Top 21 Pin Cable Reviews

Traovien SATA Cables, Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard 18AWG - 1FT

Allowing you to connect an additional PSU to your ATX motherboard.
Both PSU will be powered up by one single motherboard.Use a second PSU to power multiple graphics cards.
Compatible with 24 pin and 20+4 pin ATX motherboards (1x 24 pin(20+4) male port and 2x 24 pin female ports).
Designed for intense Gamining and BitCoin Mining.
Material: 18AWG . Length: main cable 12inches + secondary cable 12inches (30cm+30cm).
Dual PSU Power Supply 24-Pin Adapter Cable for ATX Motherboard sata cable 24 pin to 2420+4) pin sata cable JBingGG Dual PSU Power Supply 24 Pin (20+4) Adapter Cable for ATX Motherboard 12-inch ( 30cm ) (24 pin to 24(20+4) pin).
Note: Be sure to recognize the direction when inserting the cable!!! Dont insert the cable backwards or insert the wrong position to prevent the device from being burned!! When inserting the cable, hold the socket of the device before inserting the cable to avoid excessive force to insert the socket pin..
How to use: Plug the 24PIN of the main power supply into the female plug and plug the other end to the motherboard, and plug the secondary power supply into another 24PIN female plug to switch the power at the same time..

Check Stock

RJ45 GPIO Pinout Breakout Board for Raspberry Pi 1A+ 1B+ 2B 3B 3B+ 3A+ 4B Zero-W

8 port(2x4) RJ45 8P8C sockets, with the module you can easily connect Raspberry Pi GPIOs and Power supply to peripheral devices through the RJ45 connector. The module support all 40pin Raspberry Pi A+ 3A+ B+ 2B 3B 3B+ 4B Zero, Zero-W..
Each RJ45 port is connected Power Supply and GND. Each RJ45 can independently choose from the Raspberry Pi 5V / 3.3V, or from blue terminal block, to supply power to external devices. The 4 5 pin of all RJ45 ports are connected to the power supply(VCC, V+), and 7 8 pin connected to GND(0V)..
RJ45 GPIO connects: Port 1: UART(RXD TXD) GPIO17 GPIO4. Port 2: SPI(SCLK CE0 MISO MOSI). Port 3: GPIO6 GPIO12 GPIO5 CE1. Port 4: GPIO21 GPIO26 GPIO20 GPIO19. Port 5: I2C(SDA, SCL) GPIO18 GPIO27. Port 6: I2C(SDA, SCL) GPIO23 GPIO22. Port 7: I2C(SDA, SCL) GPIO24 GPIO25. Port 8: I2C(SDA, SCL) GPIO13 GPIO16..
2x20pin expansion pin header, pin height 10mm/0.39".
Packing list: 1x RJ45 breakout board, 4x brass standoffs, 8x M2.5x6 screws, 8x pin jumpers. (the item not include Raspberry Pi, RJ45 cable and plug).

Check Stock

4.5 Feet DB 9 Pin Male to VGA 15 Pin Male Adapter Cable RS232 to VGA Conversion Cable YOUCHENG， for Computer,Printers Scanners

The DB 9-pin to VGA 15-pin adapter cable is a special adapter cable Some video devices are 9-pin, but our graphics cards are all 15-pin, so this cable....
Using polyethylene, HDPE inner insulation, high-fidelity design, strong anti-interference ability, reduced transmission signal attenuation, and good....
This adapter cable is only used to pass RGB signals through the 15-pin connector of the RGB to VGA converter. It cannot directly convert these RGB....
The adapter cable from DB 9-pin to VGA 15-pin is suitable for computers, notebooks, projectors, KVM switches and other video displays..

Check Stock

TAYCCEU CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable EPS 12V for Motherboard, 9.5 inch/24cm

【CPU Power Cable】EPS 12V CPU 8 Pin Female to CPU 8 Pin and ATX 4 Pin Male Power Supply Extension Cable for Motherboard..
【Easy to Install】EPS 12V CPU 8 Pin Female end to plug into 8 pin male to 8 pin male cable of power supply, CPU 8 pin and ATX 4 pin male ends to plug into the motherboard..
【Compatibility】Compatible with all PSUs - ATX, SFX, Fanless PSU. Compatible with motherboard that has 8-pin +12V socket, 4-pin +12V socket or 8-pin +12V socket and 4-pin +12V socket. It is availble to use the single CPU 8pin, single ATX 4 pin or both of CPU 8 pin + ATX 4 pin..
【Specification】Length: 9.5 inch/24cm, Gauge: 1007-18AWG(standard tin-coating copper wire), Quantity: 1pcs..
【Note】This cable is a common power supply Y-splitter extension cable, not converted cable. It supports all of power supplies with CPU 8 pin male port output. It needs to be connected to CPU 8 pin Male to Male Power Cable of PSU. Please use it correctly..

