oyota, L-exus, Scion 2.0L - 5.7L Engines with cartridge style oil filter system.Fits T-oyota Filter Housing Part # 15620-36020 & 15620-36010..
High-quality: Made of high quality solid brass, and nitrile O-Ring seals for long lasting durability..
The 3 pieces all metal body connects to a 30 inch long silicone drain hose that allows you to direct the oil into your oil disposal container..
It makes the oil change process much cleaner by using this oil drain hose. Once the housing is drained, it can be removed to replace the filter without the usual mess..
Package Included: 1x Engine Oil Drain Hose(No installation instructions).

Check Stock

TAISHER 10PCS Brass Hose Barb Fittings 3/8 Inch to 1/4 Inch Barb Hose, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel with 20PCS Hose Clamp

[ MATERIAL ] High quality solid brass, firm and durable, brass is corrosion resistant. This pipe fitting can apply to water, air, gas, oil and fuel..
[ HOSE CLAMP ] Worm Gear Hose Clamp with 8mm width adjustable stainless steel band. The extended band liner to protect the hose from damage caused by extrusion. Connection fasteners for water, oil, gas, hydraulic hose..
[ OPERATING TEMPERATURES ] Temperature range from -65 to +250 degrees F..
[Function] Used to connect hoses of different diameters. The hose barb can be firmly connected to the hose, and the hose clamp can form a tight seal on the flexible or semi-rigid hose..

Check Stock

uxcell 2pcs Lubricating Oil Hose 3mm(1/8-inch) ID x 5mm(3/16-inch) OD 3.3ft Water Tube Black Rubber Tubing

【APPLICATION】- Lubricating Line Hose mainly used to transport lubricating oil.
【Advantage】- Lubricating Hose has Oil resistant, wear-resistant, aging resistant, soft, lightweight, good bending performance, smooth appearance.
【FEATURE】- Lubricating Tube Measures 0.12-inches inside diameter by 0.2-inches outside diameter by 3.28-feet total length. 0.04" thin tube wall providing higher flow rates and working pressure.
【Rubber material】- Lubricating Pipe made in Rubber, which has the characteristics of high-temperature resistance, oil resistance..
【Please Note】- The hose can not transport fuel oil on equipment.

Check Stock

Crankcase Ventilation Valve Oil Separator Hose Compatible with BMW E46 E60 E39 X3 X5 320i, 323i, 325, 325i 328i, 330i, 525i, 528i CCV PCV Valve Ventilation Separator 5 Piece Value Kit 11611432559

【PCV CCV Exhaust Hose For BMW Replacement】Since the whole point of positive crankcase ventilation is to keep these gases out of the crankcase, the PCV valve is designed to close off when this happens and block the back flow of gases. If the PCV valve hose is broken, the gas will not be transferred back into the engine, which will reduce your engine efficiency, increase harmful gas emissions and the probability of engine failure..
【Fit The Following Vehicles】This E46 PCV Valve hose kit is a direct replacement for the original vent hoses and PCV valves on a variety of vehicles. This includes most 3 series and 5 series models from 1997-2005. SEE THE FULL LIST ON THE PRODUCT DESCRIPTION PAGE BELOW..
【Replace Part Numbers】This X3 X5 CCV hose kit can replace 11617504536 / 11617501566 / 11611432559 / 11157532649 which are commonly found on popular BMW model including BMW E46 3 series E39 E60 X3 X5..
【OEM Quality & Direct Fit】Manufactured with high temperature plastic materials & advanced technology, meets OEM standard. Even though this is not a genuine BMW PCV crankcase ventilation oil separator hose, but it works even better and lasts longer. Save your time and fund by replacing the PCV crankcase ventilation oil separator hose yourself..

Check Stock

YaeTek Oil Change Pump Extractor, 12v 60w Marine Oil Change Pump Electric Oil Pump, Diesel/Engine Oil Scavenge Pump for Oil Changes in Car, Boat, Truck, Motorcycle

...nner surface of rotor and stator. The working volume of pump is first to absorb oil from small to large, and then to discharge oil from large to small after absorbing oil. Within one rotation of blade, oil absorption and discharge are completed twice. This cycle continues..
【Package Include】The pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the direction of import and export, positive and negative poles and lock hose lock before use. The suction power of the micro suction pump is limited. Please do not connect other extension tubes..
【Do not pump】Except for engine oil and diesel,do not pump hot oil or when the car engine is running.Car engine must cool complately.Do not pump gas,paraffim,petrol or other inflammable liquids.Do not pump water and it is not suitable for storage or transportation of fuel or other liquids.Do not pump different oils into the same tank. Only pump warm motor-oil(40℃-50℃) do not pump off motor-oil, as long as the motor is running..

Check Stock

EVIL ENERGY 6AN 90 Degree Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

...rong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
6AN 90 degree swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our swivel fitting is work with nylon braided fuel hose . They are not compatible with PTFE hose, E85, rubber hose ..
These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..

Check Stock

EVIL ENERGY 6AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black 2PCS

The female AN6 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Working Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed. Package: 2 PCS..
6AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line, clutch hose, turbo line etc. Our swivel fitting is work with nylon braided fuel hose. They are not compatible with PTFE hose, E85, rubber hose..
These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle if you do not want them to stay in the original place..
Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't require special equipment. We normally recommend a bit of assembly lube to help prevent any galling..
EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..

Check Stock

VEVOR Hydraulic Hose 3/8 inch x 100 ft, Coiled Hydraulic Hose 4800 PSI, Rubber Hydraulic Hose with 2 High-Tensile Steel Wire Braid, Bulk Hydraulic Hose -20°C to 140°C, Hydraulic Oil Flexible Hose

【DURABLE MATERIAL】- The innermost tube and the outer protective cover are constructed of synthetic rubber. The outermost is cover by fabric. The inner material is two high-tensile steel wire braid reinforcement layers..
【100 FT HYDRAULIC HOSE】- The coiled hydraulic hose is 100 ft long in total, the inner diameter is 3/8 inch, and the outer diameter 3/4 inch. With a 4800 PSI working pressure, the hydraulic line is explosion-proof..
【HIGH STRENGTH】- The bulk hydraulic oil hose is constructed of synthetic rubber to resist oil and chemicals, while the outer cover also protects the hose from weather, ozone, abrasion, and corrosion..
【INCREDIBLE FLEXIBILITY】- Wire hose layers provide flexibility and versatility to allow you to install your rubber hose and hydraulic fittings in tight quarters for less vulnerability. It can work between -40 °C and 121 °C..
【VARIOUS USES】- The hose is suitable to carry petroleum, mineral oils, emulsion, hydrocarbons, and water-based hydraulic fluids. It is ideal for construction, agriculture, and other machinery that uses a hydraulic system..

Check Stock