Top 3 5 Inch Hdd Bracket Reviews

ORICO 5 Bay Raid Hard Drive Enclosure Magnetic Aluminum USB 3.0 to SATA for 3.5 inch HDD Tool Free Storage Case Support 7 RAID Modes Up to 80TB(5X16TB) - NS500RU3

... LARGE CAPACITY -- Every single disk of the 3.5 usb raid enclosure can reach up to 16TB, altogether 80TB larger capacity for the enterprises big data backup and storage, also a good choice for nas expansion. The 3.5inch sata enclosure can support 3.5inch HDD and 2.5inch SSD/HDD with a bracket..
QUALITY CHIP CONTROL -- The 5 bay usb enclosure adopts three high quality chips, which has both transmission performance for fast 5Gbps and stability and can carry the huge data interaction of the enterprise, reduce the delay..
GOOD HEAT DISSIPATION PERFORMANCE -- A 92mm cooling fan built in the usb drive enclosure with honeycomb dissipation holes at the back of the 3.5 hdd enclosure, and the aluminum alloy material made the whole 5 bay external raid enclosure can helps to accelerate the flowing wind and heat dissiapation for prolong the service life of the hard drive..
12 MONTH QUALITY ASSURANCE WITH LIFETIME TECHNICAL SUPPORT - All ORICO products purchased through Amazon include an 12-month quality assurance and lifetime technical support. If for any reason, you are dissatisfied with the product, just....

Check Stock

ZRM&E 1 Set 2.5 to 3.5 Inch SSD HDD Holder Kit Metal Mounting Adapter Bracket Dock for Desktop PC SSD Server Hard Drive Tray + SATA 3.0 Cable + IDE 4P Male to SATA 15 Pin Female Power Extension Cable

Good Quality: Using precision die stamping, great assemblability, easy to install. 2mm thickened metal, non-defrmation, rapid cooling, to protect your SSD HDD up to the hilt..
High Compatibility: Supporting 2.5" hard drives such as SATA, IDE interface mechanical hard drive or SSD drives, compatible with SSD solid state disk and regular hard disks, with SATAI, SATAII, SATAIII..
Practical Use: Easily and safely install the 2.5 inch laptop hard disk onto 3.5 inch fixed support of desktop case with this metal mouting adapter bracket to use..
Easy Installation: The holes position is the same as 3.5 inch hard drive position ,the mounting adapter bracket can be put in the same place as the hard disk. Screws included for mounting the bracket onto the PC case..
Package Include: Pack of 1pcs 2.5" SSD HDD To 3.5" Mounting Adapter Brackets (Screws Included) + 1pcs SATA 3.0 Cable + 1pcs IDE to SATA Power Cable.

Check Stock

Geekworm NASPi Gemini Dual 2.5'' SATA HDD/SSD NAS Storage Kit with Safe Shutdown & Auto Power On & RAID Function for Raspberry Pi 4 Model B(Not Include Raspberry Pi 4)

...t way to create your home media center and building NAS or Web server for your Raspberry Pi 4 with dual 2.5 inch SATA HDD/SSDs..
【What's Included】NASPi Gemini is composed of three parts: X882 dual 2.5" sata hdd storage shield, NASPi Gemini metal case, heat dissipation system(include a 4010 PWM fan with metal fan bracket), and they will be packed into NASPi Gemini metal case to get a complete NASPi Gemini.
【How to Power NASPi Gemini】5Vdc +/-5% , ≥4A (Via USB C or DC jack of X882).
Recommend to power via DC jack if meet any I/O error. DO NOT power via the USB C of Raspberry Pi 4!!!.
【HDD/SSD Thickness Supported】NASPi Gemini supports HDD/SSD with a thickness not exceeding 16mm, 2.5" HDD/SSD on the market are 7mm, 9.5mm, 12mm and 15mm thickness.(Recommend to use HDD.).
【Function】Raspberry Pi 4 Dual SATA SSD Case Kit With safe shutdown, auto power on and RAID function. With 4010 PWM cooling fan, UASP supported Only..
【Wifi Description】Because the shielding of the metal cases will cause the loss of 2.4G wifi signal, only recommend to use Ethernet or 5G WiFi..
【Button Switch Operation】Press to turn on.
Press and hold for 1~2 seconds to reboot.
Press and hold for 3 seconds to safe shutdown, Press and hold for 8 seconds to force shutdown....

