Top 2 Way Valve Reviews

Swimables Valve Insert Replacement for All Jandy 2 Way and 3 Way Valves - Neverlube Diverter Valve Kit 4720 Replacement for Zodiac 2 Port or 3 Port

Perfect Fit: Fits all Jandy NeverLube 2 and 3 Port Valves and Jandy Gray 2 and 3 Port Valves. Perfectly fits Zodiac Never Lube Valves.
Installation: Make sure that the pump is turned off. Remove the 8 screws on top of the new valve and lift out the Diverter Valve Assembly..
Installation: Replace the Diverter Valve Assembly into the Valve and tighten it down with the 8 screws. Make sure the Valve Assembly is inserted the same way as it was with the "INLET" label positioned on the middle port where the water comes in. If you insert the Valve any other way, you run the risk of shutting off all water to this valve..
Kit Includes: This kit includes (1) diverter valve assembly, (2) Shaft Orings, (1) Cap Oring and (1) Valve Knob. Excellent Aftermarket Replacement.
100% Satisfaction Guarenteed: Buy with confidence, as our premium quality diverter valve insert is built to last, and if you're not satisfied with it at any time within 30 days of purchase, we'll provide a refund or replacement..

Check Stock

R0487200/ 4733/3500 Diverter 2 or 3 Way Valve Handle Include 4603/R0486900 Knob Kit Replacement - for Jandy Zodiac Never Lube Valve Handles1301+ Black (2 Pack)

Valve Handle : Compatible with Jandy/ ZodiacNever lube valve black handles R0487200, 7433, and gray valve handle 1301+.
R0487200 Valve Handle Fits model : 1154, 1157, 2875, 2876, 3344, 4715, 4716, 4717, 4724,4945, valves.
Valve Handle & knob Replacement : Fits black and gray Valve Handle is compatible with Jandy/ Zodiac 2 way and 3 way diverter valves.If the handle is broken, there is no need to change the whole valve. All that needs to be changed is the handle..
Easy to Install : In order to change the handle, first take off the knob. Ones the knob is off, lift the handle and change it. There is no need to put any lube or teflon on the threads..

Check Stock

HUZTL Fuel Shut Off Valve Two-Way Replaces for 1-633347 Hustler 745059 Scag 482212 E633347 Zero Turn Lawn Mower ZTR Garden Tractor

✅ Two Way cut off valve replaces for EXMARK 1-633347, HUSTLER 745059, SCAG 482-212.
✅ 1/4" fuel shut off valve for Yazoo 102679 Rotary 11273 ZTR Mowers.
✅ Dual tank switching valve replaces for Husqvarna Electrolux Jonsered 539102679 ZTR.
✅ Gas Fuel Shut Off Valve 1/4" Barb Fittings, Two-Way, Dual Tank Configuration, On-OFF-On.
✅ Package include: 1 shut off Valve,2 Fuel Filter, 4 Hose Clamps, 2 Fuel Tank Bushing Grommet.

Check Stock

KOHLER T72770-3M-CP Artifacts Transfer valve trim with prong handle, Less Valve, Polished Chrome

Patented K-joint installation ensures consistent trim appearance regardless of variability in valve rough-in (included with trim).
requires K-728-K MasterShower 2- or 3-way transfer valve or K-737-K MasterShower 2- or 3-way diverter valve (sold separately).
Coordinates with other products in the Artifacts collection.

