Top 200ford F15intake Manifolds Reviews

NEW HOLLEY SNIPER EFI STEALTH KIT 4150 4 BBL FUEL INJECTION CONVERSION MASTER KIT,GOLD,870 CFM,COMPATIBLE WITH 4150 FLANGE STYLE MANIFOLDS

Brand New Holley Sniper EFI Stealth 4150 4 BBL Fuel Injection Master Kit,870 CFM, Gold, Compatible with 4150 Flange Style Manifolds (Holley Part #550-872K).
Specs: Brand: Holley Sniper EFI | CFM: 870 | Emission Code: 3 | Finish: Gold | Flange Style: 4150 | Fuel Pressure: 58.5 PSI | Height: 3.28 | Injector Size: 100 lb/hr @ 58.5 PSI | Inlet/Outlet Size: 3/4-16 Female.
Injector Size: 100 lb/hr @ 58.5 PSI | Inlet/Outlet Size: 3/4-16 Female O-Ring (AN 8) | MAP Sensor: 2Bar | Max Horsepower Rating: 650 Naturally Aspirated | Model: 4150 EFI Conversion Throttle Body | Product Type: EFI | Transmission: 700R4/200R4 Ford C4/C6 TH350.
The Sniper Stealth 4150 EFI system from Holley features 4, 100LB/HR Fuel Injectors capable of supporting up to 650 HP naturally aspirated or 600 HP on forced induction applications. The Sniper Stealth 4150 ECU is capable of fuel map self-learning and ignition timing control, improving idle stability, drivability, and wide-open throttle horsepower! Did we mention that the Stealth 4150 also includes transmission kick down provisions for GM TH350/400, 200R4/700R4 and Ford C4/C6 applications..
Master Kits include complete fuel system with an external fuel pressure regulator preset to 58.5 PSI, 20 feet of 3/8″ Vapor Guard Fuel Hose, Fuel....

Check Stock

Small Block Chevy Intake Manifold SBC Vortec Dual Plane 350 383 Intake Manifold 1996-UP Black

The intake manifolds feature a high-flow runner design to deliver improved power from idle to 6,500 rpm..
Engine Make/Size:Chevy Small Block (350,383 1997-up).

Check Stock

SharkBite 3 Loop Radiant Heating Manifold, Push to Connect Brass Plumbing Fitting, PEX Pipe, PE-RT, 24930

SHARKBITE RADIANT HEATING MANIFOLDS: PEX Radiant Manifolds ensure flow to each circuit is regulated precisely, while also controlling shut-off and allowing the venting of air from the heating system.
WHAT IS INCLUDED: This innovative radiant manifold includes (1) 1 inch FNPT inlet and (3) loops featuring integrated 1/2 inch SharkBite push-to-connect fittings.
features flow-balancing valves and flow meters to avoid waste and ensure thermal comfort.
DURABLE AND HIGH QUALITY: These heating manifolds are made with stainless steel that provides durability and protects against corrosion.
EASY TO INSTALL: The stainless steel manifold designed for use in a PEX system is easy to install with no special tools, crimping, glue, or soldering required.
SPECS: Temperature gauges on supply and return manifolds to ensure proper supply temperature and evaluate heat loss at the return manifold.

Check Stock

HOLLEY MODULAR LO-RAM EFI MANIFOLD KIT,TOP-FEED PLENUM,BLACK FINISH,COMPATIBLE WITH GM LS1,LS2 & LS6 GEN III & IV ENGINES

...ed Hi-Ram 105mm plenum top to be fitted to a low-profile base intake manifold. The short runner, low-profile base intake manifold intended for forced induction applications was conceived to package with an air to water plenum mounted intercooler with a shorter overall height than possible with other existing intake manifolds..
The Holley LS1/2/6 Lo-Ram intake manifold kits are designed for GM LS Gen III & IV engines equipped with GM LS1/2/6 (cathedral port) cylinder heads. These intake manifolds will work with OE or aftermarket cylinder heads. The fuel rail kits come with 2 sets of brackets: A set for long (usually standard length) fuel injectors & set for short (such as Pico, or LS7) fuel injectors..
NOTE: Total Height: Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top - 9.07" (without intercooler installed) | Top-Feed Plenum Configuration w/105mm Long. Mount EFI Plenum Top, w/ intercooler installed - 9.07" + intercooler thickness.
Specs: Brand: Holley EFI | Color: Black | Construction: Cast | Emission Code: 3 | Engine: GM LS1/LS2/LS6 | Finish: Black | Flange Style: EFI | Front Height: 9.07" without Intercooler | Fuel | System Type: EFI | Manifold Type: Lo-Ram | Product Type: Manifold.

