Top 199ml32front Bumper Reviews

Tioyar Front Bumper + Rear Bumper with Winch Plate & LED Lights & 2 Hitch Receiver Kit for 97-06 Wrangler TJ Textured Black

  • Fitment - Tioyar front & rear bumper combo fits for 1997-2006 Wrangler TJ (including: Freedom, Sports, Rubicon, Shahara)..
  • Front and rear bumper materials: 5/32 inch thick low carbon hard steel and 2 inch x 0.120 inch precision tolerance steel tube, with stronger bumper,....
  • Built-in led light design: beautiful and elegant. The front bumper is equipped with 2x20W LED aluminum lights+2x18W LED aluminum lights. The rear....
  • Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The maximum....
  • Easy to install without drilling or cutting. Follow the instructions to install!.
Check Stock

WOWOONE 30 Types 74HCxx Series Logic IC Assortment Kit, Logic Gates, Integrated Circuits Assortment Kit, TTL, High-Speed Si-Gate CMOS IC, Low-Power

  • Input point X element x0-x7, DC24 input, low level valid. X0-5 is the high-speed counting input port (default: 12K,100KHZ optional)..
  • Output analog voltage WR3A instruction, corresponding to the value 0-4095. Intermediate relay M: M0-M3071, the power loss preservation range can be set..
  • The maximum speed current is 1A. External load common terminating + 24, the other end received the PLC output port Y..
  • Y0-Y5 is optional relay or transistor output, relay output current 5A. The transistor output DC24V, the current maximum 1A..
  • 100Ms timer: t0-t199, accumulative power off save t184-t199.
  • 10Ms timer: T200-T249, accumulative power off saving T246-T249.
  • 1Ms timer: T250-T383, where T250-255 is cumulative.
  • 16-bit counter: C0-C199, power off to save C100-199.
  • 32-bit counter: C200-C219, power off to save C220-C234.
Check Stock

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 2007-2013 for Chevrolet Silverado 1500 Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 2007 2008 2009 2010 2011 2012 2013 for Chevrolet Silverado 1500.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add....
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced....
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware. Parking sensor holes: Front: no.
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with....
Check Stock

Hooke Road Ram 1500 Steel Bumper Front + Rear Full Width Bumper Combo with LED Lights & D-Rings for 2013-2018 Dodge Ram 1500 (Exclude Rebel)

  • FITMENT: Easy bolt -on install front and rear bumper kit fits 2013-2018 Ram 1500(Excluding Rebel) Models Regular Cab | Quad Cab | Crew Cab, Not compatible with OE sensor..
  • FRONT BUMPER: Integrated grille guard hoop provides superior protection. 4×18W LED Spotlights for extra lighting..
  • REAR BUMPER: Rugged styling and protection. Integrated steps for easy access to truck bed. 2×18W LED floodlights for extra lighting. Retains factory receiver hitch..
  • CORROSION RESISTANCE: Heavy duty 9-gauge(5/32 inch) steel construction.Textured black powder coat finish, premium E-coating process for 5-year corrosion protection under normal use..
  • FOR OFFROAD: Front bumper winch plate - rated up to 12,000 pounds. Include front and rear high strength D-ring mounts and D-rings with Isolators..
Check Stock

Hooke Road Wrangler TJ Bumper Combo Front + Rear Bumpers with D-Rings & Receiver Hitches Compatible with Jeep Wrangler TJ 1997-2006

  • Hooke Road Front Bumper + Rear Bumper Kit Fit for Jeep Wrangler TJ 1997-2006.
  • Two Stage Textured Black Powder Coat Finish.
  • High Strength D-Ring Mounts w/ D-Rings Included.
  • Front Bumper:D-Rings & 2x LED Accent Lights included.
  • Built-in winch plate for up to 12,000lb. winch.
  • 2 Year Hooke Road Manufacturer's Warranty & Life time customer support.
Check Stock

