Top 2272 Decode Receiving Module Reviews

Baluue 10pcs Vibration Sensor Module Normally Closed Alarm Switch Module High Sensitive Efficient Vibration Switch Module for Car Truck Auto Vehicle

TCRT5000 infrared emitting diode constantly launch infrared sensor, the infrared ray is emitted when reflected back were not reflected or but strength is not big enough, the infrared receiving tube has been in the off state, the output end of the module at this time as the low level, indicating diode has been put out state.
Tested objects appear within the scope of testing, infrared light is reflected back and strength is enough big, infrared receiving tube saturation, at this time the output of the module for the high level, indicating diode lit up..

Check Stock

RF Coax to HDMI DVI Demodulator Analog UHF VHF CATV Tuner for NTSC System

Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs. Supports all coax signals coming from cable....
Professional grade agile RF coax demodulator for converting the RF coax cable TV. External add-on TV tuner module for LCD TV, HD monitor/projector....
Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details. [Note]: This is an analog TV tuner so....
Great RF coax to HDMI audio decoder for streamline setup with new home A/V receiver or home theater system. Easy operation control via IR remote....
Automatic video/audio gain control for compensating the input signal level variation for the best broadcast quality performance. Supports last channel....

Check Stock

HC-05 Wireless Bluetooth Receiver RF Transceiver Module Serial Port Transmitter Module

RXD: the receiver, Bluetooth module receives from another device sent data.
normally connected to other devices transmitting end TXD?.
TXD: sending end, the Bluetooth module to send data to other devices.
receiving terminal is normally connected to other devices RXD.

Check Stock

Abovehill 12V Wireless RF Remote Control Relay Switch Universal 1-Channel 315MHz Receiver with 1 Transmitters for Garage Door Openers, Cars, LED Lights & More

[Wireless Remote Control Module] Its coding type is fixed code and learning code. The control mode is three modes: jog, self-lock and interlock. Delivery defaults to jog mode. If you need to switch to self-locking or interlock mode. You need to change the contacts labeled “L” and “T” on the back of the receiving module..
[Wireless Remote Control Module] It also has learning and deletion capabilities. The operation is very simple and detailed in the product description..
[Wireless Remote Control Module] A wide range of applications, from simple home remote control to autonomous control, such as windows, entrances, garage doors, alarm systems, lifting equipment, etc. Note: If you encounter any problems, please send us an email and we will be here to help you. Thank you..

Check Stock

PC Interface Controller

【One-year after-sale warranty】The PWM to voltage module converts PWM digital signals to 0 to 10V analog signals. It can be used to switch the signal interface of PLC or other industrial control board. Adjust the output voltage by adjusting the PWM duty cycle. The module is small in size and easy to apply in different places.003cbr003e.
Using MCU embedded technology. Easy to operate, can be fine-tuned by potentiometer.003cbr003e.
Select the PWM signal input level range by short circuit. The module is small, easy to carry and easy to use.003cbr003e.
(current greater than 100mA)，PWM signal receiving frequency range: 1KHZ-3KHZ.
When power on for the first time, it is best to do a calibration and debugging: find a signal with a 50% duty cycle and connect it to PWM and GND. Jumper caps set the corresponding voltage range. When the frequency is 1KHZ-3KHZ, use a multimeter to measure the two ports of VOUT and GND. At this time, the meter displays about 5V. Adjust the potentiometer on the board so that the multimeter displays 5.00v.003cbr003e.

Check Stock

AllAboutAdapters RF Coax to HDMI VGA Component YPbPr Video Demodulator TV Tuner for NTSC System

2-In-1 RF coax TV tuner solution for decoding RF coax CATV signals into 1080p HDMI output or HD Component YPbPr video audio output. Professional grade agile RF coax demodulator for converting the RF coax cable TV signals into either 1080p HDMI or DVI output at 1920x1080 pixels. Decode all UHF/VHF channels, analog cable TV channels, satellite RF output and other modulated outputs..
Supports all coax signals coming from cable outlets or cable boxes with RF output only, satellite receivers or modulated CCTV security systems. Premium external TV tuner module for MATV/SMATV systems used in campus, classrooms, hotels, hospitals, sports bars or restaurants. Full-frequency analog NTSC cable channel support from CH2 to CH139. Full aerial VHF/UHF channel support from CH2 to CH83. Backward compatible with all DVI equipments via using HDMI to DVI adapter..
Easy replacement solution for HDTVs with broken coax tuner inputs. External add-on TV tuner module for LCD TV, HD monitor/projector without coax inputs. Advanced HD video processor with digital comb filter for smooth digital video/audio output. Premium de-Interlacer with low noise reduction technology adopted for clear and sharp images with fine details..
Multiple of these RF demodulator/tuner units can work....

Check Stock

Onyehn 1set Wireless Bluetooth WiFi card Module Board with Antenna Cable Part for Xbox One Replacement Pulled

If you have any questions after receiving the goods, please contact the after-sales service. If it doesn't work, we will provide a full refund. Please....
Original and Pulled From Microsoft Xbox One Coonosle.(Note: Because it is removed in the original machine, the Bluetooth module scratches are....
Replace the WIFI Module, it Can Solve the Wireless Controller Disconnected (Broken) Problem..
If Your Controllers Don't Sync, Or If Wifi Access Points No Longer Show Up Then This Could Be the Part You Need..
Package Includes: 1 x Card Module, 1 x Antenna Cable..

