Top 3 Digital Torque Wrench Reviews

NEIKO 20742A 3/8” Digital Torque Adapter, 14.7-99.6 Ft-Lb, 3/8” Drive Digital Torque Wrench Converter/Torque Wrench Adapter, Alert Signals Torque Setting, Calibrate Digital & Analog Torque Wrench

  • TORQUE WRENCH CONVERSION: This digital torque adapter converts any ratchet wrench into a precision torque wrench with a digital gauge and serves as an accurate calibration device for existing digital and analog torque wrenches..
  • METRIC/SAE & BI-DIRECTIONAL: This digital adapter can calculate torque at both metric and SAE units (Ft.-Lb., N-m and kg-m) and bolsters a 3/8-inch drive with socket drive and can measure in both directions, clockwise and counter-clockwise..
  • PEAK AND TRACE MODE: This torque adapter unit provides two types of modes: a peak mode that indicates when a specific level of torque is reached and a trace mode that actively shows how much torque is being applied on the display..
  • NOISE ALERT AT TORQUE SETTING: The audible confirmation is accompanied by a 3 LED light indicator system to give you a progressive audio notification when reaching specified torque ratings/settings and auto shuts off after 80 seconds of idle time..
  • ADAPTER SPECIFICATIONS: Torque range: 14.7-99.6 Ft-Lb or 27-135 N-m.
Check Stock

MULWARK 3/8\ Digital Torque Wrench Electronic Set, with Buzzer & LED, 2.2-44.3 ft-lbs(3-60 Nm), High Precision Adjustable Bike Torque Wrenches Car Repairing Tool Calibrated with Storage Case

  • Torque Range&Accuracy: Digital torque wrench set range from 2.2-44.3 ft-lbs(0.1 increments), 26.6-531.6 in-lbs(0.1 increments), 3-60n/m (0.01 increments), 30.6-612.5 kg/cm (0.01 increments),0.3-6.1 kg/m(0.1 increments), accurate in clockwise direction ±2% and ±2% in a counter-clockwise direction..
  • 5 Adjustable Units, P/T Mode and 10 preset Torque: Press Button "M" & "P/T" together in torque wrench inch pounds to switch 4 different measurements(cN-m,in-lb,ft-lb,kg-cm),kg/m. Intuitive digital controls let you effortlessly fine tune torque settings. 10 memory torque presets provide quick access to most used settings. Dual torque reading modes, peak mode and track mode, support a wide variety of applications. 100 readable values ​are automatically recorded..
  • Buzzer & LED Indicator: This adjustable torque wrench set has a flashing light and an audible beeping noise when it reaches 80% of its preset value. A steady light will remind you when the preset value is reached or exceeded. Perfect for noisy environments..
  • Suitable for Various Fine Repairs: Fits any 3/8" drive sockets. Digital torque wrench with ultra-precise torque settings are used for a variety of different tasks across many industries – including home,bike,motor,car repairs and maintenance, ....
Check Stock

TAGVIT Digital Torque Wrench(7.38-147.5 ft-lbs./10-200 Nm), 1/2-Inch Drive Digital Torque Wrench Electronic Torque Wrench with Buzzer and LED Flash Notification for Bike Motorcycle Car Maintenance

  • High Precision: The torque range of the digital torque wrench is 7.38-147.5 ft-lbs./10-200Nm, with four different torque units: Nm, Ft-lb, in.lb, Kgf.cm, which can be quickly switched according to needs. Accuracy is ±2% clockwise and ±3% counterclockwise, in accordance with ISO 6789 and ASME B107.14M, with an official calibration certificate. Use a professionally manufactured 72-tooth ratchet head for greater precision in use and no slippage..
  • TRACK/PEAK Mode: The 1/2 inch drive digital torque wrench has two measurement modes, the TRACK mode can display the real-time torque value, and the PEAK mode can display the maximum torque value during use. The motorcycle torque wrench adopts a large LCD display, which is clear and easy to read. The highly backlit screen makes it easy to use even in dimly lit environments..
  • 10 Preset Modes: By adjusting the M0-M9 mode of the bicycle digital torque wrench , multiple sets of commonly used torque values and upper and lower limit alarm ranges of torque values can be preset (M0 Mode: preset torque value.
  • M1-M9 Mode: preset torque value Upper and lower limits). Ideal for beginners and professionals, it is widely used in bicycles, motorcycles, auto repair and industrial use, etc..
  • Quick Release Button: The quick releas....
Check Stock