Vijay Front and Rear Bumper Textured Black with 9 Aluminum alloy LED Lights and Winch Plate for 2016-2022 Tacoma

  • [Compatible with ]: 2016-2017-2018-2019-2020-2021-2022 Tacoma.
  • [Material]: The precise tolerances range from 5/32 inch thick neutral steel plate and 2 inch x 0.120 inch steel pipe to provide excellent strength and....
  • [Package size and weight]: Front bumper size: 40.6"X25.2"X16.5". Weight: 145.8 lb /Rear bumper size: 69.7"X12.2"X13". Weight: 65.5 lb (Package size≠....
  • [Package]: Front bumper(with winch seat) + Rear bumper + LED lights + D-rings + Rubber ring + Screw + Installation manual.
  • [Easy installation]: No cutting or drilling is required,direct bolt-on.
Check Stock

Tioyar Front Bumper w/Winch Plate + 5 LED Lights Fit 1984-2001 Cherokee XJ and Comanche MJ

  • Fit 84-01 Cherokee XJ /1984-2001 Comanche MJ.
  • Bumper uses 5/32" thick low carbon hard steel and 2" x 0.120" precision tolerance steel tubes to make the bumper harder and more durable. The grade 3 textured black powder coating is corrosion resistant and durable..
  • Front bumpers have two 4.75-ton high-strength D-ring mounting seats welded into the bumper. A total of 2x4.75T D-rings are provided. The front bumper contains a built-in winch plate that can support a 12,000-pound winch. inside and outside of the D-ring mount are mechanically welded to achieve maximum strength..
  • Both the inside and outside of the D-ring mount are mechanically welded to achieve maximum strength. Even on a dark road, the built-in LED light can provide a clearer view. It is also safer when off-road. The front bumper is equipped with 1x144W LED aluminum light + 2x20W LED aluminum lights + 2x18W LED aluminum lights..
  • Easy to install without drilling or cutting. Follow the instructions to install!.
Check Stock

Breathalyzer, Personal Alcohol Tester with LED Display and 5 Replacement Mouthpiece

  • 6 Measurement Units and 32 Records: There are six commonly used measurement units for you to choose (%BAC, ‰BAC, mg/L, g/L, mg/100ml, ‰PROM). The latest 32 measurement results can be recorded. The measurement range of each unit is 0~0.199% BAC, 0~1.999‰BAC, 0~1.999g/L, 0~0.999mg/L, 0~1999mg/100ml, 0~1.999‰PROM..
  • Sound Warning and Color Distinction: In addition to the numbers displayed, the results can be distinguished by sound and color. The screen will turn green and the alarm will make a "di"sound if the result is lower than warning value. The screen will turn yellow and the alarm will make sound as "di di" if the result is between warning value and dangerous value. The screen will turn red and the alarm will make sound as "di di di..." for about 15 seconds if the result is higher than dangerous value.
  • Easy to Use: Just keep pressing the power button for 2 seconds to start the alcohol breathalyzer tester. Wait for 15 seconds for preheating and then keep blowing for 3-5 seconds to get the result. The result will be displayed on the LCD screen of breathalyzers for 15 seconds. NOTE: In order to make the test results more accurate, please use the alcohol tester after stopping drinking for 20 minutes, and ....
Check Stock

Ronghui Silverado Front Bumper with Winch Plate and LED Lights and D-Ring for 2015-2016-2017-2018-2019 Chevy Silverado 2500/3500

  • Suitable for 2015-2016-2017-2018-2019 Chevrolet Chevrolet 2500/3500 models..
  • Bumper is equipped with 1x144W LED Spotlight Bar and 2x20W LED Light + 2x18W LED aluminum lights + 2x4.75T D-ring..
  • Front bumper is equipped with two 9500-pound rated D-rings on a sturdy mount, and is equipped with a sturdy tube on the rider, and provides additional lighting. Includes black isolator and gasket. The front bumper has a built-in winch plate that can support a 12,000-pound winch..
  • Material: 5/32" steel and 2" x 0.120" seamless tubes for excellent strength and stiffness. The winch can withstand 12,000 pounds and the three-stage black powder coating on the front bumper of the winch is more durable and corrosion resistant..
  • Easy to install. No drilling or cutting is required. Install directly with screws..
Check Stock

