Top 201range Rover Sport Oil Type Reviews

Terrafirma Pro Sport Shock Kit STC3703 STC3941 Front And Rear For Vehicles With 2 Inches Lift On Land Rover Discovery 1 Defender 90 And Range Rover Classic

  • FIT - This front and rear shock kit fits your Land Rover Discovery I (1994-1999), Defender 90 (1994-1997), and Range Rover Classic (1987-1995).
  • DESIGN -The most popular shock for off-roading Land Rover owners, the Terrafirma Pro Sport is a true 2"(50mm) longer than standard allowing much....
  • DURABLE -The Pro Sport shocks are a super tough twin tube design with a massive 20mm shaft and 40mm piston. Low pressure nitrogen keeps the oil under....
  • QUALITY -Visually striking and stylish, Pro Sport shocks are finished with a high quality deep silver paint to resist corrosion. A bright blue....
Check Stock

URO Parts 24118612901PRM Transmission Oil Pan & Filter Kit, Aluminum Construction with Replaceable Filter, Bolts not Included

  • FIT - This transmission filter service kit is for Land Rover LR3 (2005-2009), LR4 (2010-2013), Range Rover Full Size/Full Size Supercharged (2006-2012) and Range Rover Sport/Sport Supercharged (2006-2013).
  • PRO TIP -Worn transmission fluid leads to judder, noise and a deterioration in gear change quality. ZF recommends oil and filter changes after 50,000 to 75,000 miles on all 5, 6 & 8 speed automatic gearboxes, to ensure optimum performance.
  • REPLACeMENT -Once the fluid has been drained from the transmission, simply remove the bolts from the old unit and cut the old plastic sumps filter tube with a hacksaw. Slide the old sump out and remove the other end of the sawn-off filter tube. The new separate filter can then be fitted and the new sump pan slides into place and is bolted up with the new gasket supplied.
  • CONVENIENCE - Get everything you need rather than spending more time and money getting each part separately.
  • OE REPLACEMENTS - This kit replaces OE part numbersDA2142, LR007474, LRN13754, G055005A2, 83222305396 and TZV500010.
Check Stock

Set of 2 Front Hood Lift Support Struts Gas Spring Shock for Land Rover Range Rover 2003-2012

  • YHTAUTO Affordable and Prime Lift Support Shock Struts, Directly Fit.
  • Fits Land Rover Range Rover 2003-2012 L322 Series (Not fit for Range Rover Sport/Range Rover Evoque models).
  • Reference Number: 32029656, BKK760010, 6358, E11675701CP.
Check Stock

VMS RACING 94-97 Light Weight Billet Aluminum Crankshaft CRANK PULLEY Compatible with Mazda Miata MX5 1994-1997 1.8L BP-ZE Engines ONLY OEM SIZE (uses same belts)

  • APPLICATION ENGINE -- 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN. Replace OEM 303-1437.
  • FOR VEHICLE MODEL -- For Jaguar vehicle applications include: F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 - 2018, For Land Rover vehicle applications include: Discovery 4/Discovery, For Range Rover, Range Rover Sport 2009 - 2018..
  • FUNCTION -- Set of tools required for the removal and installation of the front crankshaft pulley(Crankshaft Vibration Damper) for Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines. A must have for removing and installing for land rover jag crank pulley..
  • BENEFITS -- The crankshaft pulleys used on these engines are tightened to 200 Nm + 270 degrees, so are very tight to undo. This kit helps hold the pulleys tight. Also included in the kit are the puller component’s required to remove the pulley without damage..
  • SATISFACTION GUARANTEE -- If you are not satisfied with Camoo products, simply return it for a full refund in 30 days. Guarantee with 12 months warranty. No worry about buying!.
Check Stock

TRW Pro TRM1692 Disc Brake Pad Set For Land Rover Range Rover Sport 2014-2021, Rear, And Other Applications

  • Fits right, the first time, with all pads slotted and chamfered according to OE specifications.
  • Copper Free for less impact on the environment.
  • For confirmed fitment of this TRW Pro Disc Brake Pad Set please verify your vehicle with the Check Fit option above.
  • Fits: Land Rover Defender 110: 2020, Land Rover Discovery: 2017 - 2020, Land Rover Range Rover: 2013 - 2021, Land Rover Range Rover Sport: 2014 - 2021.
Check Stock

Crankshaft Pulley Removal Install Tool Crankshaft Damper Remover Puller Compatible with Jaguar Land Rover 3.0 V6, 5.0 V8 303-1437 303-1438 303-1439 303-1440 303-1441