Check Stock

OBDII 6Pin 9Pin J1708 J1939 Cable for Truck

OBDII female to 6pin+9Pin truck diagnositc connect cable.This cable is compatible with many of Heavy Duty turck diagnostic tools..
OBD 6+9Pin Heavy Duty Truck diagnostic cable is in 6Pin+9pin Male(J1978+J1739) to OBDII 16Pin Female. This OBD 6pin+9pin truck cable is ok for most....
This OBD 6pin+9pin Heavy Duty Truck diagnostic cable is used for connecting your OBDII scanner to heavy duty truck with J1708 6Pin and J1939 9Pin....
Tips:Please make sure your device or scanner must have 16 pin MALE plug and MUST be able to read J1708 or CAN/J1939 and detailed (PINOUT) in picture....
Quality:Cables tested 100%. If anything, please contact with us priority and then have a further discussion. Thanks..

Check Stock

PWM Fan Extension Cable | PC Cooling Fan Power Extension Cord | Compatible with ATX Case 3 Pin & 4 Pin Cooling Fans | 10.5" Black Durable Nylon Braided Cable (4 Pack)

✔PC FAN EXTENSION CABLE 4 PIN AND 3-PIN✔ Our PWM fan splitter cable for PC motherboard cooling fans are constructed using high-quality nylon and cable is strongly braided to provide long-lasting performance as well as to avoid dust and breakage..
✔CASE FAN EXTENSION CABLE✔ The PWM fan cable is designed with the capability of expanding one motherboard PWM fan header to support internal cooling fans to reduce the load on the motherboard..
✔FAN SPLITTER CABLE WITH MANY FUNCTIONS✔ The 4pin PWM to 3pin standard fan adapter cable provides better power supply for motherboard fans, supports PWM function, speed regulation, and satisfies all your control needs to increase the lifespan of the motherboard..
✔CASE FAN POWER SPLITTER FOR 3-PIN AND 4-PIN✔ The PWM cable extension is mostly compatible with 4-pin and 3-pin PC case motherboard cooling fans.
the extension cord ergonomic design offers you a greater flexibility between motherboard and CPU cooling fans..
✔CPU FAN EXTENSION CABLE 3 PIN AND 4-PIN COMPATIBLE✔ The connector types of PWM fan extension cable includes one 4-pin Female plug connector and one 4-pin Male plug connector.
it is designed for enthusiasts with need for controlling numerous system fans..

Check Stock

16AWG GPU VGA 8 Pin PCIE Splitter to Dual 8 Pin(6+2) Power Adapter Cable,Pci Express Graphics Card GPU 8Pin Extension Power Sleeved Cable 9inch 6 Pack

..., Gigabyte, Radeon, Sapphire, NVIDIA Tesla GPU, etc..
【Simple solution】The 8 pin to dual 8 pin splitter provides a convenient solution for powering the graphics card, and provides 8 or 6-pin connectors for graphics cards that require high power..
【More Powerful Current Transmission】our 8pin to dual 8 pin pcie cable uses standard 16awg tinned copper wire, and the thicker core has lower resistance. Even if your graphics card is running at full load, our 8 pin to dual 8 pin pcie cable can safely provide power to the graphics card, and will not heat up and become soft..
【upgrade】Does your GPU exceed the capacity of the pcie power cable? want to use a single 8 pin pcie cable to drive the GPU in a low to medium wattage power supply? This is very simple. Only need to replace 18awg 8 pin pcie cable with 16awg. After repeated calculations, the peak value of the 18awg pcie 8 pin cable is about 23a, and the peak value of the 16awg 8pin pcie splitter is about 33a. Even if your GPU reaches 400w power consumption, our GPU power cable The lines can be easily adapted..
【Durable】This 8pin pcie power cable uses standard UL1007 16awg copper wire, plus braided net protection, the product length is 9 inches, 100% brand new tinned copper core，Compatible with....

Check Stock

VSDISPLAY HD-MI LCD Controller Board Work for 7' 10.1' N070ICG-LD1 (40Pin) B101EW05 LP101WX1 HSD101PWW1 N101ICG-L21 PO101WX01 1280x800 LED 40Pin LCD Panel

Can Work with: 7" 10.1" 40Pin 1280x800 LCD Panel ，N070ICG-LD1 (40Pin) B101EW05 LP101WX1 HSD101PWW1 N101ICG-L21 PO101WX01.
HDMI LCD Board Work for LVDS Interface LCD Screen，Small HDMI Board Size:74mm x 53mm x 12mm.
Recommend use Power Adapter 12Vdc more than 2A 5.5mmx2.1mm Connector.
Packing list : 1× HDMI LCD Controller Board VS-TY2660H-V1 1× 40Pin Signal Cable 1× Keyboard With Cable.

