Top 2hp Surface Drive Reviews

VEVOR 212CC Torque Converter Kit Go Kart 30 Series 6.5 HP Mini Bike Comet Clutch Set 3/4 Inch 10T #40 or 41 Chain Predator Driver Pulley Replacement Comet TAV2 Go-Kart Torque Converter

FOR 212CC 2HP-7HP GO KART TORQUE CONVERTER: This go-kart torque converter clutch kit is made of high-quality iron and aluminum materials, lightweight, sturdy and durable.
it can reduce the engine load and get more power..
30 SERIES GO KART CLUTCH KIT: This kart torque converter has a 3/4″ and a 5/8″ drive clutch, suitable for all engines with 3/4 “straight crankshaft.The 3/4″ drive clutch contains a 10 tooth sprocket for # 40/41 chains.The Belt length: 70.5cm / 27.76″, Outside circumference: 27″（68.8cm / 27″), Width is 3/4”.（1.9cm / 0.75″). Center to Center of driver and driven: 6.7″（17cm / 6.7″)..
UNIT REPLACES: This go-cart torque converter kit replaces OEM part numbers: Comet 218353A, 219552A, 219456A, 217610A, 203814A, TAV2 30-75, Yelf Dog Drive Unit Q43201W.Replaces for Comet Manco Go Karts..
COMPLETE ACCESSORIES: The torque converter clutch includes： 1x 3/4″ drive clutch； 1x 5/8″ drive clutch； 1 x Plastic Assy Cover；1 x Aluminum Mounting Plate；1 x Drive Belt； 1 x 10 Tooth Sprocket for #40/41/420 Chain； full mounting hardware. Fully equipped, worry-free installation..

Check Stock

Kasco 1HP VFX Series Aerating Pond Fountain - 120V Single Phase with 100 ft Electric Power Cord | RGB LED Lighting | Efficient Pond Aeration Systems

1/2HP VFX Series decorative pond fountain and LED Composite Lighting.
Comes with timer control panel with GFCI protection and 3 snap on light fixtures.
Operates in as little as 15 in. of water.
120 volt configuration with 100’ power cord and 2 mooring lines.
2 year limited warranty – complete packages are ETL approved to CSA and UL standards.

Check Stock

Star 1/2 HP Submersible Well Pump with Carbon Steel Shell (3 Wire) 4 Inch, 230 Volt, 10 GPM, 4H10G05301

1/2HP 4 Inch submersible well pump with powder-coated and corrosion resistant carbon-steel shell and 1-1/4 Inch discharge that has a built-in check valve that is removable, internal, and positive-sealing.
Rated at 7 GPM water pumping capacity - Great for small homes, cottages and light water usage applications - requires a 4" (10 cm) minimum inside well diameter.
Quiet and economical operation with no priming required - Features a stainless steel motor shell and drive shaft for quiet operation and stainless steel hex drive shaft with one-piece stainless steel motor-to-shaft coupling.
NEMA standard 3 wire motor with ground wire - this 230 Volt well pump requires a control box (sold separately) and comes with a splice kit for completing all electrical connections.
100% Factory Tested - Will pump water from 100 feet.

Check Stock

30 Series 6.5 HP 212CC Torque Converter Clutch Driver Pulley Go Kart/Mini Bike Comet Manco 3/4' Bore Max Torque Replaces,with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589