  • Applicable Engine: 3.0Lt AJ-126/306PS, 5.0Lt AJ133/508PS, 508PN, OEM Equivalent 303-1437.
  • Applicable Vehicle Model: fit Jaguar F-Type, XE, XF, XFR, XJ, XJR, XK8, XKR 2009 to 2018.
  • fit Land Rover Discovery 4/Discovery, fit Range Rover, fit Range Rover Sport 2009 to 2018.
  • Remove and Install Crank Pulley: Set of tools required for the removal of the front crankshaft pulley (Crankshaft Vibration Damper) fitted to the Jaguar and Land Rover 3.0lt v6 and 5.0lt V8 petrol engines.It is a must have for removing and installing for land rover jag crank pulley.
  • Worked Perfectly: The crankshaft pulleys used on these engines are tightened to 200 Nm 270 degrees so are very tight to undo and must be held by a substantial holding tool which the kit provides. Also included in the kit are the puller component’s required to remove the pulley without damage.
  • Quality Gurante: Crankshaft crank puller pulley set made of high quality heavy steel, high hardness, strong and durable.All tools have undergone rigorous engine testing, to ensure that thecrankshaft pulley t....
Check Stock

NewYall Front Bonnet Hood Alarm Anti-Theft Switch Latch Sensor

  • For Range Rover Sport Supercharged 2006-2012.
Check Stock

TRW Pro TRH1098 Disc Brake Pad Set For Land Rover LR3 2005-2009, Front, And Other Applications

  • Fits right, the first time, with all pads slotted and chamfered according to OE specifications.
  • Copper Free for less impact on the environment.
  • For confirmed fitment of this TRW Pro Disc Brake Pad Set please verify your vehicle with the Check Fit option above.
  • Fits: Land Rover LR3: 2005 - 2009, Land Rover Range Rover: 2006 - 2009, Land Rover Range Rover Sport: 2006 - 2009.
Check Stock

Brembo P44023 Disc Brake Pad Set

  • Land Rover Range Rover 2020-2010, Range Rover Sport 2020-2010.
  • Premium stainless-steel hardware & lubricant included in most applications.
  • Minimize braking distances & provide safe braking experience in all road conditions.
  • OE-equivalent formulations specifically engineered to enhance braking power.
Check Stock

CHEYA Stainless Steel Car Cup Holder Mat Cover Trim for Landrover Range Rover Sport for Range Rover Vogue for Discovery Sport Discovery 4 Discovery 5

  • For Landrover Range Rover Sport For Range Rover Vogue For Discovery Sport Discovery 4 2015 2016 2017.
  • For Land rover Discovery 5 Landrover LR5.
  • Made of high quality stainless steel material for enhancing its strength and durability.
  • Please confirm that your model is consistent with the description before purchase, thank you.
Check Stock

X AUTOHAUX Car Center Console Cup Holder LR021330 for Land Rover LR2 LR3 LR4 Range Rover Sport

  • Fitment: for Land Rover LR3 2005-2009, for Land Rover Range Rover Sport 2006-2013, for Land Rover LR2 2009-2015, for Land Rover LR4 2010-2015, for Land Rover Range Rover 2010-2012.
  • OE Number: LR021330 Please check the OE number to see if our product fits your vehicle..
  • Quality Materials: This front center console holder is made of quality and tough materials which are durable and intends for long service life..
  • Features: Features a round compact cell to hold the cup and makes your vehicle clean and tidy..
  • Placement on Vehicle: The cup holder can be installed in the center console to keep your cup steady in the car..
Check Stock

Engine Fuel Injector Removal Tool Puller for Land Rover Range Jaguar 5.0L V8

  • Injector Removal Tool Puller for Land Rover 5.0 3.0.
  • Easy Remove Fuel Injector: Usually, Injectors on vehicles are very tough to pull in general , but this tool could easy remove fuel injector, Improve efficiency, save a lot of time, it's possible to remove injectors from a Range Rover without it, is a must tool for remove fuel injector.
  • Application: This fuel injector remover tool compatible with Land Rover/Jaguar 3.0 5.0 petrol engine, fit for Jaguar X150, XK Series, X250(XF) and XJ models (V8 5.0lt petrol engines). fit for Land Rover Discovery 4, new Range Rover, Range Rover Sport (V8 5.0lt petrol engines), replace OEM 310-197.
  • Exceed OEM Design: Our fuel injector remove tool improved on the basis of OEM, our design more easy to use, give auto repair engineers a better experience.
  • Quality Guarante: This fuel injector remover tool made of high qualuty steel, high hardness and strong endurance to ensure that it is still intact after high-strength impact, and we offer lifetime warranty..
  • Tips: Before use, please tighten the nut at the end of the slider to prevent it from slipping off during use.Hold slight downward pressure on the locking clasp as u use the slide hammer to pop the injector free,that will get better results.
Check Stock

Genuine 2006-2012 Range Rover/Sport Supercharged Badge Emblem

  • Matte silver with polished silver lettering.
Check Stock