Check Stock

3/4\ Brass Electric Solenoid Valve, 110V Air Valve Normally Colsed for Water Air Gas Fuel Oil 2W-200-20

High quality 3/4inch Brass Electric Solenoid Valve： Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. .
Normally closed electric solenoid valve: 2 way solenoid valve,Model: 2W-200-20.
3/4" NPT port, Working temperature range: -5 ℃~80 ℃.
Operating Pressure: MIN.0kg/cm - MAX.10kg/com .
This solenoid valve 110v was manufactured with a VITON seal,two-way inlet and outlet ports with standard female thread NPT connectionsm and heat and oil resistant Viton gasket. .
Applicable Irrigation Controls (garden, Farm,etc.), Liquid Controls ( Pipeline, Artificial River Etc. and Air Controls ( Lab, Factory, Etc.) -3/4 inch Brass Electric Solenoid Valve Also known as110v solenoid valve,electric solenoid water valve,brass liquid solenoid valve. .
This valve comes with a ONE YEAR WARRANTY. If the valve does become defective within the first year of purchase, We will gladly replace it..

Check Stock

Beduan 3 Way Shut Off Ball Valve, 1/2\ Hose Barb 2 Switch Brass Y Shaped Valve

This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
Package including 1pcs 1/2" male Y valve, 3pcs 1/2" femalex 1/2 barb, 3pcs hose clamps, Teflon Tape..
Barbed edges provide positive connection..
Y shaped 3-way shut off ball valve has 2 switchs which can control 2 channels respectively, and can also close one of them as a 2 way valve, whatever you want..
Can be used in pneumatic system. It is not lead free, so please do not use it on water lines..

Check Stock

NSEN Y Valve, HoseSplitter, 2WayYConnector, with RubberGrip(Green)

...lso able to rotate 360 degrees, allowing you to tug and pull hoses in all directions.It can make your garden life easier..
Correct Size: The size of y hose connector is 3/4" (US standard).
our hose adapter splitter can match any American spigot. The length of the hose y splitter handles is 4cm, easy to remove. The y valve is coated with rubber, it is ideal for for stiff hands or hands with arthritis..
Easy to installOnly rotating the connector when splitter valve connects with your spigot. No Special Tools And Installation Experience, 100% Safe, Two-Way Water Hose Diverter Switch For Valve Water Can Be Adjusted to Save Water..
Easy to turn on and off: The hose y splitter with heavy duty metal body, comfortable and smooth rubberized grip,easy to turn on and off..

Check Stock

Inflatable Boat Air Valve,2PCS Inflatable Boat Spiral Air Plugs One-Way Inflation Replacement Screw for Inflatable Boat

【High Quality】 The inflatable marine valve is made of high-quality, high-density ABS plastic, which is strong, corrosion-resistant and durable. Please allow a slight deviation for measurement. It is not a general-purpose type. Please check your required size..
【One-way Inflation】This valve is a one-way inflation valve, suitable for rapid inflation..
【Anti-leakage Design】The marine valve has a perfect design, and the valve cover ensures air leakage..
【Fine Design】The fine design of durable air valve with a valve cap ensures anti-leak inflation.The diameter/length of Threaded part is 20mm / 16mm .Please check size to make sure whether your valve bung fit this plug before purchase..
【Good Component】Inflatable Boat Valve comes in pair, the Inflatable Tube is a good replacement accessory for your inflatable boat.After inflation of your inflatable product by the valve, DO NOT use the product immediately! Leave your inflatable product inflated for 2 hours at least, to test if there is any tiny air leakage. especially for inflatable boats..
【Widely Application】Our inflatable boat air valve replacement spiral air plugs fits most inflatable boat, raft, rubber dinghy, etc.But not suit for netted ship .Putting an alternate inflatable boat valv....

Check Stock

Solid Brass Shower Arm 3-Way Diverter Valve for Hand Shower and Fixed Spray Head, G1/2’’ Shower Arm T adapter Bathroom Universal Shower System Replacement Part, Polished Chrome

1.【3 Way Shower Diverter Valve】Hibbent Shower arm diverter is 3-way valve or T adapter. It is attached to shower arm, convert water from handheld shower to fixed shower head conveniently..
2. 【Chrome Finished & Made of Solid Brass】3-Way Diverter is multi-layer chrome finished, build to resist daily corrosion. It can serve many years without leakage..
3.【G1/2 Compatible Size】Fits well with standard shower head and hose. One 1/2 IPS female water inlet, Two 1/2 NPT male water outlet..
4.【Great Diverter for handheld shower and Fixed Shower Head】Attach this two-way diverter valve to shower arm, then you can switch water flow easily between hand shower and fixed shower head..
5. 【Easy to Install and Operate】Easy to install in few minutes without professional plumbing help. Long lever handle is easily operated even with wet and slippery hand. Divert from handheld shower head to fixed shower head easily..

