Top 2 Cylinder Reviews

EWK Spark Plug Boot & Wire Removal Tool, Ignition Coil Puller for VW Audi T10112

  • 【 Work Smart 】 This spark plug boot removal Tool T10112 is a special tool for quickly remove the spark plug lead without destroying any component..
  • 【 Time Saver 】 The angled shaft fits well into narrow plug cavity with no manifold dismantling needed, reach the plugs on cylinder #2 and #3 smoothly..
  • 【 High Quality 】 Shaft and boot end are constructed from premium stainless steel for maximum strength and longevity. The ergonomically grip convenient to use..
  • 【 Applications 】 Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD). *Not recommended for non-VW/Audi plug leads..
  • 【 Excellent WorKing Experience】Durable products with 12+6 months warranty, reply within 24 hours, ship out within 24 hours to achieve fast delivery. Contact us if you need further assistance..
Check Stock

Runleader Digital Hour Meter Tachometer, Maintenance Reminder, Battery Replaceable, Automatically Shutdown, Use for ZTR Lawn Mower Tractor Generator Marine Snowmobile.

  • HOUR METER---- Accumulate total running hours TOT with 0.1/1 hour accuracy.
  • MAINTENANCE REMINDER----Countdown tracking service reminder time SVC.
  • Service warning icon flashes to remind when the maintenance time arrives.
  • TACHOMETER----Messuring and display RPMs (0-20000RPM) when the engine is running.
  • Suit for: 4 storke 4 cylinder / 2 storke 2 cylinder / 4 storke 2 cylinder/ 2 storke 1 cylinder / 4 storke 1 cylinder.
  • BATTERY REPLACEABLE---- Replaceable battery CR2450,data retained after battery change.
Check Stock

SAMDO Universal Motorcycle Speedometer Odometer Tachometer RPM Speedometer Gauge 199 Kph Mph for Carburetor Motor

  • 1--SAMDO Universal Speedometer Gauge fits for all carburetor motorcycles with DC 12V, SAMDO Motorcycle Tachometer adjustable for 8-22 inch wheel.
  • 2--ALL-IN-ONE Function: Universal Speedometer, Odometer, Tachometer, Fuel Level Display, Left and Right Indicator, N Gear, Battery, Water Temperature Indicator..
  • 3--SAMDO Digital speedometer Fits for all style motorcycle ,1 cylinder, 2 cylinder and 4 cylinder( 4 stroke motorcycle disc-brake front tire ).
  • 4--SAMDO SPEEDOMETER Shift Speed display in Kilometers or Miles, For Single cylinder and 2 cylinder motors, RPM cable connects trigger signal line positive pole . For 4 cylinder motors, RPM cable connects ignition coil input Line ..
  • 5-- Particular Attention-- SAMDO Motorcycle Gauges RPM does not compatible with Electric fule Injection (EFI) engine, if your motorbike is Electric fule Injection (EFI) engine, RPM function would not work properly, other functions run well.
Check Stock

NICHE 660cc Big Bore 9.1:1 Compression Cylinder Kit for 2001-2008 Yamaha Grizzly and Rhino 660

  • Fits 2002-2008 Yamaha Grizzly 660, Fits 2004-2007 Yamaha Rhino 660.
  • Replaces OEM: 5KM-11310-00-00, 2C6-11631-00-X0, 3YF-11631-00-X0, 2C6-11603-10-00, 3YF-11633-01-00, 93450-24028-00.
  • Also replaces OEM: 93211-01467-00, 5KM-11351-00-00, 3YF-11351-00-00, 3YF-11181-00-00, 90105-10649-00, 90105-10650-00, 90105-09648-00, 90201-102G9-00, DPR-8EA90-00-00.
  • Includes: (1) Cylinder, (1) Cylinder Head with built in spark plug, (4) Cylinder Stud Washers, (2) Short Cylinder Studs, (2) Long Cylinder Studs, (1) Head Gasket, (1) Base Gasket, (1) O-Ring, (1).
  • Cylinder Bore and Stroke of 100.0mm x 84.00mm.
Check Stock

