Top 3 Inch V Band Clamp Reviews

EVIL ENERGY 3.0 Inch V Band Clamp for Flange Kit Stainless Steel

  • [Size] Fit for EVIL ENERGY 3.0inch Flange..
  • [Advantage] V-band clamp is easy to install and remove perfect for applications requiring frequent removals and provide a great seal with even pressure at the flange..
  • [Application] Widely used in exhaust system, turbocharger, downpipe, muffler etc..
Check Stock

Ideal Tridon 5620051 Stainless Steel Quick Release Clamp with Steel Screw, 3/4\ to 1-3/4\ Diameter, 9/16\ W (Pack of 10)

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS 304 Stainless Steel Flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your stainless steel tubing to the flange and allow unrestricted air flow..
  • HPS Stainless Steel V-Band Clamp Kit with Stainless Steel Flanges includes 304 Stainless Steel Quick Release V-Band Clamp, Male/Female Stainless Steel V-Band Flange Set, Non-locking Nut and Self-locking Nut.
Check Stock

BLACKHORSE-RACING 4 Inch V Band Clamp with Stainless Steel Flange 4 Inch V Band Bolt Clamp with 2 Male Female Flanges for Turbo Pipe Performance Exhaust Sysformance Exhaust Pipes

  • √ 4 INCH STAINLESS STEEL EXHAUST CLAMP KIT - Complete V-band kit is ideal for performance exhaust systems, downpipes, catback exhausts, turbo back....
  • √ COMPLETE 4 PIECE KIT - This complete 4inch Vband kit includes 1x 4" V-Band clamp which is designed to accommodate the 2x stainless steel 4" Vband....
  • √ DESIGNED FOR 4" EXHAUST PIPES - This kit is specifically designed for 4" exhaust pipes. The flanges feature a recessed opening which allows for a....
  • √ PERFECT FOR TURBO AND HIGH HORSEPOWER VEHICLES - If you're making a downpipe, catback exhaust, turbo back exhaust, mid pipe, or up pipe for your....
  • √ EASY ON, EASY OFF - A V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut. Conventionally exhaust....
Check Stock

DASBET 9pcs Wire Long Reach Hose Clamp Pliers Set Fuel Oil Water Hose Auto Tools

  • Universal Hose Pliers Set: Includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Comfortable Grip: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • Durable: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • Package includes: 1 X Hose Clamp Plier, 1 X Swivel Jaw Spring Wire Clip Plier, 1 X Swivel Jaw Band Cliper Plier, 1 X Angled Flat Band Hose Clamp Plier, 1 X Hose Remover Plier, 1 X Click-R Collar Plier, 1 X Flat Band Hose Clamp Plier, 1 X Screwdriver, 1 X Hose Remover..
  • Portable: The hose clamp tool is housed in a hand-held blow molded plastic case with handle for easy car....
Check Stock

ABN Hose Clamp Plier 9-Piece Set – Universal Automotive Fuel Hose, Oil Hose, Water Hose Removal Pliers Remover Tool Kit

  • [Cohesive Plier Clamp Set]: ABN Hose Clamp Plier 9-Piece Set is a one stop shop for taking apart an engine or replacing fuel, oil, and water hoses.
  • Tools in the plyer kit squeeze together taking pressure off hose.
  • Tools can hold the locking tab of connector in an open position leaving your hands free to work elsewhere.
  • [Built to Last]: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • [Comfortable Grip]: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • [Portable Storage]: Heavy-duty 18.6 x 3.5 x 10.9 inch (47.2 x 8.9 x 27.7cm) plastic blow-molded case with handle for easy transportation, safe storage, and quick organization.
  • [Package Contents]: Includes a single hose clamp pliers, swivel jaw band clip pliers, swivel jaw spring wire clip pliers, flat band hose clamp pliers, angled flat band hose clamp pliers, hose removal pliers, circle-R (clic-R) collar....
Check Stock

ATPEAM 9pcs Hose Clamp Pliers, Long Reach Wire Spring Hose Clamp Pliers Remover for Automotive Coolant Radiator Heater and Water Hose with Band Flat or Large Clamps