Check Stock

A-Premium Upper Intake Manifold with Gaskets Compatible with Ford Crown Victoria 96-00, Mustang 96-98, Thunderbird 96-97 & Lincoln Town Car 96-00 & Mercury Grand Marquis 96-00, Cougar 96-97, 4.6L V8

[Vehicle Fitment-1 ]: Compatible with Ford Crown Victoria 1996-2000 V8 4.6L (8th Vin Digit 6, 9, W).
Mustang 1996-1998 V8 4.6L (8th Vin Digit X).
Thunderbird 1996-1997 V8 4.6L (8th Vin Digit W).
[Vehicle Fitment-2]: Compatible with Lincoln Town Car 1996-2000 V8 4.6L (8th Vin Digit W).
Mercury Grand Marquis 1996-2000 V8 4.6L (8th Vin Digit 6, W).
Mercury Cougar 1996-1997 V8 4.6L (8th Vin Digit W).
[Reference Number]: F6SZ 9424-AA, F8AZ 9424-AAA, F8AZ 9424-BAA, F8AZ 9424-BC, F8AZ 9424-CA, F8AZ 9424-CB, 615-178.
[Specifications]: ①Manifold Height (in): 8.0 in ②Material: Plastic.
[Customer Support]: 1 Year Unlimited-mileage Quality Guarantee.
With being sturdy and brand-new, this Upper Intake Manifolds Kits is the ideal replacement. Please get in touch with us at any time if the product has any quality issues, such as damage or isn't appropriate for your automobile..

Check Stock

Edelbrock 2176 Performer Aluminum Intake Manifold

Dual-plane, low-rise intake manifolds with a 180 degree firing order.
Boosts torque from off-idle to 5, 500 RPM.
Delivers improved throttle response over stock intakes.

Check Stock

COMP Cams CL12-234-2 Xtreme Energy 212/218 Hydraulic Flat Cam and Lifter Kit Chevrolet Small Block

Strong torque thru low end and mid-range, good idle..
212/218 Duration at .050". 110 Degree Lobe Separation Angle. 0.447"/0.454" Valve Lift.
CL Kits include a camshaft, a set of lifters, instructions and assembly lubricant..
Excellent performance in street carbureted applications. Quicker opening lobe profiles deliver increased responsiveness and more area under the lift curve..
More vacuum allows an increase in duration for improved performance and assists power brakes. Best performance with aftermarket intake manifolds, headers and lower gear ratios..
Fits Chevrolet GEN 1 Small Blocks including the 262, 265, 267, 283, 302, 305, 307, 327, 350 and 400. Does not fit LT1/LT4, or factory roller Small Blocks built from 1985 and newer..

Check Stock

ICT Billet LS3 Intake Manifold Seal Oring Gasket Set 6.2L LS L99 Rectangle Port Gen IV Compatible with Chevy Camaro (2010-2015) Corvette (2008-2013) Caprice SS G8 551278

Replace Your Leaking or Worn out Intake Manifold Gaskets with These new OE Spec Intake Manifold Gaskets.
Manufactured with High Quality Silicon to Ensure an Air Tight Seal.
Molded to Factory Dimensions for a Perfect fit.
Compatible with 2008 and up LS3 Rectangle Port Intake Manifolds.