【30 Series Torque Converter and Go Kart Drive Belt】：New 30 Series 6.5 HP Go Kart/Mini Bike Torque Converter Clutch Driver Pulley Replacement Comet Manco 212CC. Recommended engine: 2HP-8HP. Interchanges with part numbers 219552A 30 Series Torque Converter Driver Clutch.3/4″ Bore Max Torque, with 30 Series Go Kart Drive Belt Replace Manco 5959 / Comet 203589..
【Torque Converter】：This 3/4″ Torque Converter is a direct replacement kit for the most popular Comet TAV2 go-kart torque converter 30 series..
【Wide Use–torque converter 3/4】: Small engine Torque Converter clutches are heavily used in go karts, mini bikes, and lawn mowers.For Go Kart, Mini Bike, Lawnmower, small tractors, Fun Kart, Golf Karts, mini choppers, ATV, motorcycles, and waterski winches etc..
【Go Kart Drive Belt】: 30 Series Go Kart Drive Belt torque converter belt Replaces For manco 5959/comet 203589 murray 12-8487 baja Motorsports BB65-395 ken-Bar 300-009 255-299 rotary 8487. Width: 0.4″, Length: 27-1/32″..
【Wide Use–go kart clutch belt】: The go-kart drive belt used on most Manco, American Sportworks and Ken-bar Karts with 5hp-7hp engines.Also used on the Comet TAV2 bolt on torque-a-verter kit.Center to center spacing for the driver and driven pulley ne....

Check Stock

Craftsman Garage Door Opener Gear Shaft Spindle fits 41C4220A or 41A2817 + Lubriplate Grease 1.75oz

If your Garage Door Opener is a 1/2hp or 1/3hp CHAIN DRIVE model with a production date of 1984 to present this gear shaft will be compatible..
Production date will be located on the back of the operator motor head..
Fits these Chamberlain Models: 1100 1200 2100 2200 4100 4200 CG40 CG40D CG42D PD100 PD200 PD210 PD210D PD212 PD212D PD600 PD610 PD610D PD612KLD PD612K 5100 6200 7200 7220 7320 7420 7520D 4893OD HD200D..

Check Stock

Camp Chef Universal Fry Griddle

Fits Models: BS40C, BS60C, MS2, MS2HP, MS2PP, C-OVEN.

Check Stock

Chamberlain Wd832Kev Garage Door Opener, ½ Hp, Ultra-Quiet Belt Drive Operation, Myq Smartphone Control Enabled (Internet Gateway Sold Separately), Includes 2-3 Button Remotes, Keyless Entry Keypad, Multi-Function Wall Control Panel

Ultra quiet & strong 1/2hp belt drive garage door opener features steel reinforced belt drive and Chamberlain’s Motor Vibration isolation System to eliminate power head vibration for reduced noise.
MyQ enabled technology allows you to use your smartphone to monitor and control your garage door opener.
(MyQ Internet Gateway CIGBU required and sold separately).
The timer to close feature automatically close the garage door if you forget, and it can be set for one, five, or 10.
The protector system safety sensors with rapid snap brackets project an invisible light beam across the garage door opening and automatically reverse the door if anything interrupts the beam while the door is going down.
Quick install rail system provides faster and easier installation: assembles in 60 seconds, home link compatible compatible bridge (not included) necessary for certain vehicles.

Check Stock

Mud Mixer Portable Wheeled Mudmixer

POWERFUL MOTOR: Our concrete mixer features a 1/2HP 120V/60Hz 3.5A electric direct-drive motor (375W), making it perfect for medium-size building projects, farm work, and home use. Capable of handling cement, mortar, stucco, and other materials..
EASY TO OPERATE: With a 4.2 Cu.Ft. capacity and a low-profile design, our concrete mixer machine is perfect for pouring into forms, wheelbarrows, and moving around job sites. Its non-slip handle with safe lock ensures the drum stays securely in place while in use..
STABLE AND DURABLE: Made of high-quality steel, our cement mixer is built to last. Its triangular stand with wheels provides stability and makes it easy to move the machine around..
LABOR-SAVING AND PRACTICAL: Equipped with 7-inch solid rubber wheels, our concrete mixer can be easily moved forward or backward, saving you time and labor costs. Compared to manual cement mixers, our electric mixer is a more efficient option..
EXCELLENT CUSTOMER SERVICE: Our industrial/agricultural mixers are easy to assemble and use. We provide 24-hour customer service for any after-sales or product issues. All required hardware and installation manuals are included..