Check Stock

TRENDnet USB to Serial 9-Pin Converter Cable, Connect a RS-232 Serial Device to a USB 2.0 Port, Supports Windows & Mac, USB 1.1, USB 2.0, USB 3.0, 21 Inch Cable Length, Plug & Play, White, TU-S9

USB: The USB to serial adapter supports USB 1.1 and it is compatible with USB 2.0 and USB 3.0 ports..
RS-232 SERIAL CONNECTOR: Connect RS-232 serial devices, such as modems or printers, using the widely supported USB standard found in most laptops and desktops today..
SUPPORTED OPERATING SYSTEMS: The USB to serial converter adapter is compatible with Windows and Mac operating systems. Windows 10, 8.1, 8, 7. Mac OS 10.11, 10.10, 10.9, 10.8, 10.7, 10.6.
FLEXIBLE CABLE: Integrated and flexible 540mm (21 in.) USB 2.0 cable accommodates most installation scenarios. Total cable length of 25 inches when including the RS-232 (9pin) and USB Type A..
EASY SETUP: Simple installation in seconds of the USB to Serial 9-Pin Converter Cable. Insert the your computer.

Check Stock

Cable Matters 2-Pack 5 Pin DIN MIDI Cable, 5 Pin MIDI Cable - 6 Feet

5 pin DIN to 5 pin DIN cable connects to a MIDI keyboard controller, MIDI foot controller such as the Behringer FCB1010, MIDI analog synthesizer or MIDI sequencer such as the Korg Volca Sample, MIDI audio interface box such as the Focusrite Scarlett 18i8, electronic drum Machine and more.
Male to male 5 pin MIDI cable is wired straight through 5 pin to 5 pin to support MIDI equipment.
5 Pin 180 degree DIN connector is commonly found on MIDI equipment.
Cost-effective 2-pack of MIDI cables provides one cable to support the MIDI IN function and one cable to support MIDI OUT on a MIDI instrument panel.
Superior construction of DIN cables includes a keyed 5 pin DIN connector with easy-grip treads, molded strain-relief on each end.
Flexible cable is easy to use on the desktop and coil up when not in use with a portable MIDI keyboard.
5 pin cable with 180 degree pin configuration commonly found on musical instruments.
A lifetime warranty is included with this five pin MIDI cable 2 pack for peace of mind when purchasing.

Check Stock

TecNec TecNec JackReel-3 High Capacity Low Cost Cable Reel-by-TecNec

HIGH DURABILITY: The Cable Caddy is made with 0. 060” thick and 7/8” diameter sturdy tubular steel with two leg chains for increased stability and longer life.
EASY OPERATION: Easy to set up by just placing Cable Caddy on floor, removing cotter pin, and loading reel. Able to firmly hold cable reels weighing up to 100 lb and measuring up to 20” diameter and 17” height.
PORTABLE AND COMPACT DESIGN: Weighing 8 lb and measuring 27” high by 21” wide, the Cable Caddy is easy to store and move around job sites for convenient on the go use.
SLIP RESISTANCE FEET: Includes knurled rubber covers on legs to prevent the Cable Caddy from sliding while also protecting floors from damage.
LIFETIME USE: This tool is made for lifetime use as Jonard Tools makes high-quality tools that are designed to last a lifetime.

Check Stock

AuraTech 6 Pin J1708 + 9 Pin J1939 to 16 Pin OBD2 OBD-II Adapter Cable Heavy Duty Truck

1. obd2 to J1939 and J1708 cable 6+9 J1708/J1939 to obd Y cable Pin Truck Truck Connect Cable.
2. 6+9 Pin Truck diagnostic cable 9 Pin 6pin Male J1939 J1708 to 16 Pin J1962 OBD-II Female compatible with man diagnostic tools.
3. J1708 6 Pin J1939 9Pin to OBD2 16 Pin Female Adapter can use for most heavy duty truck,bus,…etc..
4. This cable is used for connecting your OBD2 scanner to heavy duty truck with J1708 6 Pin and J1939 9Pin socket..
5. Please make sure your device or scanner must have 16 pin MALE plug and MUST be able to read J1708 or CAN/J1939.

Check Stock

2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable

15 pin SATA to 3 pin / 4 Pin 12V PC case fan power adapter cable.
Power 3pin or 4pin (PWM Connector) PC case fan with a 15pin SATA connector.
High density black sleeving cable, 10.6 inch length, cable is backwards compatible with standard 3-pin fans.
Fans will be operated at the fixed SATA voltage of 12V.
2 Pack SATA to 3 Pin / 4 Pin PMW 12V PC Case Fan Power Adapter Cable, 3-Pin or 4-Pin (PWM Connector) to 15 Pin SATA Computer Cooler Cooling Fan Power Cable.

Check Stock