Check Stock

SNIPER 870021 MAP Sensor 2.5-Bar EFI Fabricated Intake Manifolds

Perfect Match - The Lexar + Big Mouth Billet Throttle Body Kit is the best induction choice for GM 4. 8, 5. 3, 5. 7, 6. 0, 6. 2 LS engines with LS1/LS2/LS6 cathedral port heads. Improves throttle response, torque and airflow..
Untouched Performance for GM LS - The FAST Lexar is the standard in airflow, torque and horsepower production. Interchangeable intake runners allow for tuning of power band..
The Quality Option - If you want to make power with your LS, avoid sheet metal intakes. Cheap aluminum manifolds trap heat and decrease efficiency. The Lexar uses advanced polymer materials to cool intake temps for increase airflow and engine efficiency..
Pop the Hood - The FAST Lexar Intake and Big Mouth Throttle Body are an excellent upgrade not just for performance but also look great. The Lexar features a sleek black finish, FAST logo with an option to add billet fuel rails. The Big Mouth Throttle Body features a slick natural billet aluminum finish..

Check Stock

Dokili High Rise Single Plane Intake Manifold for Small Block SBC Vortec 350

【Fitment】Dokili aluminum intake manifold for small block engines using the 1996 and later Vortec (Gen 1+) cylinder heads..
【Features】Dokili intake manifold comes with 360° single plane and high rise designs, providing excellent high RPM power, from 3,000 to 7,500 RPM. It features four corner water ports, a tapped fifth port in the front face, nitrous bosses and dual distributor holddowns..
【Premium Material】Built with natural finish aluminum of superb quality and fit. Permanent mold casting. Angles and straightness comparable to factory manifolds. The port size on this manifold is 2.06" x 1.18". Manifold Height is 6.06"..
【Superior Design】Cast-in bosses on intake runners can be drilled and tapped for use with nitrous. Dual distributor hold-down provisions for extra protection against distributor rotation. Ideal port position allows custom porting for maximum power..
【Package Include】1X SBC Intake manifold. Professional installation in highly recommended..

Check Stock

FAST LSXr 102mm LS1/2/6 Intake Manifold + 102mm Big Mouth Billet Throttle Body Kit

Perfect Match - The Lexar + Big Mouth Billet Throttle Body Kit is the best induction choice for GM 4. 8, 5. 3, 5. 7, 6. 0, 6. 2 LS engines with....
Untouched Performance for GM LS - The FAST Lexar is the standard in airflow, torque and horsepower production. Interchangeable intake runners allow....
The Quality Option - If you want to make power with your LS, avoid sheet metal intakes. Cheap aluminum manifolds trap heat and decrease efficiency.....
Pop the Hood - The FAST Lexar Intake and Big Mouth Throttle Body are an excellent upgrade not just for performance but also look great. The Lexar....

Check Stock

Dokili Aluminum Satin Intake Manifold for Small Block SBC 305 327 350 400 1957-1986

【Fitment】Dokili aluminum intake manifold for Small Block 1957-86 SBC Ch.e.v.y..
【Feature】Dokili intake manifold comes with dual-plane designs, providing power over a wide RPM range, from 1,500 to 6,500 RPM. The size of the port holes: 1.23" x 1.99". Bolt Hole Pattern: 5.160" x 5.625"..
【Dual plane】Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds..
【Note】This intake manifold Will not fit under Corvette hood. Professional installation in highly recommended..

Check Stock

Dokili Aluminum Intake Manifold Small Block Air Gap for SBC Vortec 350 1996-up

【Fitment】Dokili aluminum intake manifold is compatible with 96+ Vortec engines..
【Features】Dokili intake manifold comes with 180° high rise and dual-plane designs, providing excellent high RPM power, from 1,500 to 6,500 rpm. It features four corner water outlets, dual distributor hold down provisions, accepting late model water neck, A/C, alternator and HEI brackets..
【Premium Material】Built with natural finish aluminum of superb quality and fit. Angles and straightness comparable to factory manifolds. Port size measures 2.06" x 1.18" and intake measures 4.65" tall..
【Dual Plane】The intake is square bore style and works with all 4150 Holley style carburetors. Dual plane designs have two smaller plenums that receive air from the carburetor or throttle body, which results in a higher velocity through the booster making the engine more responsive to the driver..
【Air Gap】The air gap design allows air to flow under the plenum to prevent heat transfer from the engine resulting in more horsepower..

Check Stock