1- Black Cigar Ashtray Ash2Cigar-1

  • What you will get: you will receive 2 black car cylinder with lid, sufficient quantity to meet your daily needs.
  • Good quality: auto cylinder for car is constructed out of quality material to provide you with a sturdy and durable tray, fits most car cup holder.
  • Cool blue light design: cool blue light will be lighten when open, when you lift the lid, the car cylinder cool blue LED light up.
  • Convenient to install: you only need to fix the car cylinder with 2 fixing clips, it can remain stable when driving, car cylinder help remove odors....
  • Versatile application: the portable cylinder is ideal for office, home and car use.
  • It is also can be a mini trash can and easy to carry with compact....
Check Stock

CDHPOWER Super Motor PK80 Replaement with Iron Sleeve Cylinder 49mm Top End Cylinder Set and Bottom End Crank Set for 2 Stroke kit 66cc/80cc

  • CDHPOWER Super pk80 motor Replaement:Iron Sleeve Cylinder 49mm:Top End Cylinder Set and Bottom End Crank Set for 2 stroke kit 66cc/80cc pk80 motor kit.
  • High hole Piston kit installed well inside of cylinder and Long connecting rod AF80 or zmn80.
  • The casting cylinder head increases the horse power and this greatly cools off the engine. Would result better performance and longer life for your 2 Stroke Bicycle Engine. Casting cylinder head Height Max:51mm-52mm.
  • Clear up the cylinder transfer ports before assembling maybe some rough slag inside which maybe break off and cause the jamming of pistons and cylinders.
  • fully attention on screwing cylinder to the end bottom,DO NOT screw M8 bolts tightly that maybe cause drill through the end bottom so add some gasket or washer on head is better way to prevent it happen.
  • Attention on piston ring if put the piston out of cylinder, the piston rings are weak, better with right way install piston kit to cylinder.
Check Stock

MySit Gas Lift Cylinder Removal Tools 28mm/1.1-Inch, Removal Tools Sets for Replace Office Chair Cylinder, Fix Sinking Office Chair Stainless Steel Chair Saver for Stop Sinking - 2 Pieces

  • DURABLE CHAIR CYLINDER REMOVAL TOOLS KIT -- Mysit adjustable office chair cylinder removal tools are made of durable stainless steel. Package inludes 2pcs stainless steel cylinder clamp shafts, 2pcs long bolts, 1pc L wrench..
  • REPLACE GAS LIFT CYLINDER USE -- No other tools required, using this tool set to remove/replace many years sinking gas cylinder, let disassemble easily to save your strength and time..
  • NOTICE FOR CYLINDER REPLACEMENT: 1.Install the top ring collars on cylinder(using short screws), make sure this ring CAN slide along the cylinder.
  • 2.Install the below ring collars on cylinder(using short screws), make sure this below ring tightly enough and CANNOT slide.
  • 3.Install and tighten 2 long screws on below ring ALTERNATELY, to avoid the below rings tilt and cannot disassembly..
  • UNIVERSAL SIZE 28MM -- Office chair stainless steel removal tool kit fits for most office chairs (stools, executive chairs, office chairs, gaming chairs) with a cylinder within 1.1"(28mm) diameter..
  • FIX SINKING OFFICE CHAIR USE -- Universal size fits all height adjusting cylinder chairs, office chair saver for stop sinking can control the height of the seat, prevent repeated sinking, the office chair replacement parts can hold weight up to 600 pounds. It takes few minu....
Check Stock

ProVision PV2 Flexible Fiberscope / Inspection Scope w/ 36 In Non-Obedient Cable

  • 【Scope of application】Cylinder honing tools are suitable for degreasing engine cylinders with diameters from 3/4 in to 2‑1 / 2 in and 1‑1 / 4 in to 3‑1 / 2 in. The manufacturer's part number is 88233.
  • 【Excellent performance】This tool can be used to remove carbon deposits and hot glaze in the cylinder bore. This special tool can be used for small-bore cylinders, such as motorcycles, brakes, and clutch cylinders, ideal for removing rust deposits in old renovations..
  • 【High quality】The cylinder honing three jaws are made of high-quality iron materials, high strength, high hardness, rust and resistance, not easy to wear and not easy to age, and are made of special technology to enhance their stability and performance to ensure excellent durability and long service life ..
  • 【Ergonomics design】The engine cylinder grindstone adopts ergonomics design, which can be comfortably held, effortless to use, easy to operate, labor-saving, and high-efficiency, bringing you a lot of convenience. Flexible shaft, easy to use, and automatic centering. The knurling wheel can adjust the spring pressure of the stone on the cylinder hole..
  • 【Use steps】Spray lubricant on the stone or cylinder hole. Set the whetstone on the drill bit, insert the engine whets....
Check Stock