Check Stock

Leviton 5604-2W 15 Amp, 120/277 Volt, Decora Rocker 4-Way AC Quiet Switch, Residential Grade, Grounding, White

Switch frame shields against dust and fits in wallplate to prevent rocker binding.
Terminal screws accept up to No. 12 AWG, HP Rating: 1/2HP-120V 2HP-240V-277V.
Sturdy construction for long service life.
Full-rated current capacity with tungsten, fluorescent or resistive loads. Motor capacity is 80% of switch rating.

Check Stock

MOUNTO 2-Speed 1/2HP 2200CFM Air Mover Floor Carpet Dryers (Blue)

HIGH VELOCITY - 2200cfm 1/2hp 2speed setting Air Mover which is perfect for drying the floor, carpet, hallway, or garage..
HEAVY-DUTY -Roto-mold housing which perfectly for commercial and industrial environments.
MULTI-USE - 3 direction (0,45,90 degree ) perfect for spills, paint, rugs, and other surface will dry in no time.
RELIABLE - Durable long lasting roto molded housing work for years. Attached Cord 20 Ft.
PORTABLE AND LIGHTWEIGHT - This unit is only 25lb lightweight and perfect for use in crawl spaces, cabinets, closets, or any other cramped area you may need to dry.

Check Stock

NEW SCHULZ SINGLE STAGE CAST IRON AIR COMPRESSOR PUMP 2, 3 OR 5 HP + FREE FILTER

MSL-18MAX SCHULZ INDUSTRIAL GRADE SINGLE STAGE AIR COMPRESSOR PUMP FOR 2HP, 3HP, 4HP AND 5HP APPLICATIONS.
12 MONTH WARRANTY, PUMP SPECIFICALLY DESIGNED FOR 2HP - 5HP 56FRAME ELECTRIC MOTORS RATED BETWEEN 15-20 AMPS, FREE IN-TAKE FILTER INCLUDED.
18 CFM DISPLACEMENT MAX, 42 LB CAST IRON 2 CYLINDER PUMP, MAXIMUM PRESSURE 125 PSI.
MANUFACTURERS SUGGESTED RPM 1190, PUMP FLYWHEEL 11.5" OUTSIDE DIAMETER SINGLE GROOVE FOR ONE BELT, 1/2" TOP WIDTH A/4L SECTION BELT. BELT NOT INCLUDED.
PLEASE READ DESCRIPTION FOR FULL DETAILS, DIMENSIONAL DATA CAN BE VIEWED ON ATTACHED PICS.

Check Stock

DYXJB Stainless Steel Waterfall Outlet Garden Pond Heaters Fish Pond Landscape, Waterfall Fountain for Swimming Pool and Garden (Color : Color, Size : 1.2m/4FT)

1/2HP display aerator – float not included.
Offers reliable aeration benefits for backyard ponds, fish farms, industrial applications and much more..
Optional lighting packages and control panels available.
120 volt configuration with 50’ power cord and 3 mooring lines.
2 year limited warranty – complete packages are ETL approved to CSA and UL standards.

Check Stock

BILT HARD 12 inch Variable Speed Drill Press, with Laser & Worklight, 5 Amp Benchtop Drilling Machine

Powerful: CSA Certified, 12" swing, 3-1/8" spindle travel, 5/8" keyed chuck, 1/2hp induction motor 120V.
Variable Speed: from 580 to 3200 RPM with LCD display (ONLY adjust speed after POWER ON)..
Laser Precision: X-pattern laser for accurate drilling (adjust the laser before using)..
Worklight: with onboard work light, light up the work area..
Worktable: the worktable can rotate 360°, bevel 45 degree left & right..
Sturdy Construction: the cast iron base ensures durability, with predrilled holes for easy mounting to the benchtop or work surface..
WARRANTY - We guarantee this product to be free from defects in materials and workmanship 30 days from the date of purchase. Our support team is on standby for YOU..

Check Stock