  • Comprehesive Plier Clamp Set: Includes long-reach cabled hose clamp pliers, Clic-R type collar pliers, swivel jaw band clip and spring wire clip pliers, regular and angled flat band hose clamp pliers, hose removal pliers, a dual-headed screwdriver, and a hose hook for fuel, oil, and water hose repair, removal, and replacement in car, truck, and motorcycle engines..
  • Durable: Corrosion-resistant nickel chromium steel.
  • Long-reach hose clamp pliers with 24-inch (61cm) flexible wire cable shaft allows access to awkward angles.
  • Approximate 1.2 to 1.75-inch (3 to 4.4cm) jaw openings swivel to access hose clamps in any position (approximate 8-inch / 20.3cm overall length).
  • Comfortable Grip: Molded, rubberized handles for less user fatigue and more productivity.
  • Pliers feature a ratchet locking mechanism that holds clamp in an open position which saves your fingers from accidents and injuries.
  • Package includes: 1 X Hose Clamp Plier, 1 X Swivel Jaw Spring Wire Clip Plier, 1 X Swivel Jaw Band Cliper Plier, 1 X Angled Flat Band Hose Clamp Plier, 1 X Hose Remover Plier, 1 X Click-R Collar Plier, 1 X Flat Band Hose Clamp Plier, 1 X Screwdriver, 1 X Hose Remover..
  • Blow Mold Case: The hose clamp pliers is packed in a heavy-duty, blow-molded case with precision-size....
Check Stock

CV Joint Boot Clamp Pliers , Ear Boot Tie Pliers, Car Band Tool Kit, Automotive Hose Axle Plier CV Clamp Tool CV Joint Banding Tools for Most Cars with 3 Pair Clamps

  • ◇ CV Boot Clamp Pliers : Use with any banding up to 2/5-inch (10mm) in width.
  • Suitable for ear-type hose clips found on a fuel hose, cooling system, and vacuum hoses.
  • Plier works on steering gear gaiters and fuel hoses on various brands of cars.
  • Can be used for working on Oetiker System hose clamps.
  • ◇ High-quality : The CV Joint Banding Tool is made of quality stainless steel throughout, which is durable, corrosion resistant, oil resistant, high temperature resistant, and long lasting. The plier head is hardened and treated for higher hardness.
  • ◇ How to Use : Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip to tool nose and through winding mandrel slot, place 1/2-inch ratchet wrench on winding mandrel and turn until tension is applied, rotate tool over boot bending band back onto clip to apply tension and cut.
  • To complete clamping, fold down remaining band tail band into clip and secure by tapping down clip ears clip.
  • We recommend double-wrapped band for added strength.
  • ◇ CV Joint Boot Clamp Plier : Includes 3 X small clamps and 3 X large clamps. Made of stainless steel, they are very tough and can lock items very firmly. The locking teeth stop the tie at the....
Check Stock

Banjo TC206 2\ T-Bolt Hose Clamp

  • Features a Quick Release T-Bolt to allow quick and easy installation without having to fully disassemble the clamp..
  • The clamp is made of 100% 304 stainless steel for excellent weather and corrosion resistance..
  • HPS Aluminum V-Band flanges are made of 6061 aluminum and utilize a NBR o-ring to create an air-tight seal for positive pressure applications. Ideal for intercooler piping systems as well as intake systems..
  • The HPS Aluminum V-Band flanges feature a male and female side to automatically align the flanges onto each other to eliminate improper installation..
  • The back side of HPS V-Band flanges feature a recessed lip to help center your aluminum tubing to the flange and allow unrestricted air flow. REMARK: Do not use HPS Aluminum V-Band kits for exhaust applications..
Check Stock

ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose, Cooling System, Vacuum Hoses Clamping

  • [Effortlessly Install CV Boot Clamps]: Use the ABN CV Joint Ear Clamp Banding Tool – 10mm Fuel Hose Vacuum Hoses Clamping Tool to tighten and secure a CV boot banding strap quickly and easily.
  • [Fits Your Needs]: Use with banding straps up to 10 mm (2/5in) wide.
  • Suitable for ear-type hose clips found on a fuel, cooling, and vacuum hoses and on steering gear gaiters.
  • Compatible with VAG, Opel, BMW, Mercedes Benz, Honda, Mazda, and more.
  • [Easy To Use]: Wrap free-end clamps 3/8-inch or 1/4-inch roll band and clip around boot, thread band through clip tool nose and through winding mandrel slot.
  • Place 1/2-inch ratchet wrench on winding mandrel.
  • Bend band back over boot and onto clip to apply tension and cut.
  • Fold remaining band tail into clip and secure by tapping down clip ears.
  • [Comfortable Grip]: CV boot clamp tool features a 4.25-inch (10.8 cm) long plastic handle and a 1-inch (2.5 cm) long rubber grips on side levers for ultimate control, less user fatigue, and more productivity.
  • [Built To Last]: Constructed from zinc-plated alloy steel.
  • Standard band clamp crimper banding tool works with the installer’s ratchet and 1/2-inch socket (or included lever) to tighten and hold a band secu....
Check Stock

