Top 2 Ton Hydraulic Jack Reviews

Omega Pro Hydraulic Long Ram Jack - 4 Ton Capacity with Flat Base for Auto Garage Shop, Green (OP400S)

  • 4 TON LONG LASTING - Omega Pro OP400S Long Ram Jack features 4 Ton lifting capacity and fabricated from hard-cast steel with heat-treated critical stress areas for long lasting..
  • VERSITILE – Omega Pro Long Jack has the heat-treated chrome cylinder for added strength and give you the ability to Lift from 19 7/8" to 35 1/4" to allow you to use for almost anything needing to be raised..
  • DURABLE PERFORMANCE - Hydraulic system is protected from internal damage by a patented by-pass mechanism. Machined and polished cylinders with die-cut threads provide non-abrasive leak-free, durable performance..
  • EASY TO USE – Handle includes a rubber grip & jack uses a large hydraulic release handle. Perfect for lifting (not supporting) auto engines, trailers, RV, patios, decks, ATVs and more..
  • WARRANTY - 4 ton long jack features a wide rugged base (5-18" x 4 1/2") to allow you with the ability to easily position and provide the stability and strength. It covers with 1 year manufacture warranty from the date of the purchase..
Check Stock

Electric Car Jack TYAYT Electric Hydraulic Car Jack 5Ton(11023lbs) with Tire Inflator Pump and Electric Wrench, Car Floor Jack Electric Jack Lift for Car SUV Sedan Change Tires Garage

  • [ 5 IN 1 Electric Hydraulic Jack ] : The 5 in 1 electric hydraulic jack kit includes electric hydraulic jack,impact wrench，air pump,warning light and major LED light,which meets all your tire replacement needs in one time.The jack is easy to lift 5 ton car,about 2 min reach max height(lifting height range:6.1~17.7 inch).
  • [ Higher Stability and Safety ] : Heavy duty steel pressure rod, features stronger bearing capacity. Permanently lubricated DC motor can provide enough power. It will automatically stop working when it reaches the height limitation, preset pressure or overload. The self-locking device can prevent the jack from falling and keeps a steady height even with no power, ensure the safety of the car and people.
  • [ Easy Pumping ] : With a tire inflator pump installed in the electric car jack, no need to worry about the tire-broken emergency in the middle of no where. Equipped with tire pressure display, you can monitor the tire pressure while pumping.
  • [ Two-way Power Supply ] : electric hydraulic jack is powered by cigarette lighter power outlet or car battery, and has 11.5 feet power cord, long enough to go through the 4 tires without changing the power source. NOTES : Start car engine before operation. Never use the jack on slop gro....
Check Stock

9TRADING 50 Ton Air/Hydraulic Bottle Jack Super Duty Auto Truck RV Repair Lift with Handle

  • 50 Ton Air / Hydraulic Bottle Jack Super Duty Auto Truck RV Repair Lift w/Handle.
  • This All Purpose Hydraulic Jack Easily Handle Lift Jobs Up To 50 Ton. Can Be Used With Air or Manual. Ideal For Automotive, Heavy Duty Truck Repair, Moving Machinery And Heavy Equipment And A Variety Of. Maintenance Applications.
  • Durable Rugged Steel Construction. Minimum Height: 10-1/2" , Maximum Height: 17".
  • Lifting Height: 6-5/8" , Air Rubber Hose Length: 48" , Air Valve And Inlet: 1/4" X 18NPT.
  • Working Pressure: 120-200PSI , Max Pressure: 220PSI , Comes with 2 Wheels & Handle.
Check Stock

OTC UA22 22-Ton Under Axle Jack with Air Assist

  • OTC's UA22 22-Ton Under Axle Jack features air-assist operation and a self-retracting, spring return with a long, 47-1/4 in. T-handle that lets you easily position the jack under vehicles with long overhangs.
  • One pull of the handle activates the self-retracting, 4-1/2 in. stroke, 22-ton capacity ram, without having to crawl underneath the vehicle, while large rubber-tired steel wheels ensure maneuverability and movement on most types of terrain.
  • 3 inch diameter, round saddle, with center notch and 3 saddle attachments - 3/4 in. for 17-3/4 in. lift, 1-15/16 in. for 18-15/16 in. lift, and 3-7/8 in. for 20-2/3 in. lift, allowing height adjustments based on vehicle being lifted.
  • Welded hydraulic pump and cylinder construction provides increased strength and leak prevention.
  • Chrome plated ram offers additional rust resistance.
  • Wiper seals protect hydraulic system from contaminants.
  • Specifications: 22-ton capacity, 4-1/2 in. cylinder stroke, 4-1/4 in. extended screw length, 90-145 PSI, 8.27 in. to 20-2/3 in lifting range using longest saddle, 69.87 in. reach, 8.27 in. frame height, 11.73 in. x 22.63 in. footprint, 100 lb. weight.
Check Stock