Wall-Mounted Bracket Single Wall Bracket for Compressed Gas Cylinders Holder (Red)

  • gas tank holder made of ABS plastic，solid construction offers safe & secure use.
  • gas cylinder rack simple design is easy to install, cylinder tank brackets suitable for hospital/laboratory/factory etc.
  • cylinder strap secures cylinder to bracket，prevent cylinders from falling or moving.
  • compressed gas tank fixed frame holder suitable for 40L cylinder gas tank.
  • gas cylinder strap long100cm/39.37inch；steel cylinder stand Approximate size.
Check Stock

SAMDO Motorcycle Speedometer 299 Kmh Mph 7 Color 14000RPM Tachometer ATV Quad Frenzy Universal Digital Speedometer

  • 1--SAMDO Universal Speedometer fit for all motorcycles with DC 12V, adjustable for 8-22 inch wheel.
  • 2--ALL-IN-ONE Function: Motorcycle Speedometer, Odometer, Tachometer, Fuel Level Display, Left and Right Indicator, N Gear, Battery, Water Temperature....
  • 3--SAMDO Digital Speedometer Fits for all style motorcycle ,1 cylinder,2 cylinder and 4 cylinder( 4 stroke motorcycle disc-brake front tire ).
  • 4--SAMDO Speedometer Gauge Shift Speed display in Kilometers or Miles,7 color screen backlight.
  • For Single cylinder and 2 cylinder motors, RPM cable....
  • 5--Particular Attention-- SAMDO Motorcycle Tachometer RPM does not compatible with Electric fule Injection (EFI) engine, if your motorbike is Electric....
Check Stock

Ambienceo 26” 28” Black 2 Stroke 50cc 80cc Cycle Bicycle Gas Motorized Gasoline Engine Motor Kit CDI Air Cooling For Mountain and Road Bike 80cc Silver

  • CDHPOWER LD90 Cylinder Body w/Piston Kit.
  • Compatible with bottom end of all brand 2 stroke gas motor kit 66cc/80cc/pk80/LD80/LD90 including other....
  • New pk80 upgraded cylinder with piston kit, the piston kit is installed well inside of cylinder already.Excluding cylinder head..
  • Cylinder head gasket and cylinder body gasket are included.
  • The LD90 Cylinder Body and piston kit can be replacement of most 2-stroke gas motor engine such as pk80/LD80/LD90.
  • piston pin:10mmx39mm.This is a high hole piston for a 40mm stroke but with 48mm bore..
Check Stock

YOTOO 2-Piece Engine Cylinder Hone Set Deglazer Adjustable 1-1/4\ to 3-1/2\ and 3/4\ to 2-1/2\ Diameter with Stones 220 Grit

  • Engine cylinder hone for deglazing engine cylinders 3/4" to 2-1/2" and 1-1/4"-3-1/2" in diameter. 2-Piece Packed.
  • Flexible shaft for easy use and self centering.
  • Knurled wheel adjusts spring pressure of stones against cylinder bore.
  • 1-1/4" to 3-1/2" cylinder hone features 3 replaceable 2-Inch long 220 grit stones. 3/4" to 2-1/2" cylinder hone features 3 replaceable 1-1/8-Inch long 220 grit stones.
  • WARRANTY&SUPPORT: One year warranty. Any problem, please feel free to contact us..
Check Stock

SAMDO Universal Motorcycle Speedometer Tachometer 199 Kmh Mph 12000RPM Super Bright Screen

  • SAMDO Motorcycle Speedometer Universal fits for all size tire, adjustable for 8-22 inch wheel, wheel perimeter setting range: 1000-2999mm.
  • ALL-IN-ONE Function: Speedometer, Odometer, Tachometer, Fuel Level Display, Left and Right Indicator, N Gear, Battery, Water Temperature Indicator..
  • SAMDO Digital Speedometer fits for all style carburetor motorcycle ,1 cylinder,2 cylinder and 4 cylinder( 4 stroke motorcycle disc-brake front tire ).
  • Shift Speed display in Kilometers or Mile freely, For Single cylinder and 2 cylinder motors, RPM cable connects trigger signal line positive pole .....
  • Particular Attention-- SAMDO Digital Motorcycle Tachometer does not compatible with Electric fule Injection (EFI) engine, if your motorbike is....
Check Stock