Top 3 8 inch Chuck Reviews

PSI Woodworking CUG3418CC Utility Grip 4-Jaw Lathe Chuck System

Heavy duty chrome-plated self-centering chuck will hold your work tight & secure on midi and full size woodworking lathes.
Chuck is pre-threaded to 1" x 8tpi and includes 3/4" x 16tpi headstock spindle adaptor.
Chuck body weighs 4 lbs and is 4" in diameter.
Includes #1 step jaws 3/32" to 1-7/8" External & 11/32" to 3-3/8" Internal.
Includes #2 round jaws 1-1/2" to 3-1/8" External & 2" to 3-7/8" Internal.
Includes screw chuck, allen wrench, and a set of tightening levers.
This "C-Series" chuck is compatible with all "C-Series" jaws and accessories.

Check Stock

WEN LA432F 8-Inch Flat Lathe Chuck Jaws for Bowl Turning

Modify your current WEN lathe chuck to keep bowls properly secured.
Hold round workpieces ranging from 2. 3 to 8. 3 inches in diameter.
Easily adjust the holding diameter with the 6-position peg system.
Includes eight 1/2-inch rubber pins, eight 3/4-inch rubber pins, and 48 mounting holes.
Compatible with the WEN LA4374 3. 75-Inch 4-Jaw Lathe Chuck.

Check Stock

Renekton 3/8” Drill Chuck with 1/4” Quick Change Hex Drive, Convert Impact Driver Hammer and Wrench to Drill

DURABILITY: The chuck is high precision threaded and tapered tightly with rust-resistant Cr-coated body and sleeve electrophoretic enameling coating. All the extensions are applied with rust-proof finishing for extended service life..
HIGHLY COMPATIBLE: Classic keyed 3-jaw design securely holds a wide range of twist drills and step drill bits with 1/16” to 3/8” shank..
UNIVERSAL SHANK: Drill chuck with 1/4 inch hex shank quickly connects to any impact driver and converts to drilling function..
MULTI PURPOSE: With included 1/2” Drive by 1/4” Hex adapter, can easily transform power impact wrench to a drill, with best performance under rotation speed between 500rpm ~ 3500rpm..
INCLUDES: This complete power tool conversion kit includes keyed 3/8” drill chuck, a chuck key and a 1/2” Dr. x 1/4” Hex adaptor..

Check Stock

Chuck handtite keyless 1/2-Inch carded

For those that prefer traditional keyed drill chucks, these chucks offer precision and nearly unlimited mechanical advantage for tightening and loosening drill bits and tooling. These 1/32" - 5/8" JT33 Taper drill chucks have knurled grips and the chuck key is included..
Arbor hole tapers from .80 inches at the opening (bottom of chuck) to .78 inches 1/2" down into the arbor hole. This gives a good fit profile for getting the correct chuck for your drill press.

Check Stock

PSI Woodworking CSC3000C Barracuda Wood Lathe Key Chuck System

Includes: (1) Barracuda2 chuck body, (4) self-centering jaw sets, (1) woodworm screw chuck, (1) spindle adapter, (1) gear key, (1) Allen wrench, (8) screws, (1) storage case.
Barracuda2 chuck body is 3. 5" Diameter and weighs 2.60 lbs..
pre-threaded to 1" X 8TPI and includes 3/4" X 16TPI spindle adapter.
#1 step jaws: 3/32" To 1-3/8" & 11/16" To 2-3/8".
#2 round jaws: 7/8" To 1-1/2" &1-1/4" To 2".
With the variety of included jaws, The CSC3000C will mount most turning projects onto your Lathe.
including bowls, spindles, pens, other small turning projects, and much more.
Compatible with all additional C-Series Jaws and accessories: 7-3/4" Jumbo Flat Jaws (CJAWFJ2), 5" Small Flat Jaws (CJAWFJ1), Set of 2 Alligator Jaws (LCALJAWS), Pen Blank Drilling Jaws (CJAWPEN), 8-1/4" Super Finishing Jaws (CJAWXL), and more!.

Check Stock

Woodturning Bowl Gouge, HSS High Speed Steel Spindle Gouge, Wood Lathe Turning Tool for Carpenter

Modify your current WEN lathe chuck to keep bowls properly secured.
Hold round workpieces ranging from 2. 3 to 8. 3 inches in diameter.
Easily adjust the holding diameter with the 6-position peg system.
Includes eight 1/2-inch rubber pins, eight 3/4-inch rubber pins, and 48 mounting holes.
Compatible with the WEN LA4374 3. 75-Inch 4-Jaw Lathe Chuck.

Check Stock

uxcell Drill Chucks, 1.5-10mm Capacity 3/8-24 UNF Threaded with Chuck Key for Electric Impact Corded Cordless Drill

[SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
[CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
[3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
[APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
[MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.