Check Stock

Thermaltake Level 20 HT Black Edition 4 Tempered Glass Type-C Fully Modular E-ATX Full Tower Computer Chassis with 2 140mm Top Fan Pre-Installed CA-1P6-00F1WN-00

[Clear view] - four 4mm thick Tempered Glass panels protect the chassis while providing easy access to the components.
[Patented rotational radiator bracket design] - place the radiator bracket vertically or horizontally for custom loop design.
[Extreme Liquid Cooling system] - Dual loop Liquid Cooling system ensures the best performance form the best features and fitment.
[Aio supported] - capable of fit up to 360mm AIO at the bottom or the side of the case.
[4+1 drive bay] – 2. 5"/3. 5" X 4 with HDD cage + 2. 5" X 1 with HDD bracket.

Check Stock

SSD Bracket 2.5 to 3.5 Adapter, FXAVA SSD Mounting Bracke SSD Bracket 2.5 to 3.5 Adapter SSD HDD Metal Mounting Bracket Adapter Hard Drive Holder for PC SSD 2Pack

2.5" To 3.5" - 2.5" To 3.5" Mounting Adapter Bracket SSD Caddy, Support 2.5" hard drives (SSD and HDD) of laptop, compatible with SATA I, SATA II, SATA III..
SCREWS INCLUDED- 16 pcs(8pcs per adapter) screws included for each 2.5 to 3.5 bracket to ensure you can mount the bracket onto the PC case. 4 screw holes are designed on the SSD Bracket Mounting Adapter Bracket, which precisely corresponds to the 4 screw holes on the hard drive..
Easy to install 2.5" to 3.5" mounting adapter bracket. Suitable for HDD/SSD.
Metal Material- Our ssd mounting bracket is made of metal,which could strengthen the heat-sinking capability, so provides your hard drive a full protection..
Package Include: 2 x ssd mounting bracket 2.5 to 3.5 , 16x Screw.

Check Stock

PASOW 2.5'' 3.5'' to 5.25'' SSD HDD Mounting Bracket Internal Hard Disk Drive Bays Holder Adapter for PC

You can use it for 2 drives,2.5" SSD and 3.5" HDD.Allow to mount a 3.5 inch drive and a 2.5 inch drive (or a 8cm fan) to a 5.25 inch drive bay in your computer case at the same time..
Converts an available 5.25" HDD bay drive to accommodate 3.5" HDD or 2.5'' SSD (Solid State Drive)..
Compatible with any 2.5 or 3.5 inch IDE,SATA or SAS Hard Drive and Solid State Disk..
Mounting the 2.5'' drive firstly when you mount 3.5'' drive and 2.5'' drive at the same time,you can mount 8cm fan at the back if not mount 2.5'' hard disk..
Made of plastic body,quick and easy installation.

Check Stock

Hard Drive Enclosure RSHTECH USB 3.0 to SATA Aluminum External Hard Drive Dock Case for 3.5 inch HDD SSD up to 16TB Drives Support UASP RSH-339

Broad Compatibility: The new version of RSH-339 Computer hard drive enclosures support 3.5 inch SATA I/II/III /HDD SSD up to 16 TB hard drives.....
Multiple protection: Aluminum housing, Plug and Play, no drivers required. The external hard drive case with independent 12V/2A power supply using....
6Gbps Data Transfer Rates: The SATA interface of the USB 3.0 enclosure supports 6Gbps max transfer speed and UASP (USB Attached SCSI Protocol). To....
Automatic Sleep Function: Entering sleep mode after 10 minutes of data access inactivity. Electronic power button, long press 3 seconds to turn it....
Better Cooling 3.5 enclosure: Aluminum HDD case with vents in the bottom, you can dock the HDD enclosure in the ABS bracket vertically to get better....

Check Stock

DELL 1P7DP Dell 2TB 7.2K NL SAS Hard Drive 3.5in

【Compatibility】3.5-inch Drive Bay models.
PowerEdge 13th Generation R230, R330, T330, R430, T430, R530, T630, R730, R730xd, R930, XC430, XC730, XC730xd.
PowerEdge 12th Generation R320, R420, T420, R520, T620, R720, R720XD.
PowerEdge 11th Generation R310, T310, R410, R415, T410, R510, R515, T610, R710, T710.
PowerVault MD3600, MD3400, MD3200, NX3000, MD1200, MD1400.
【What you get 】1pcs pack 3.5 inch Hard Drive PowerEdge Caddy accessory for Dell PowerEdge Servers and 3.5 to 2.5 HDD Adapter Bracket.
【Part number】Generation 11 and 12 PowerEdge servers and PowerVault arrays.
Compatibility with part numbers KG1CH, F238F, 0G302D, 58CWC, 058CWC, G302D, X968D, 9W8C4, 09W8C4 and 0x968D.