Electric Car Jack TYAYT 5 Ton Hydraulic Car Jack with Tire Imflator Pump for Tire Change 12V Electric Car Floor Jack with LED Light for SUV and Sedan (Red)

  • 4 IN 1 ELECTRIC HYDRAULIC JACK:The 4 in 1 electric hydraulic jack kit includes electric hydraulic jack,air pump,warning light and major LED light,which meets all your tire replacement needs in one time.The jack is easy to lift 5 ton car,about 1 min reach max height(lifting height range:6.1~17.7 inch).
  • [ Higher Stability and Safety ] : Heavy duty steel pressure rod, features stronger bearing capacity. Permanently lubricated DC motor can provide enough power. It will automatically stop working when it reaches the height limitation, preset pressure or overload. The self-locking device can prevent the jack from falling and keeps a steady height even with no power, ensure the safety of the car and people.
  • [ Easy Pumping ] : With a tire inflator pump installed in the electric car jack, no need to worry about the tire-broken emergency in the middle of no where. Equipped with tire pressure display, you can monitor the tire pressure while pumping.
  • [ Two-way Power Supply ] : electric hydraulic jack is powered by cigarette lighter power outlet or car battery, and has 11.5 feet power cord, long enough to go through the 4 tire....
Check Stock

SPECSTAR Under Hoist Support Stand 3/4 Ton 1500Lbs Capacity Jack Stand Lifting from 1.3 to 2 Meters with 12 Inch Diameter Steel Base

  • Pro-Lift Floor Jack 2 Ton features 4,000 lbs maximum capacity and is constructed with heavy-duty steel for strength and durability. It gives you the ability to lift from 3-5/8 inches to 13-3/8 inches..
  • A hydraulic trolley floor jack is constructed with heavy-duty steel. It features the front wheels with the rear casters for maneuverability. The large swivel saddle provides you with easy jack positioning and user safety..
  • This low-profile jack for the car features an overload valve bypass system to prevent jack damage and user injury. F-757G car jack low profile features the compact design with the carrier handles to easily transport from one location to another..
  • The patented built-in by-pass device protects the hydraulic system from over-pumping damage. Before using the jack, insert provided handle into the handle sleeve, then pump 6 to 8 full strokes. This will help release any pressurized air which may be trapped within the reservoir.
  • This 2 Ton low-profile jack is ideal for auto repair services in your home garage. In addition, it is covered with a 1-Year warranty from the date of the purchase..
Check Stock

Dulytek DHP7 Hydraulic Heat Press Machine 7 Ton Pressing Force Dual Heat 6 Plates Precise Two-Channel Control Panel - [Starter Kit Included]

  • 14000 psi Ram Hydraulic Jack Ensures Successful Pressing at Relatively Low....
  • Leak-Free Removable Hydraulic Bottle Jack for Easy Replacement.
  • Reinforced Jack Handle to Add Strength and Durability.
  • Upgraded Body Frame to Hold Up To 12-Ton Force.
  • Ergonomic Handle Design Allows You to Move the Press Conveniently.
Check Stock

VEVOR Hydraulic Long Ram Jack, 4 Tons/8818 lbs Capacity, with Single Piston Pump and Flat Base, Manual Cherry Picker w/Handle, for Garage/Shop Cranes, Engine Lift Hoist, Red

  • Handles up to 4-Ton/8818 lbs: This 4-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications..
  • 24" -43.7" Lifting Range: Minimum height: 24 in/61 cm. Maximum height: 43.7 in/111 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 4 ton/8818 lb. in weight. And the slow release function for reliability and security..
  • Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift..
  • Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. The flat base allows the jack mounts directly onto most shop cranes. And the glide-action pressure pump is designed to lift with minimal muscle and effort..
  • Sturdy Steel Construction: Durable frame is constructed of high-grade steel and bu....
Check Stock

VEVOR Hydraulic Long Ram Jack, 3 Tons/6600 lbs Capacity, with Single Piston Pump and Clevis Base, Manual Cherry Picker w/Handle, for Garage/Shop Cranes, Engine Lift Hoist, Black