Leolee 1/2-Inch Drive Digital Torque Wrench with Angle, 7.38-147.5 Ft-Lb/10-200 Nm Electronic Torque Wrench with Preset Value, Data Storage, Buzzer, LED Flash Notification for Motorcycle, Car

  • 【Angle Torque Wrench】The 1/2-inch drive digital torque wrench with angle within 7.38-147.5 Ft-Lb/10-200 Nm with an accuracy tolerance of ±2% clockwise, ±3% counterclockwise measures torque angle with 3 separate modes: Peak Torque Mode, Angle Mode and Peak+Angle Torque Mode for additional versatility..
  • 【Torque Value Preset and Data Storage】 The digital torque wrench has a preset mode and 500 sets of data storage functions, you can preset and save 6 groups torque and angle value. From M1 to M6, all can set torque value, angle value, torque+angle value with Track or Peak Mode. By preset value and data storage, allow you to quickly access frequently repeated applications..
  • 【Target Torque Multi-alert】The electronic torque wrench gives a warning as you approach the target torque, the buzzer will make a regular beep sound, and the LED indicate light will change from a flashing green light to a solid red light to let you know it’s time to stop applying force..
  • 【Measurement Modes】The LED display angle torque wrench provides 4 real-time torque measurements within N-m, in-lb,ft-lb. kg-cm. Switch between peak hold m....
Check Stock

ACDelco ARM601-34 3/8” & ½” Heavy Duty Digital Torque Wrench Combo Kit with Buzzer and LED Flash Notification – ISO 6789 Standards with Certificate of Calibration

  • VALUE KIT – Our value packed Digital Torque Wrench Combo Kit comes with 2 digital torque wrenches: ARM601-3 (3/8” / 3.7 to 37 ft-lbs.) and ARM601-4 (1/2” / 14.8 to 147.5 ft-lbs.), a manual of instructions and guidance, and 2 individual hard-shell cases that protect and secure the tools once they are done using. Both tools are powered by 4 AAA batteries (not included)..
  • EASY TO USE – Our lightweight, heavy duty, and professionally calibrated digital torque wrenches are engineered with high-quality materials that display real-time torque values in ft-lbs. and Nm. Excellent tool for tiny, tight, and narrow working environment, but also reliable torque values that is ideal for professionals, automotive, motor bikes, and many other industrial uses..
  • SUPERIOR QUALITY – ACDelco is long known for its stellar quality and this combo tool kit is no different. It offers speed, accuracy, and an easy-to-read LCD screen that beeps when a desired torque value is achieved. Our digital torque wrench is also highly efficient, with longer lifespan and industrial grade alloy metal engineered to last for years or even decades to come with proper uses..
  • USER-FRIENDLY – Lightweight composite housing with ergonomic soft grip handle design provides comfort for long w....
Check Stock

TAGVIT 1/2 Inch Drive Digital Torque Wrench, 7.38-147.5 ft-lbs./10-200Nm Angle Digital Torque Wrench, Electronic Torque Wrench with Buzzer and LED Flash Notification, ±2% Accuracy

  • Four Torque Measurement Units: This digital torque wrench can measure from 7.38-147.5 ft-lbs./10-200Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
  • Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
  • Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your dif....
Check Stock

Leolee Adjustable Digital Torque Wrench (2.2- 44.3 Ft-lb/3-60N-m), 34mm Adjustable Jaw Open End Torque Wrench Accuracy CW ±2% CCW±3%, LCD Display Buzzer & LED Indicator for HVAC Torquing Down Nut

