Top 22mm Non Return Valve Plastic Reviews

Tektall 2 Pack 10mm 3/8" Aluminum Alloy Non-Return One Way Check Valve for Fuel Line Oil Petrol Diesel,with 4Pcs Universal Adjustable Hose Clamps.

...ked on valve, showing fluid flow direction, preventing fuel from returning back to the tank and keeps it in the line.So this one way valve can perfectly solve your vehicle's hard or slow startup issues..
【Good Quality】 Tektall non return check valve is made of high-quality aluminum alloy, the life is longer than plastic oil valve, and this check valve is more durable and corrosion-resistant strong..
【Easy to Replace】 According to the little arrow on the valve, connect the fuel line.Then using the hose clapms and screwdriver to ensure the pipes don't drop off and keep tightly. This simple design make the check valves has a small size and easy to install, making maintenance easier and more efficient..
【Wide Applications】 This one-way check valve is installed in many low pressure fuel systems / diesel / Carburetors and bio fuel systems where fuel to only flow one way, suitable for petrol, diesel, water, oil. It universal can be used on any UTV, quad, dirtbike, jetski, waverunner, boat, truck, car, motorcycle, tractor, camper, lawn mower, blower, pressure washer, etc..
【Working parameters】 The minimum upstream pressure required to operate the aluminum one-way check valve is 2.9psi (0.2 bar). Working pressure:2.9-87 psi (0.2-6bar) Operati....

Check Stock

BUZIFU 2pcs Air Valve Inflatable Boat Spiral Air Plugs One-way Inflation Replacement Screw Boston Valve for Rubber Dinghy Raft Kayak Pool Boat Airbeds,Black

✑【High Quality】:Made of quality high dense ABS plastic, sturdy, anti-corrosion and durable..
✑【Cap Desgin】:The air valve cap design is sealed ensures anti-leak inflation. The upside diameter/length of Threaded part is 22mm (out)/ 17mm(inner), the underside diameter/length of Threaded part is 22mm (out)/ 20mm(inner) .Please check size to make sure whether your valve bung fit this plug before purchase..
✑【Special Rubber Pad】:The bottom of the air plug has a rubber mat which can prevent leaks more effectively,give you safer protection.One-way inflation valve, quickly inflated..
✑【Quickly Inflation & Deflation】: It will fit into a hole that is about 20mm/0.78 inch, boston valve to help quicker inflation and deflation.Easy to fit, good performance and long serve life..
✑【Come in Pair】: Good replacement accessory for your inflatable boat. Fits most inflatable boat, raft, rubber dinghy, etc. Pl pay attention to the size before purchase, and our gas nozzles are not all suitable for all sizes of airbeds and inflatable boats, special size not applicable, like netted ship..

Check Stock

ALEGI Aquarium Air Pump Accessories with Non-Return Check Valves,Air Control Valve for 3/16\ Aquarium Tubing (6 Check valves+6 Control Valve) (Red)

Package Included : 6 Pcs Non-Return Check Valves and 6 Pcs Aquarium Air Control Valve..
【Non-Return Check Valves】Small and compact, which protect you air pump by preventing aquarium water from back siphoning during a power outage..
Made of quality plastic, durable and sturdy, not easy to break, ensure long time of usage.
【Air Control Valve】Simple design for easy use. The Aquaculture Air Valve can be connected to aquarium tubing..

Check Stock

2\ (50 mm) ToolMaker's Parallel Clamp CRAFT DIY Tool

... high wear resistance and long service life..
【INTEGRAL PORTABLE DESIGN】 Huanyu Integral hydraulic flange separator is handheld, easy to carry and can be easily operated by one person. No external tank or hose required. Thickened insulating handle is anti-electric, non-slip.Comfortable grip, more labor-saving. A plastic storage box is included, which is shockproof, portable, easy to carry..
【EASY TO OPERATE】 Rotate the pressure relief valve switch to operate. Rotate in (on) direction during pressurization and (off) direction during pressure relief. Suitable for pipeline maintenance, repairment, inspection and valve replacement etc..
【EXCELLENT SERVICE】 We provide 1 year warranty on all products in our store. For damaged parts, we will resend a new one free of charge for customers to replace. Besides, we provide one-to-one online after-sales consultation service for every consumer with high efficiency, bringing you worry free shopping experience..

