Top 2 Table 8 Spindle Reviews

Grizzly G1066Z Drum Sander, 24-Inch

  • Features 1/2 inch, 3/4 inch, 1 inch, 1-1/2 inch and 2 inch sanding drum sizes and one 4 x 24 inch belt.
  • Operate with belt speeds up to 1575 FPM and spindle speeds up to 2000 RPM.
  • The 3.5-amp motor oscillates the belt and spindle 58 times per minute with a 5/8-inch stroke.
  • Onboard storage maintains organization of all accessories and sandpapers.
  • Includes a beveling work table, five throat plates, four rubber sanding drums, one belt sanding attachment and six pieces of 80-grit sandpaper (one for each size spindle/belt).
Check Stock

SHOP FOX M1036 Micro Milling Machine, Small

  • Item may ship in more than one box and may arrive separately.
  • Motor: 0.2 HP, 2A, 110 Volt, single-phase.
  • Table size: 3-1/2-Inch by 8-Inch.Low speed range:0-3600,High speed range: 0-500.
Check Stock

Woodskil 8 Inch Drill Press, 2.3 Amp Variable Speed Bench Drill Press, 5-Speed Bench Top Drilling Machine

  • 8-INCH DRILL PRESS: CSA listed, 120VAC, 2.3 Amp induction motor, 1/2-inch keyed chuck, 8-inch swing, 2-inch spindle stroke.
  • HEAVY DUTY MATERIAL: Unlikes other drill press uses iron work table and base, the work table and base of this Woodskil 8-inch bench dress press are all made of CAST IRON, ensuring steady and accurate drilling experience.
  • BEVERLY WORK TABLE: The heavy-duty cast iron work table can bevel 45 degrees left and right, and the work table is free to adjust the height.
  • MECHANICAL 5-SPEED: Powerful motors provide a high speed, 750, 1100, 1500, 2100, 3200 RPM for different material drilling.
  • PRODUCT WARRANTY: We provide 2 year limited warranty for this 8 inch drill press, if you have any questions about it, please feel free to contact us.
Check Stock

Grizzly Industrial G0529-1 HP Oscillating Spindle / 12" Disc Sander

  • Cast Iron 14-1/2" x 14-1/2" oscillating sander table tilts to 45°.
  • Cast iron 17-3/4" x 10" disc sander table tilts to 45°.
Check Stock

TECHTONGDA Mini Milling Machine MT3 Mill Drill Machine Benchtop Mill/Drill Milling Drilling Machine Brushless Motor Variable Speed with Digital Readout 110V 1100W

  • ⚒️ The Mini Milling Machine with drilling, milling groove, plane milling chamfering and other functions, suitable for all kinds of metal, wood and other materials fine processing, widely used in machinery manufacturing,woodworking DIY and so on..
  • ⚒️ Machine head tilt, Spindle incline Angle: ±90°(The nose can actually rotate 360 degrees), Spindle taper: MT3, Max. drilling diameter: 0.9"(25mm), Distance from spindle to table: 13.8"(350mm), Spindle stroke: 2"(52mm), Table size: 27.5"*7.1"(700mm*180mm).
  • ⚒️ 1100W Strong Power. The Benchtop Mill/Drill Machine with 1100W brushless motor, Infinitely Variable-Speed, The Range of spindle speeds: 50-2250rpm.
  • ⚒️ Spindle high precision feed, one piece steel handle bar, hand wheel adjustment with fine adjustment switch, high precision machining, accurate to 0.01MM..
  • ⚒️ Widened working table: 27.5"*7.1"(700mm*180mm), artificial fine grinding, integrated casting, T-slot convenient fixture fixation. High quality and Durable..
Check Stock

WEN 33075T 11-Amp Variable Speed 16-Inch Benchtop Milling Machine with Digital Readout and Extra-Large Mill Table

  • Variable speed operation ranges from 100 to 2000 RPM while the LED monitor displays the current spindle speed.
  • Spacious 27.6 by 6.3-inch work table combined with the 14.5-inch max distance between spindle and table provides ample room for larger workpieces.
  • Table travels 19.75 inches along the X-axis and 6.5 inches along the Y-axis while the headstock travels 9.75 inches along the Z-axis.
  • Digital Z-axis DRO depth gauge showcases exact spindle travel for maximum precision.
  • Includes an R8 spindle taper, a 2.75-inch spindle travel, a pre-installed drill chuck (1/32 to 3/4 inch), fine-tune adjustment hand wheels, a transparent chuck guard, an emergency stop button, onboard measurement indicators, a 15-inch swing, two M10-1.5 T-nuts, 12mm T-slots, and a two-year warranty.
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock

Grizzly Industrial G0709-14 x 40 Gunsmithing Gearhead Lathe

  • 2 MT#3 dead centers (1 carbide tipped) 1 MT#3 live center 1 MT#5 - MT#3 sleeve 1/2" drill chuck w/ MT#3 arbor.
  • Dimensions 51-3/4"H, 71-3/4"L, 30"W Approximate shipping weight 1550lbs 11" face plate.
  • Motor 2 HP, 110/220V, single-phase, 20/10 Amps, 60Hz, 1725RPM Number of speeds 8 Range of speeds 70-2000RPM.
  • Spindle bore 1-9/16" Spindle nose taper MT#5 Spindle nose D1-5 Camlock D1-5 spindle nose (6 pin) 1-9/16" spindle bore.
  • Swing over bed 14" Swing over gap 19-3/4" Swing over cross slide 8-3/4".
Check Stock

Grizzly Industrial G0779-23-3/8 Heavy-Duty Floor Model Gearhead Drill Press

  • 360 degree table positioning around column.
Check Stock

WEN 4214T 12 in Variable Speed Drill Press & DPA2412T 24 in x 12 in Drill Press Table with an Adjustable Fence and Stop Block

  • Features a 5-amp induction motor, a 12-inch swing, and a 3-1/8-inch spindle travel.
  • Adjust the mechanical variable speed anywhere from 580 to 3200 RPM.
  • Digital speed readout displays current RPM of the machine for maximum precision.
  • Includes a Class IIIA 2.5mW laser, overhead light, adjustable depth stop, table roller extension, beveling 9-1/2 by 9-1/2-inch work table, 5/8-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty.
  • Expand your workspace by 275 square inches (23-7/8 inch width, 11-7/8 inch depth).
Check Stock

LiFuJunDong 4 Axis USB CNC6040 Router Engraving Machine 3D Milling Machine w/Controller 110V 1.5KW VFD Water-Cooling Router Engraving Machines for Metal, Wood, Glass and Plastic (6040 1.5KW 4AXIS)

  • ... Aluminium alloy Max. Feeding height: ≤100mm Drive unit: X axis---1605 Ball Screws Y axis---1605 Ball Screws Z axis---1204 Ball Screws Sliding unit: X axis---High intensity Chromeplate shaft Y axis---High intensity Chromeplate shaft Z axis---High intensity Chromeplate shaft Stepping motor: 57 two-phase 3A 150N.cm.
  • SPINDLE MOTOR-1】 Outside dimension: 65*158mm Material: 304 stainless steel, Copper coil, Pressure cast aluminum pipe water jacket VOLTS, current, power: AC110V, 60Hz, 5A, 1.5 KW VFD Spindle motor: 1.5 KW Water Cooled Spindle speed: 24000 rpm Max working frequency: 400Hz Principal axis collet: ER11collet, Standard configuration :6mm Nut Model: ER11-A Cooling: Water-cooling Speed ​​mode: By adjusting the VFD output voltage and operating frequency from 0-24000RPM.
  • SPINDLE MOTOR-2】Lubrication way: lubricated by high grease Repeat accuracy: 0.05mm Spindle precision: radial beat acuities 0.03mm Carving Instructions: G code / TAB files / nc file / NCC files Communication interface: through USB connection with computer Working Speed: 50-1500mm / min (different material with different speed settings) Maximum Idle speed: 0-1500mm/min.
  • HIGHLIGHTS OF WATER COOLING SYSTEM 】It can cool the spindle and protect the machine Avoid the spindle burn o....
Check Stock

WEN 4214T 5-Amp 12-Inch Variable Speed Cast Iron Benchtop Drill Press with Laser and Work Light

  • Features a 5-amp induction motor, a 12-inch swing, and a 3-1/8-inch spindle travel.
  • Adjust the mechanical variable speed anywhere from 580 to 3200 RPM.
  • Digital speed readout displays current RPM of the machine for maximum precision.
  • Includes a Class IIIA 2.5mW laser, overhead light, adjustable depth stop, table roller extension, beveling 9-1/2 by 9-1/2-inch work table, 5/8-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty.
  • Measures in at 16.8 by 13.5 by 36.6 inches in size with a weight of 85 pounds.
Check Stock

WEN 4212T 5-Amp 10-Inch Variable Speed Benchtop Drill Press with Laser & DPA2513 24-by-12-Inch Drill Press Table with an Adjustable Fence and Stop Block

  • Product 1: Features a 5-amp induction motor, a 10-inch swing, and a 2-inch spindle travel.
  • Product 1: Adjust the mechanical variable speed anywhere from 530 to 3100 RPM.
  • Product 1: Digital speed readout displays current RPM of the machine for maximum precision.
  • Product 1: Includes a laser, adjustable depth stop, beveling 8 by 7.5-inch work table, 1/2-inch capacity keyed chuck, a chuck key with onboard storage, and a two-year warranty.
  • Product 2: Expand your drill press workspace.
  • compatible with the entire WEN Drill Press series.
  • Product 2: Spacious table measures in at 23-7/8 x 11-7/8 x 1 inches.
  • Product 2: Unique design provides clearance for the drill press’ table height adjustment crank.
  • Product 2: Adjustable fence and stop block paired with the onboard rulers allow for precise and uniform drilling.
Check Stock