  • ...“beep”, then press the ▲ or ▼ key to set the torque value. The flashing number indicates the value you are currently setting. After the setting is completed, short press the U/S key to move the number, and short press the C key to save the setting. Operation is quick and easy..
  • 【Two Measurement Modes】The digital torque wrench has two modes: Peak Mode/Track Mode. The peak mode force release shows the maximum torque value, the data is automatically saved in the background program, and a total of 50 sets of data can be saved. Track mode can display real-time torque values. You can configure the measurement mode as required. Buzzer and LED notification when target torque is reached..
  • 【Torque Range 2.2-44.3 Ft-lb/3-60 N.m】 The torque value range of digital open end torque wrench is ( 2.2-44.3 Ft-lb/3-60 N.m). In kgf.cm / Nm /lbf.ft /lbf.in, the clockwise direction accuracy is ±2%, and the counterclockwise direction accuracy is ±3%. Reliable and accurate measurement data increases your productivity..
  • 【LCD Display】The adjustable torque wrench adopts double-layer screen protection to be more resistant to falling, and the large color LCD display allows you to view the data more clearly and reduce errors. The highly backlit screen display ca....
Check Stock

TAGVIT Digital Torque Wrench (12.54-250.8 ft-lbs./17-340Nm), 1/2 Inch Drive Electronic Torque Wrench with Angle, ±2% CW Torque Accuracy with Buzzer and LED Flash Notification for Bike Motorcycle Car

  • Four Torque Measurement Units: This digital torque wrench can measure from 12.54-250.8 ft-lbs./17-340Nm, with easy to read LED display, available in Nm, Ft-lb, In.lb, Kgf.cm four measurement value switching, can adapt to the application of different torque unit measurement. The angle digital torque wrench has an accuracy of ±2% clockwise and ±3% counterclockwise. Comes with a calibration certificate and conforms to ISO 6789 and ASME B107.14M standards..
  • Buzzer & LED Indicator: When the set torque is reached, the 1/2 inch torque wrench will emit a flashing light, and the buzzer will sound to remind you to stop applying force to avoid damage caused by excessive torque. The angle torque wrench provides 10 preset values, which can save the commonly used torque values and angle values, and can set the upper and lower limits of the torque value and angle value alarm, which is convenient and fast for daily use..
  • Four Measurement Modes: The 1/2 inch drive digital torque wrench has TRACK real-time mode and PEAK mode, torque mode (A1) and angle mode (A2). By quickly switching the four modes of A1&TRACK, A1&PEAK, A2&TRACK, and A2&PEAK, it can meet your different needs and usage habits..
  • Two Way Use: By adjusting the direction button on the head of the electronic....
Check Stock

EWK 3/8\ Drive 5-100 ft-lbs Digital Torque Adapter, Digital Torque Wrench Converter with Buzzer & LED Flash Notification

  • 【Easy to Use】EWK 3/8" 5-100 ft-lbs (6.8-135Nm) Digital Torque Adapter is engineered with high-quality material and feature with real-time torque values display in four torque units: Nm, cm.kg , ft-lb, and inch-pound. Offers high speed, accuracy, and an easy-to-read backlight display LCD screen..
  • 【Versatile】Ideal for​ ​engine bay maintenance​ ​and any crucial nuts tightening. Converts any ratchet wrench into a precision adjustment tool with stunningly accurate calibration for existing digital and analog torque wrenches. ※ Do not use with air wrench and electric wrench..
  • 【User Frendily】Can be used in both clockwise and counterclockwise direction. Automatically powers off when not in use for 2 minutes. Can store 30 memory setting values. Buzzer and light indication when a desired torque value is achieved..
  • 【Content】Digital Torque Adapter, CR2023 Battery, User Manual, Certificate of Calibration Report (Using ISO specification), Steel Storage Box. ※Read manual carefully before using, and then keep it for future reference..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

Craftsman 3/8-in. Dr. Digi-click Torque Wrench, 5-80 Ft. Lbs.