Check Stock

Pop-It Tool P95-525 Flange Spreader

... high wear resistance and long service life..
【INTEGRAL PORTABLE DESIGN】 Huanyu Integral hydraulic flange separator is handheld, easy to carry and can be easily operated by one person. No external tank or hose required. Thickened insulating handle is anti-electric, non-slip.Comfortable grip, more labor-saving. A plastic storage box is included, which is shockproof, portable, easy to carry..
【EASY TO OPERATE】 Rotate the pressure relief valve switch to operate. Rotate in (on) direction during pressurization and (off) direction during pressure relief. Suitable for pipeline maintenance, repairment, inspection and valve replacement etc..
【EXCELLENT SERVICE】 We provide 1 year warranty on all products in our store. For damaged parts, we will resend a new one free of charge for customers to replace. Besides, we provide one-to-one online after-sales consultation service for every consumer with high efficiency, bringing you worry free shopping experience..

Check Stock

MaySpare Gas Tank Fuel Valve Petcock Switch Compatible with Harley Sportster Big Twin and Custom Tanks 1975-2006, 22mm Petcock Fuel Valve Left Spigot

Petcock Fuel Valve Compatible with Harley Dyna Fatboy Heritage Softail Springer Sport Glide Sportster 1000/Replace 62167-81 62168-81 62163-75 011401.
This petcock is highly polished and chrome plated. Packing includes a pre-filter attached to prevent sediment from entering the carburetors..
Threading: 22mm x 1.0mm / Compatible with 1/4" Fuel Line /3 Positions (On, Off and Reserve).
Gas Tank Fuel Valve Petcock Switch is Easy to use, with clear on/off marking on the cock for easy installation.The fuel tank petcock valve has 1/4’’ 90 degree left side outlet and includes nylon mesh filter screen..
100% high quality & Oem Match, direct replacement,6 Month Warranty/ Free Return and Exchang, Full Refund.

Check Stock

R12 to R134A AC Retrofit Fitting Adapter Kit, R12 R22 to R134A High/Low Fitting Port Retrofit 1/4’’ to 7/16'-20 UNF Conversion Adapter,Fits for AC Air Conditioner Refrigerant

【A/C Adapter】 – The AC fitting port adapter retrofit r12 to r134a is completely used to replace R12 R22 with R134A charging port 1/4″ SAE or 7/16”-20UNF adapter, perfect air conditioning conversion adapter kit..
【PREMIUM QUALITY】 – R12 to R134A retrofit fast conversion adapter kit are made of high quality metal and plastic, solid construction for high heat resistance, durability and safety..
【A/C VALVE CORES】-Applies to the replacement refrigerant valve core leak.These accessories can bear the oil, bear the impact, bear the corrosion, watertightness.
【DIMENSION】 – These Low/High side retrofits/adapters/fittings will convert your old 1/4’’ SAE or 7/16″-20 UNF R12 R22 charging port and make it accept the R134a quick disconnect hose. Low Side, 1/4’’(7/16’’- 20) x 13 mm (Blue). High Side, 1/4’’(7/16’’- 20) x 16 mm (Red)..
【PACKAGE INCLUDES】- 1 Pcs x Blue Low Side Quick Coupler, 1 Pcs x Red High Side Quick Coupler ,1Pcs Valve Core Remover,2Pcs Seal Caps,4Pcs R12 Valve Cores,2Pcs R134a Valve Cores..

Check Stock

TWCC 770 Pcs Rubber O Rings Kit 18 Size Universal Nitrile NBR Washer Gasket Assortment Set for Automotive Faucet Pressure Plumbing Sealing Repair,Air or Gas Connections,Resist Oil and Heat

{WIDE APPLICATION} O-ring kit for faucets,plumbing,pressure washer,hose nozzles,sinks,filters,hydraulics fluid,auto engines, machinery bearings,pumps,boats,oils,gas control valve, spray, air,kitchen bathroom water fitting seal leak repair.
{MULTIPLE SIZE} Metric oring assortment kits contains the most commonly used 18 size ID:(3mm, 4mm, 4.5mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 12mm, 13mm, 14mm, 17mm, 18mm, 20mm, 22mm, 25mm, 27mm) x Thk:(1mm, 2mm, 2.4mm, 2.5mm, 3mm, 4mm),can meet almost all your needs.
{MATERIAL} Rubber o rings set made of high-quality commercial grade black nitrile(NBR,Buna-N),it has excellent high temperature and low temperature resistance,the working temperature range is from -40℃/-40℉ to 120℃/248℉,maintains good elasticity,has It has the advantages of ozone resistance and weather resistance.
{CONVENIENT STORAGE} Assorted o rings rubber are placed in a sturdy plastic storage box, each size with detailed label paper,are stored in order of small to large for easy retrieval.It can be used for months or even years rather than buying them at a hardware store.
{SATISFACTION GUANTEE} TWCC brand always guarantees high-quality products and good after-sales service. If you have any unhappy,we would return your kit for free with no reason.