PTNHZ Universal Stainless Steel 3.0 V Band Clamp For Turbo Downpipes Exhaust Systems 2.0 /2.5 /2.75 /3.0 /3.25 /3.5 /4.0

  • FIT FOR: Complete V-band kit is ideal for turbos, waste gates, blow-off valves, exhausts and more..
  • FUNCTION: One of the advantages of using a V-Band clamp is that these retainers are perfect for applications requiring frequent removal..
  • ADVANTAGES:easy on/off--V-band kit allows you to connect or disconnect sections of your exhaust by removing a single nut..
  • MATERIAL: One 304 Stainless Steel V-band clamp..
  • SUPPORT: At PTNHZ, if you have any question about our product, please contact us right away, we can handle any problems..
Check Stock

Engine Elbow Adapter,90?? Elbow Adapter Exhaust Connection V?Band Clamp Stainless Steel 2.5in ID to 3.2in OD

  • Brilliant Compatibility:Engine Elbow Pipe For 2.5in/6.35cm ID 3.2in/8.13cm OD V-Band Flange.Manufactured according to the original specifications, which are very compatible with your model..
  • Good Replacement:90?? Flange Elbow Adapter Extremely good replacement on the market, can directly replace your old, broken flange elbow adapter.2.5in ID 3.2in OD V?band flanges on both sides, 90 degrees, with 2.5in pipeline..
  • Excellent Performance:Flange Elbow Adapter Connecting clamp have a good sealing function, if necessary, you can use welding process..
  • Easy to Install:90?? Elbow Adapter Easy to install, replace the old one directly, fix new one with a clamp, and weld if necessary.Practical and convenient in use.Such a practical tool you will need it..
  • Stainless Steel Material:Elbow Adapter Flange Clamp Precisely manufactured of high quality stainless steel material, durable, and long use life.Good quality not only can provide a safer guarantee for your life,but also good materials can increase product life..
Check Stock

JDMSPEED New 3 V-Band Flange Clamp Kit With Ridge 4 Pcs Stainless Steel Replacement For Exhaust Downpipe 4

  • Packing Includes: 4X V-Band Clamp, 8X V-Band Flanges (Male/Female), As the picture shown.
  • Both of the flange has a machined ridge for the exhaust pipe to fit into for perfect and precise welding.
  • This V-band clamp makes it easy to install and remove intercooler systems and turbo parts, such as charge piping, intake pipes, etc. Great for racers....
  • No instruction included,Professional installation is highly recommended.
Check Stock

STEELSOFT Stainless Steel Band Clamp System Kit, DIY, Large Hose Clamp Worm Clamps Duct Clamp 2.5''-115'' Diameter, 30 FT Strap + 8 Fasteners, Air Ducting, Metal Strapping, Exhaust Wrap Clamps

  • Super Easy To Use: Please read the installation manual in the 2nd image! Only a snip or plier + a screwdriver needed. If there's no a snip, please use a plier to bend the strap up and down repeatedly, it will be cut easily also!.
  • Make Your Own Clamp: Nothing like the freedom to determine your own band clamp sizes and still have enough material left for other future projects. Please read our installation manual in the 2nd image, very easy to trim strap, insert fasteners and get a custom hose clamp!.
  • Cost Effective: DIY hose clamps will make it much more cost effective and flexible than ordering a variety of expensive hose clamps..
  • 304 Stainless Steel: 1/2'' x 30 feet band + 8 PCS adjustable fasteners are well made of 304 stainless steel, rust protection, weather resistant. They will not be rusty with age, last forever!.
  • Large Hose Clamp: Sometimes it is hard to look for a large stainless steel band clamp in your local stores. Now 30 feet band strap is available to create a clamp in flexible diameter options 12 inch 14 inch 16 inch 18 inch 20 inch 22 inch 24 inch 26 inch 28 inch 30 inch 40 inch ... and 115 inch max..
  • Separated fasteners can be purchased in this link if you have extra strap left..
Check Stock