Check Stock

ZHSMS Valve Stem Removal Tool - 20Pcs Valve Cores, 10Pcs Tire Valve Caps, 4-Way Valve Tool, Valve Core Remover Tool

What You Get - 3 x valve core remover, 1 x 4-way valve tool,10 x valve stem caps ,20 x valve cores..
Easy to Use - For quick removal or installation of tire valves. It is often necessary to wring out the valve core when aerated or deflate the tire, then you need the tire valve removal tool..
Portable & 4 Functions - The valve stem tool is easy to use and portable without occupying any space. The single and double head valve stem tools easy to remove and install. In addition to this, the 4-way valve tool also has the functions of pulling the valve stem, deflating the tire, and cleaning the threads. You can choose a stem tool operation according to any..
Wide Application - Our single and double valve stem tools are suitable for a variety of standard valve cores, including cars, trucks, motorcycles, etc. 4-way tire valve stem tool suitable Schrader valve. You can use this valve stem tool to cope with the sudden situation of many car tires..
Essential Tool - It's always a good idea to keep some spare valve cores and valve tool handy, ZHSMS valve core toolset is your best choice.We 'll provide 360 days no excuse return, if you have questions about this valve stem tool, please contact us, our services make customers 100% satisfied..

Check Stock

American Standard TU662223.002 Commercial Shower System Trim Kit, Chrome

For Flash shower rough-in valves with choice of connections (sold separately).
2-way rough diverter valve (R422 - sold separately).
Includes 3-function hand shower with pause feature.
Pause Feature: Non-positive shut-off button on handle reduces flow to a trickle to meet ADA requirement.

Check Stock

Alomejor Inflatable Boat Air Valve Screw 2pcs Valve Air Valve Replacement for Inflatable Boat Jilong Fishing Boat Airbed Raft

?ONE-WAY INFLATION VALVE?The inflatable boat air valve is a one-way inflation valve, good for quick inflation. It is sturdy, anti-corrosion and durable..
?INSURES ANTI-LEAK INFLATION?Inflatable boat air valve screw adopts the fine design with a valvecover ensures anti-leak inflation..
?EASY TO FIT?The boat air plug is good replacement accessory for your inflatable boat. Easy to fit, good performance and long serve life..
?WIDE APPLICATION?Air valve replacement is applicable for inflatable boats, kayak, airbed, canoe, pool raft, rubber dinghy, etc..
?STURDY, ANTI-CORROSION?This air valvecover screw is sturdy, anti-corrosion and durable. Sturdy, anti-corrosion and durable..

Check Stock

ATIE Neverlube Valve Cover & Shaft O-Rings Replacement Fits for Jandy/Pentair Compool 2-Way/3-Way Valves Parts Numbers R0487100 1132 192039Z 51016200Z O-158 O-515-KIT-9 5 Pack

Compatible with Jandy NeverLube and Pentair Valves (1-1/2” to 2-1/2”, 2-way or 3-way).
Jandy & Pentair Compool Valve O-ring Kit (51016200, 192039, 1132 , R0487100).
Fits: Jandy Standard Valve- 4724, 4716, 4715, 4717, 1157, 2876, 1154, 2875 , Pentair valves: 263028, 263029, 263037, 263038.
Repair your leaking seals in your valves instead of the costly repair of removing and replacing the entire valve..
Kit Includes: 5 Cover O-rings & 10 Shaft O-rings.

Check Stock