Check Stock

5/16 Fuel Check Valve Non-Return One Way Petrol Diesel Gas Oil Air Aluminum Alloy 8mm

Material: lightweight 6061-T6 cnc machined aluminum alloy.
Professional grade non-return valve - Ideal for marine, automotive, caravans/RV, and agriculture.
Arrow marked on valve, showing fluid flow direction, Prevents fuel from returning back to the tank and keeps it in the line.

Check Stock

Utoolmart Flexible Coolant Pipe, G1/2 Thread Flat Nozzle Coolant Pipe Hose, 16' Length Adjustable Flexible Cooling Tube with Valve, for Lathe Hydraulic Machinery and Water Cooling System, 2 Pcs

【Thread Diameter】- G1/2 Male Thread ( 20mm/0.79" diameter ).
Total Length( Approx.): 400mm / 15.7-inch.
Package Content : 2 x Flexible Coolant Pipe.
【STRAIGHTFORWARD DESIGN】- This cooling tube adopts a plastic flexible body, light weight and easy to install with any direction and angle. Designed with a convenient valve so you can easily open or close fluid..
【MATERIAL】- Made of plastic material, it features non-toxic, resistance to corrosion and tension, flexible, and long service life.
【APPLICATION FIELD】- It is widely used for lathe, milling, CNC machine, hydraulic machinery and water cooling system..
【SATISFACTION SERVICE】 We care for every customer’s feeling.If this product does not meet or exceed your expectations,please send email to us or return the item back..

Check Stock

Utoolmart Flexible Coolant Pipe, G1/4 Thread Round Nozzle Coolant Pipe Hose, 20' Length Adjustable Flexible Cooling Tube with Valve, for Lathe Hydraulic Machinery and Water Cooling System, 2 Pcs

【Thread Diameter】- G1/4 Male Thread ( 12mm/0.47" diameter ).
Total Length( Approx.): 500mm / 19.7-inch.
Package Content : 2 x Flexible Coolant Pipe.
【STRAIGHTFORWARD DESIGN】- This cooling tube adopts a plastic flexible body, light weight and easy to install with any direction and angle. Designed with a convenient valve so you can easily open or close fluid..
【MATERIAL】- Made of plastic material, it features non-toxic, resistance to corrosion and tension, flexible, and long service life.
【APPLICATION FIELD】- It is widely used for lathe, milling, CNC machine, hydraulic machinery and water cooling system..
【SATISFACTION SERVICE】 We care for every customer’s feeling.If this product does not meet or exceed your expectations,please send email to us or return the item back..

Check Stock

EVIL ENERGY 1/2 12mm Non Return One Way Check Valve for Fuel Line Oil Petrol Diesel Aluminium Silver Pack of 2

Function: The basic design of a one way check valve inhibits back flow in a line. Arrow marked on valve, showing fluid flow direction, preventing fuel....
Feature: The non return check valve body is made of high quality aluminum alloy can use longer than plastic one. Stable characteristics, high....
One-way Check valve installs in many diesel / bio fuel systems / Carburetors and low pressure fuel systems where you desire fuel to only flow one way.....
Easy installation and replacement. According to the little arrow on the valve, connect the fuel line. You can use some hose clamps which can make sure....
The minimum upstream pressure required to operate the aluminum one-way check valve is 2.9psi (0.2 bar). Working pressure:2.9-87 psi (0.2-6bar)....

Check Stock

R12 to R134A AC Retrofit Fitting Adapter Kit, R12 R22 to R134A High/Low Fitting Port Retrofit 1/4’’ to 7/16'-20 UNF Conversion Adapter, Fits for AC Air Conditioner Refrigerant

【WIDE COMPATIBLITY】 – The AC fitting port adapter retrofit r12 to r134a is completely used to replace R12 R22 with R134A charging port 1/4″ SAE or 7/16”-20UNF adapter, perfect air conditioning conversion adapter kit..
【PREMIUM QUALITY】 – R12 to R134A retrofit fast conversion adapter kit are made of high quality metal and plastic, solid construction for high heat resistance, durability and safety..
【EASY INSTALLATION】 – R12 to R134A retro fit fittings connect to the thread for use with the valve, there is a removable schrader valves., fitted with a plastic protective cover cap, easy and fast installation..
【DIMENSION】 – These Low/High side retrofits/adapters/fittings will convert your old 1/4’’ SAE or 7/16″-20 UNF R12 R22 charging port and make it accept the R134a quick disconnect hose. Low Side, 1/4’’(7/16’’- 20) x 13 mm (Blue). High Side, 1/4’’(7/16’’- 20) x 16 mm (Red)..
【1 YEAR WARRANTY】 – Order R12 R22 Port to R134a quick disconnect valve adapter from Aupoko, we offer 12 months warranty, true worry-free shopping experience. If this part ever fails please contact us for a replacement or refund in the limited time..

Check Stock