Check Stock

uxcell Drill Chucks, 3/8-24UNF Threaded 1.5-10mm Capacity with Chuck Key for Electric Impact Corded Cordless Drill

[SIZE] - Clamping Range: 1/16"-3/8"(1.5-10mm), Mounting Thread: 3/8"-24UNF.
[CHUCK TYPE] - Keyed Drill Chuck, can be quick and easily replaced drill bits with chuck key(chuck key is included in the package).
[3-JAW] - Classic 3 jaws design drill chuck with excellent clamping capability. Quenching hardening and precision grinding to assure good wear-resistant.
[APPLICATIONS] - Suitable for drilling equipment such as portable drilling machine, bench drilling machines, milling machines, lathes, etc. It is compatible with many different types of drilling machines.
[MAINTENANCE] - Clean up the mechanical waste and foreign matter left in the drill chuck in time after using it. Use the appropriate chuck key for disassembly. Improper installation or disassembly of the drill chuck will increase the accuracy and runout value.

Check Stock

Festool 564535 CXS Compact Drill Set

3 tools in 1, Fast Fix enables the use of the Centrotec chuck, a keyless chuck and a right angle attachment for gaining access to tight spaces.
Tough inside and out, the CXS features sophisticated electronics that protect the tool and batteries from overcurrent, under voltage, and overheating.
An ultra-compact design weighing in at less than 2lbs means maximum comfort during extended use.
Extremely long battery life and recharge time of only 30 minutes. Keyless Chuck Capacity - 1/32 - 3/8 inch.
Service All Inclusive - Three year warranty on drill, charger and batteries.

Check Stock

PNBO Lathe Chuck 2 Inch,2-Jaw Dedicated Pen Drilling Lathe Chuck,Wood Lathe Chuck

Product 1: Perfect for pens, bowls, cups, chess pieces, and other small workpieces.
Product 1: Fits workpieces up to 12 inches long and 8 inches wide.
Product 1: 3.2-Amp motor provides over 50% more power than most 8-inch wood lathes.
Product 1: Adjust the soft start variable speed motor anywhere from 750 to 3200 RPM.
Product 2: Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects.
Product 2: Internal jaws tighten around workpieces varying from 1.6 to 2.8 inches in size.
Product 2: External jaws spread inside of workpieces with pilot holes ranging from 2 to 3.2 inches.
Product 2: Included screw chuck provides even more options for supporting your projects.

Check Stock

findmall 17Pcs MT3 Shank ER40 Chuck Spring Collet Chuck Set with Collets 1/8 Inch-1 Inch Set and Box Fit for CNC Engraving Machine and Milling Lathe Tool

Product Material: Made of high quality alloy steel.
great processing and fine making compatible with durability and toughness..
Main Parameter: ER40 clamping range: 2-26mm.
Drawbar end thread: 3/8inch-16. Accuracy: 0.0005inch..
Collet Sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1inch..
Wide Application: The brand new precision collet chuck holder for professionals and hobbyists demanding milling and drilling applications..
Package Contents: 1 x MT3 ER40 Collet Chuck.

Check Stock

LittleMachineShop.com HiTorque Deluxe Mini Mill with DRO (4190)

Variable speed goes anywhere from 100 to 1,100 RPM on the low setting and 100 to 2,500 RPM on the high setting.
18-1/8 x 4-3/4 inch table travels 11-13/16 inches along the X-axis and 5-1/8 inches along the Y-axis.
Bevel the head and column 45 degrees in either direction for angled cuts in metal, wood, plastic and more.
Compact cast iron design measures in at 23-1/4 by 22 by 29-1/2 inches in size with an 8-1/2 by 15 inch foot print.
Includes an R8 spindle taper, a pre-installed drill chuck (1/32 to 1/2 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 13-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.

Check Stock

OrangeA Collet Set CAT40 ER32 CAT40 ER16 Spring Steel Collet Chuck Tooling Package for Milling Machine

Spring Steel Design: High grade spring steel frame ensures better overall balance of tool holder assembly. Durable and long lasting. Polished body to be smooth and rust resistance. 6pcs CAT40 End Mill Holders Size: 1/4", 3/8",1/2", 5/8", 3/4", 1".
Both ER32 and ER16 Chuck Gage or projection length is 2.75".
1pcs Precision Keyless Drill Chuck 1/2 Capacity..
Great Accuracy & Speed: CAT40 collet chuck accuracy in Tenth. Collet Set: T.I.R.: 0.0003" or 5 um. Hardened and ground to ensure maximum accuracy. High concentricity. 6pcs CAT40 End Mill Holder in Projection Length: 2.5".
ER32 and ER16 Chuck Gage or projection length is 2.75". Collet Chuck of high speed is balanced to meet all industrial standard. Stable performance..
Multiple Collet Sizes: 12pcs ER32 collets set by 16th: 1/8".
10pcs ER16 collets set: 1/32", 1/16", 3/32", 1/8", 3/16", 7/32", 1/4", 5/16", 11/32", 3/8". Special angled slots increase rigidity. Better overall balance of tool holder assembly. Use with any standard ER collet chucks for coolant-thru tool applications..
Effortless To Operate: Precision collet chucks are designed to be easy to use. V-groove or/and Fully ground flange say it is easy on tool changers for le....

Check Stock