  • Handles up to 3-Ton/6600 lbs: This 3-Ton capacity long ram hydraulic jack helps you convert your existing hoist to a convenient and fast one. A quick way to raise loads without the backache. A must-have for hydraulic cranes, engine hoists, and a wide variety of applications..
  • 26" -45.7" Lifting Range: Minimum height: 26 in/66 cm. Maximum height: 45.7 in/116 cm. The long ram hydraulic round bottom jack provides an ample 19.7 in/50 cm stroke for the optimal lift of objects up to 3 ton/6600 lb. in weight. And the slow release function for reliability and security..
  • Reliable & Durable Jack: Large diameter hydraulic steel cylinder unit results in lower oil pressure needed to move the load, which helps to reduce wear and extend service life. The piston-ram is treated and polished to resist skiving and utilizes a Y-Style polyurethane sealing ring with a backup ring, preventing the load from falling slowly or bypassing oil drift..
  • Labor-saving Long Ram: Long ram jack features a convenient handle with a rubberized comfort grip. Clevis style base allows the jack mounts directly onto most shop cranes. And the glide-action pressure pump is designed to lift with minimal muscle and effort..
  • Sturdy Steel Construction: Durable frame is constructed of high-grade steel an....
Check Stock

TCE AT82001U Torin Hydraulic Trolley Service/Floor Jack Combo with 2 Jack Stands 2 Ton 4,000 lb Capacity Blue

  • Hydraulic trolley service/floor jack combo includes (1) floor jack and (2) jack stands, providing you with the essentials to lift and support most....
  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8".
  • Equipped with a safety bypass system prevents over-loading and ensures safe operation.
  • built-in carrying handle allows the floor jack to be lifted....
  • Jack stands feature an adjustable height that ranges from 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity.
  • Each jack stand has a large saddle surface area for better contact with the load being supported.
  • A wide pyramid foot base provides added strength and....
Check Stock

BIG RED Torin Hydraulic Trolley Floor Jack Combo with 2 Jack Stands, 2 Ton Capacity (T82001)

  • Hydraulic trolley service/floor jack combo includes (1) floor jack and (2) jack stands, providing you with the essentials to lift and support most cars.
  • Constructed with heavy duty steel, providing long term durability.
  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8".
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Equipped with a safety bypass system prevents over-loading and ensures safe operation.
  • built-in carrying handle allows the floor jack to be lifted quickly for ultimate portability.
  • Jack stands feature an adjustable height that ranges from 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity.
  • Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place.
Check Stock

VEVOR Pneumatic Bottle Jack 50T Hydraulic Car Jack Lift Range 27-43cm Air Transmission Jack 110231lbs for Heavy Duty Vehicles

  • 【HIGH LIFT CAPACITY: 50T】- The capacity can reach up to 50 Ton (110231lbs). More than that, hydraulic jack's lift height ranges from 10-1/2" to 17" (27cm-43cm). The highly rugged construction makes you worry nothing..
  • 【DURABLE & RELIABLE 】- The air tube made of high strength material and reinforced seal of the tube can ensure the safety and durability when you are at work..
  • 【AIR HYDRAULIC 2 IN 1 JACK】- Integrating pneumatic jack with hydraulic jack into this one car bottle jack, we found the adaptibility and practicability are beyond your imagination..
  • 【EASY TO TRANSPORT】- With two big wheels and a portable handle, the bottle jack is not a trouble when it comes to movement and and splicing handles also mean that the storage is easy..
  • 【WIDELY USED】- It is an ideal choice for automotive, heavy duty truck repair, moving machinery and heavy equipment and a variety of maintenance applications..
Check Stock

Torin AT82001B Hydraulic Trolley Service/Floor Jack Combo with 2 Jack Stands, 2 Ton (4,000 lb) Capacity, Black

  • Hydraulic trolley service/floor jack combo includes (1) floor jack and (2) jack stands, providing you with the essentials to lift and support most cars.
  • Constructed with heavy duty steel, providing long term durability.
  • Floor jack has a 2 ton (4,000 lb) load capacity and features a minimum lifting height of 5-1/4" and a maximum height of 13-3/8".
  • Equipped with (2) large steel casters and (2) 360-degree swivel casters for smooth maneuverability.
  • Equipped with a safety bypass system prevents over-loading and ensures safe operation.
  • built-in carrying handle allows the floor jack to be lifted quickly for ultimate portability.
  • Jack stands feature an adjustable height that ranges from 10-13/16" to 16-9/16" with a 2 ton (4,000 lb) load capacity.
  • Multi-position ratchet bar has a sawtooth design, allowing for quick height adjustments that lock into place.
Check Stock