  • Use the Craftsman 3/8-in dr digi click torque wrench for tightening and adjusting various mechanical.
  • With an LED backlit screen, it's easy to see every readout, even in the darkest garage.
  • The digital-click torque wrench converts from ft. lb. to in. lb. and to Nm simply by touching a button.
  • Comfortable handle with ergonomic styling reduces fatigue and provides a sure grip.
  • The 3/8-inch drive click torque wrench measures from 5 to 80 ft.lb. in .25 increments.
Check Stock

VANPO 3/8-Inch Drive Digital Torque Wrench Electronic Torque Wrench 2.2-44.3 ft-lbs./3-60Nm Torque Wrench Set with Accurate to ±2% Buzzer & LED Indicator 1/4 Adapter Extension Bar for Bike Moto

  • 【Advanced LCD display】This digital torque wrench has an advanced LCD display, providing kg-cm, Nm, in-lb, ft-lb measurement values. The....
  • 【High precision & High reliability】The torque wrench indicative value is ±2% clockwise and ±3% counterclockwise, which conform to the....
  • 【Buzzer alarm】When you using the 3/8 inch drive torque wrench are on the brink of the preset torque, the LED display and buzzer sound will notify....
  • 【Two measuring modes】The bike torque wrench is made available to two modes. The PEAK mode only displays the maximum torque value, and the TRACK....
  • 【Ergonomic design】This torque wrench set also provides 1/4 adapter and extension bar. The handle design of the wrench is ergonomic and comfortable....
Check Stock

Summit Tools 1/2 inch UltraPrecision Digital Torque Wrench, 7.4-147.5 ft-lbs Range Accurate to ±1%, Set Target Torque, LED and Buzzer, Calibrated (WEP4-200CN)

  • This Summit Tools UltraPrecision Digital Torque Wrench offers a stunning ±1% accuracy that meansures between 7.4 - 147.5 ft-lbs torque range with 0.1 ft-lb resolution..
  • Set target torque and the LED & Buzzer indicator provides audible feedback when target torque is reached..
  • Large LCD display which provides measurements in kg-cm, N-m, in-lb. ft-lb. Offers Peak-Hold and Tracking modes..
  • This compact digital torque wrench can operate in tough conditions. Perfect tool for control and apply measured torque in industrial, HVAC, automotive and aerospace applications..
  • Summit digital torque wrenches are constructed from high quality stainless steel and industrial plastics. This electric torque wrench set comes with a protective case that shields it against wear & tear when not in use to deliver long lasting performance..
Check Stock

Adjustable Torque Wrench, 5 to 25 Nm 30mm Open End Torque Wrench with Click and Changeable Head for Hvac Mini Split and Refrigeration System

  • ...】--The torque wrench included a 30mm adjustable open end head. This hvac torque wrench can fit industrial, refrigeration system, hvac mini-split installation, automotive and aerospace applications control. It is also a great tool for torquing down flare nut connections on mini splits air conditioners..
  • 【Accurate Digital Wrench】--Our small torque wrench features a durable ratchet head and delivers a competent torque force range between 5-25 NM. Meaning it’s hugely versatile and suitable for a wide range of applications. It arrives pre-calibrated with a guaranteed accuracy of +/-4%..
  • 【Reliable Click Wrench】-- When the wrench’s pre-set torque value is reached, a simple and reliable mechanical operation inside the handle produces a click sound you can hear and feel, alerting you to stop applying force..
  • 【Easy to Use and Read】--The torque wrench is user friendly.
  • just pull-down the "locking ring" to unlock. Clockwise increases the value and counter clockwise decreases the value. Then push-up the "lock ring" to lock your required torque. High-contrast Nm scale is easy to read and can be operated both clockwise and counter clockwise..
Check Stock