Check Stock

ORICO 3.5 Hard Drive Enclosure Type-C to SATA III Aluminum 5 Bay Raid External HDD Enclosure Up to 80TB Support RAID 0/1/3/5/10/JBOD/ClONE/Normal-WS500RC3

...enclosure adopts high performance master control scheme, and set with SATA3.0 interface, the data transfer rate of the sata 3 enclosure can reach up to 5Gbps with the A to C data cable, which can effectively improve the rate by about 20% than USB2.0.
[Screw Installation] - You need to loosen the cover screws and the bracket screws when install your hard drive in the drive bay enclosure. Multi protection for the hard drive and the data safety, flexible the open and install way of the 5 bay hdd enclosure, ensure the data in a safe environment.

Check Stock

ORICO 5 Bay Hard Drive Enclosure Raid USB3.0 to SATA Aluminum 3.5 External HDD/SSD Storage Drive Enclosure Data Safe Protection for Enterprise Backup Up to 80TB 5x16 -WS500RU3

...o 5Gbps] - This 4 bay hard drive enclosure supports all 3.5" SATA (I / II / III) hard disks, USB3.0 to SATA3.0 dual high-speed transmission that the speed up to 5Gbps, backward compatible with USB 2.0 / 1.1, Activity LED indicator disk access status.
[Screw Installation] - You need to loosen the cover screws and the bracket screws when install your hard drive in the drive bay enclosure. Multi protection for the hard drive and the data safety, flexible the open and install way of the 5 bay hdd enclosure, ensure the data in a safe environment.

Check Stock

Thermaltake Level 20 HT Snow Edition 4 Tempered Glass Type-C Fully Modular E-ATX Full Tower Computer Chassis with 2 140mm Top Fan Pre-Installed CA-1P6-00F6WN-00

[Clear view] – four 4mm thick Tempered Glass panels protect the chassis while providing easy access to the components.
[Patented rotational radiator bracket design] – place the radiator bracket vertically or horizontally for custom loop design.
[Extreme Liquid Cooling system] – Dual loop Liquid Cooling system ensures the best performance form the best features and fitment.
[Aio supported] – capable of fit up to 360mm AIO at the bottom or the side of the case.
[4+1 drive bay] – 2. 5″/3.5″ X 4 with HDD cage + 2.5″ X 1 with HDD bracket.
Two 140mm top fan with Removable filters pre-installed.
Supports Mini ITX, Micro ATX, ATX, E-ATX motherboard.
I/O port – Type-C x 1, USB 3.0 x 1, USB 2.0 x 2, HD Audio x 1.
Max CPU cooler height: 260mm/ Max VGA length: 400mm/ Max PSU length: 200mm.
Dimension – 23.13″ X 18.43″ X 19.8″/ 45.28 lbs.

Check Stock

Deal4GO SATA Interposer Board D3P25 LS-J106P to NVMe M.2 SSD Hard Drive SSD-3 & SSD-4 w/ 2.5

Heatsink Part Number(s): 3JTF8, 03JTF8, CN-03JTF8. 30-pin Cable D P/N: 2JH8P, 02JH8P, CN-02JH8P. 50-pin Cable D P/N: 5F1WR, 5F1WR, CN-05F1WR.
SATA interposer Board Part Number(s): D3P25, 0D3P25, CN-0D3P25, LS-J106P. HDD Bracket P/N: 0R24Y6, R24Y6, FDQ70_SSD_SLED_BRACKET_SUB_ASSY, AM2RE000400..
Each Pack come with 1x SATA interposer Board, 1x 2.5″ HDD Bracket, 2x M.2 2280 Heatsink, 1x 30-pin Cable, 1x 50-pin Cable, 8x Screws..
These parts to help you install the TWO M.2 SSD by 2.5″ HDD bay additional (SSD-3 & SSD-4 Slots)..
Compatible with Dell Alienware Area-51m R2 series ONLY..

Check Stock

Phanteks Enthoo Pro Full Tower Chassis with Window Cases PH-ES614P_BK,Black

Enthoo Pro includes 1 x 200mm fan in front and 1 x 140mm fan in the rear. Ability to upgrade to additional fans is possible. All fans included are Phanteks’ new redesigned and better performing SP series fans. Budget friendly case. 2 x USB 3.0, USB-C GEN 2, Mic, Headphone Front Port.
Appearance: Brushed plastic with an aluminum appearance.
Stealth interior: hidden PSU / hidden HDD.
The PWM hub makes it possible to control all the connected fans (also 3-pin fans) with PWM function through 1 PWM connector and create a better cable management.
Extensive water cooling support. Provides up to 4 diff installation areas for radiators vary from single to triple (120mm & 140mm form factors). Clearance for push-pull fan configurations.
Innovative liquid cooling mounting systems.Closed HDD panel strengthens the chassis’ rigidity, even when both HDD cages are removed. Removable Drop-n-Lock SSD bracket that can be installed on 2 different locations. (1 bracket incl.).

Check Stock