Check Stock

5pcs HC-SR04 Ultrasonic Sensor Distance Sensor with Ultrasonic Transmitter and Receiver Module Compatible with Ar-duino UNO MEGA2560 Nano Robot XBee ZigBee

Induction Angle: not more than 15 degrees:....
the module HC-SR04 works: (1) IO trigger ranging to at least 10us high signal.
(2) module automatically sends eight 40kHz square wave, automatically....
Panel wiring, VCC, trig 's (control side), the echo (receiving end), out (empty feet), GND.
Note: TRIP-pin internal pull-up 10K resistor, down TRIP microcontroller IO port pin, and then to a 10us pulse signal..
OUT pin for this module as the switch output pin when the anti-theft module, ranging modules do not use this foot!.

Check Stock

TOMOLOO Hoverboard with Bluetooth Speakers and Flash Led Lights Wheels,Hover Board for Kids UL Certified Self Balancing Scooter Hoverboards Adult

【UL2272 Certified Safe! 】The kids hoverboard has passed through 100% quality inspection. It also has pedals which are anti-skidding..
【Built-in Colorful Flash LED Lights Wheels】Tomoloo hoverboards' signature colorful LED lights make for a bright and freely cruising experience,....
【Bluetooth Speakers】 Now you can safely listen to music as you ride your Tomoloo Q2C/Q3C bluetooth hoverboard..
【Dual 200W Electric Engine】4.3 miles on a single battery charge you can spend more time riding and less time plugged-in. Secured 42V/4300MAH....
【Hoverboard With Free Bag】Just contact the seller after receiving the board. Hoverboard electric scooter's hands-free operation has inspired....

Check Stock

Generic GT-U7 GPS Module GPS NEO-6M Navigation Satellite Positioning Satellite Positioning Receiver Compatible with 51 Microcontroller STM32 UO R3+ IPEX Antenna for Arduino Drone Raspberry Pi

IPEX antenna interface，Default distribution：Active antennas，5 DuPont lines.
GT-U7 module with high sensitivity, low power consumption, miniaturization and high tracking sensitivity, the coverage of positioning is greatly....
GT-U7 main module GPS module using the original UBLOX 7th generation chip, compatible with NEO-6M.USB interface, can be connected to the computer,....
Applications: Vehicle handheld devices such as PDA, vehicle monitoring phones, sharing bikes, sharing mobile power, cameras and other mobile....
Quality after-sales service, any problems with the product, we will quickly solve for you after receiving your email.

Check Stock

CDM324 Microwave Module, 24GHz 15m Doppler Radar Smart Microwave Body Induction Module Single Channel Switch Intelligent Sensor Module

...ghting system, anti-theft alarm system..
【Parameter】 Advanced low consumption PHEMT oscillator, Provide various frequency range standards: -UK,-F,Operating Temperature:-20~60℃..
【Independence】Independent transmitting and receiving route, can get the big gain. The module has many advantages such as high sensitivity, long sensing distance, wide sensing angle, high reliability, wide range of operating voltage..
【High performance】 Single channel operation. High sensibility, high flexibility, low cost, operating distance is 15m. Not influenced by temperature, humidity, noise, air flow, dust, ray etc, adaptive to terrible environment.

Check Stock

ANDELI 110V/220V 200AMP Aluminum Welding Machine Smart PFC Module Foot Switch 2T 4T & MMA TIG Welder with AC DC Pulse TIG Welding Machine TIG-250PP Package 0

【Function】AC/DC TIG, PULSE TIG, MMA. This is a multifunctional Aluminum welding machine with a voltage of 220V. The maximum output current is 200 AMP. suitable for aluminum, stainless steel and thinner metals.Equipped with 4M Welding Torch.
【LCD Displayed】It is a 110V/220V smart control welder. It is super easy and convenient to chose the welding mode, material, welding wires, tungsten rods, electorde and the workpiece thicness you need by spinning and pressing the buttons. It will show all the parameters clearly.
【PCF】ANDELI TIG-250PP is equipped with a real PFC module, the latest intelligent welding machine module, which intelligently adjusts the input current to achieve the best welding effect..
【Foot Switch】Up to 10W pedal life, excellent internal circuit design brings finer control and faster response. You can adjust the current size by the depth of the pedal..
【Safety】CE certification, Efficient customer service team, if you encounter problems when receiving the goods, you can contact us for free guidance. We will provide returns and exchanges within 30 days after receiving the goods, and provide a two-year warranty and free replacement parts..

Check Stock

Tangyy 5pcs HC-SR04 Ultrasonic Sensor, Distance Sensor with Ultrasonic Transmitter and Receiver Module fit for Raspberry Pi,MEGA2560, Robot (Blue)

Widely used: Sweepers, DIY robot cars, for raspberry pi project,It can be building a little robot to measure distances in a room under construction.
HC-SR04 Ultrasonic Sensor Module: It measures distance by sending out a sound wave at a specific frequency and receiving back that sound wave to bounce.
Good Accuracy: Power Supply :3V-5.5V DC, Detection angle: 003c15 °, Minimum target distance is 2.0cm from the end of the Voltage transducers. Maximum repeatable target distance is 2CM-150CM for a large unobstructed stationary target.
Easy to install: There are 4 pins out of the module, VCC supply 5V, and GND is ground wire. TRIG is trigger control signal input, ECHO is echo signal output, So it's a very easy interface for controller to use it ranging.
Note: The module should be inserted in the circuit before been powered to avoid producing high level of Mis-operation.

Check Stock