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 2005-2015 for Toyota Tacoma Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 for Toyota Tacoma.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add protection to your precious vehicle while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style..
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced laser welding technology for long lasting surface protection...
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware. Parking sensor holes: Front: no.
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with instruction for installation..
Check Stock

FINDAUTO Front Bumper & Rear Bumper Combo Fit for 2007-2018 for Jeep Wrangler JK Upgraded Textured Black Rock Crawler Bumper with Winch Plate & LED Light and D-Rings

  • [Fits Following Vehicles] - 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 for Jeep Wrangler JK.
  • [Heavy-Duty Protection] - FINDAUTO Front Bumper and back Bumper are manufactured from heavy duty 5/32" steel sheet and 2"X0.120" steel tubing to add protection to your precious vehicle while providing it with superior towing capabilities with its heavy-duty D-rings. It also gives your vehicle an attractive upgrade in its appearance for added style..
  • [Surface Protection.] - Premium Two stage finish using epoxy pre-coating and high-grade textured black powder coating and along with our advanced laser welding technology for long lasting surface protection...
  • [Package included] - 1x Front Bumper,1x Rear Bumper,4x D-rings,All mounting hardware. Parking sensor holes: Front: no.
  • [Bolt-on Installation] - The bumper is engineered to be a direct bolt-on installation for your, No Drilling or Modification Require,Package Comes with instruction for installation..
Check Stock

Stinger Front Bumper with Winch Plate Fit 07-18 Wrangler JK

  • STINGER BAR - This rock crawler bumper's benefit is the bolt on stinger bar, which will help to prevent your JK from flipping forward when coming down....
  • PERFECT FOR OFF-ROAD USE - EAG JK stinger front bumper features 9.500 lb D-ring shackles on beefy mount, a built-in winch plate and OE fog light....
  • HEAVY DUTY CONSTRUCTION - EAG manufactures their JK stubby stinger bumper from 5/32" steel sheet and 2" x 0.120" seamless tubing for superior strength....
  • CUSTOM FIT - EAG stinger bumper fits for 2007-2018 Wrangler JK. Does not fit for 2017 JK Rubicon Recon..
  • SIMPLE BOLT-ON INSTALLATION - EAG engineered this JK stinger bumper to be a direct bolt-on replacement, no drilling or cutting require..
Check Stock

Hooke Road JK Rear Bumper with Spare Tire Rack + Steel Front Bumper Combo Compatible with Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors

  • Fitment - Hooke Road Front Bumper & Rear Bumper w/Tire Carrier Combo Fits for Jeep Wrangler JK & Unlimited 2007-2018 2/4 Doors(Exclude 2018 Wrangler JL)..
  • Heavy Duty Construction & Corrosion Resistance - The bumpers are manufactured from durable 5/32" steel sheet and 2"X0.120" steel tubing. Two stage finish using E-Coat pre-coating and high-grade textured black powder coating for long lasting corrosion resistance..
  • Front Bumper - Built-in 10*4.5" winch plate for up to 12,000lb. winch.
  • Two D-rings and 4x 18W LED lights are included..
  • Rear Bumper w/Tire Carrier - Include 2" standard receiver hitches.
  • Two D-rings and 2x 18W LED lights are included.
  • Tire carrier open with door, accommodate up to a 37" tire..
  • Easy Bolt-on Installation - Desiged to be a direct bolt-on aftermarket bumper using just basic hand tools, no drilling or cutting required for a clean straight forward installation. (Installation instruction included)..
Check Stock