Top 17mm Ball Mount Phone Holders Reviews

LOFOME Universal Air Vent Clip for Car Mount,Sturdy Vent Grip for Most Car Phone Holder&Wireless Car Charger-Only Vent Clip for Replace/Upgrad(Compatible with Joint Ball Diameter 0.67 in/17mm)

  • ...ws you to no longer affect safety by finding cables while driving..
  • 【UNIVERSAL BALL JOINT】The diameter of the ball is 0.67 inches/17mm, 360° Rotating,fit for most car mounts and other air vent mounts in the market,Suitable for more than 98% of car vents Car holder accessories Compatible with all car smart phone holders and tablet holders.(please refer to the sizes strictly and note phone holder is not included,please purchase separately or use old holders as replacements and upgrades ).
  • 【EASY INSTALLATION】Benefit from the special design of the clip mount, this car mount is quite easy to install, just need to put it on the car’s outlet blades and adjust the length of hook by turning the knob to match the outlet(360° Rotating hook also). Then finish the installation..
  • 【WIDE COMPATIBILITY】This vent clip fits for Horizontal air outlet,Vertical air outlet,Round air outlet(Especially it perfectly matches the round air outlet of Various Mercedes-Benz cars:Mercedes-Benz A/B/C/E/S class, GLA, GLC, GLK etc). Universal car phone holder accessories, car phone accessories with buckle technology,Very steady..
  • 【EXCELLENT RESISTANT】The tough ball head, made of ABS, can bear at least 45 pounds (20 kilograms) of weight.This clip mount is resistant....
Check Stock

Conrad (Savage Kings MC - South Carolina Book Series 4)

  • The GPS long arm suction cup mount with 17mm ball, telescoping arm is adjustable from 4.53 to 6.89 inches and swivels 270 degrees..
  • This GPS car mount features an extra strong suction cup with super sticky gel to stably mount your Garmin GPS in the best visual position..
  • Package includes: One suction cup mount( main body made of high quality ABS ), wipes( for cleaning mounting surfaces ), installation manual..
  • Suitable for Garmin GPS devices with 17mm swivel ball mounting pattern..
  • Also works for GoPro Action Camera & car phone holder with 17mm swivel ball mounting base..
Check Stock

ARKON GN079WD Replacement Upgrade or Additional Windshield Dashboard Sticky Suction Mounting Pedestal with 3-Inch Arm for Garmin nuvi GPS

  • Fits Garmin nuvi devices with 17mm swivel ball mounting pattern.
  • Sticky suction base provides a maximum surface bond on smooth surfaces.
  • Suction mount arm adjusts vertically and provides 360-degree rotation.
  • This mount package includes only the Sticky Suction Mounting Pedestal with 3-inch articulating arm and 17mm ball head, and an optional 3M adhesive dashboard mounting disk. (The above listed Garmin nuvi devices should include a 17mm swivel ball-compatible holder.
Check Stock

Aluminium No Tool Installing 1 Ball Adapter Mount Base for 0.5 -1 -1.26 Handlebar Bike/Motorcycle Phone Holders Compatible with RAM Mounts

  • ❒1" Ball for Handlebar Phone Mounts: this handlebar ball base is with 1" diameter to fit all motorcycle/ bike phone mounts with 1" sockets..
  • ❒Aluminium for Never Breaking: made from all aluminium, this ball adapter makes phone holders super steadily even on rocky roads!.
  • ❒No Tool Quick Installation/Disassembly: to lock or loose the ball mount by screw, this ball adapter realizes one-hand easy and quick....
  • ❒Wide Fits: coming with two rubber gaskets and one non-slip handlebar tape, it universally fits to 0.5"-1"-1.26" handlebar diameter.
  • ❒360° Rotation: this ball adapter allows motorcycle phone mount to free rotation on handlebars..
Check Stock

17mm Ball Car GPS Mount for Garmin, VAZESWIN Dashboard Windshield Suction Cup Car GPS Holder for Garmin Zumo Nuvi Dezl Drivesmart Drive Driveassist RV StreetPilot DriveLuxe Aera DriveRrack

  • The GPS long arm suction cup mount with 17mm ball, telescoping arm is adjustable from 4.53 to 6.89 inches and swivels 270 degrees..
  • This GPS car mount features an extra strong suction cup with super sticky gel to stably mount your Garmin GPS in the best visual position..
  • Package includes: One suction cup mount( main body made of high quality ABS ), wipes( for cleaning mounting surfaces ), installation manual..
  • Suitable for Garmin GPS devices with 17mm swivel ball mounting pattern..
  • Also works for GoPro Action Camera & car phone holder with 17mm swivel ball mounting base..
Check Stock

Aluminum Alloy Bike Phone Mount with 360 Degree Rotation, Adjustable Bicycle Handlebar Phone Holder for Motorcycle Mountain Road Hybrid Bike Compatible with iPhone 11 Xs Max X 8 7 6 Plus Samsung S9 S8

  • ❒1" Ball for Handlebar Phone Mounts: this handlebar ball base is with 1" diameter to fit all motorcycle/ bike phone mounts with 1" sockets..
  • ❒Aluminium for Never Breaking: made from all aluminium, this ball adapter makes phone holders super steadily even on rocky roads!.
  • ❒No Tool Quick Installation/Disassembly: to lock or loose the ball mount by screw, this ball adapter realizes one-hand easy and quick installing/disassembly..
  • ❒Wide Fits: coming with two rubber gaskets and one non-slip handlebar tape, it universally fits to 0.5"-1"-1.26" handlebar diameter.
  • the 12mm gasket for rear-view mirror pole installation..
  • ❒360° Rotation: this ball adapter allows motorcycle phone mount to free rotation on handlebars..
Check Stock

iBOLT 25mm / 1 inch to 17mm Composite Ball Adapter for Industry Standard Dual Ball Socket mounting arms- Works with All Industry Standard B Size/ 1 inch / 25mm and Garmin GPS/iBOLT 17mm Brackets

  • This iBOLT 25mm to 17mm Dual Ball Mount arm is made out of a sturdy composite material and is compatible with all industry standard 1 inch / 25 mm....
  • Commonly used as an converter with IBBZ-33921 or IBBZ-33791 and other industry standard 25mm / 1 inch dual ball mounts / arms to any industry standard....
  • With the dual ball adjustments, this mount allows you to have the flexibility of rotating your device 360 degrees. Converts a 1-inch/B Size/25mm Mount....
  • Length of this adapter is 2.5 inches measuring from one end of the arm to the other and is made out of sturdy composite material.*Mounts, holders, and....
Check Stock

1Zero Solid GPS Cup Holder Mount for Garmin [Adjustable Arm], 1Zero Replacement Car Truck Cupholder Ball Mount Compatible with Garmin Nuvi Drivesmart RV Dezl Drive Zumo Driveassist DriveLuxe Navigator

  • ...navigation. 1Zero GPS cupholder mount will also keep your windshield clean for a full view of the road..
  • EXPENDABLE CUPHOLDER GPS MOUNT: 1Zero GPS mount for Garmin is Adjustable and fits firmly and perfectly，securely in the cup holder for car, truck, Overlanding, MPV, RV, SUV or marine, fitting to varying size cup holders in your vehicle, motorcycle, golf cart or boat with diameter between 3.0 and 4.6 inches. Simple tool-free installation..
  • THOUGHTFUL PROTECTION: Each extension part of the mounting base has a 3mm thick rubber cushion padded, and the bottom of the base has a foam padded, will keep your cup holders from scratches..
  • BROAD COMATIBILITY: 17mm ball mount comaptible with most 3-7 inches Garmin GPS Nuvi 30 40 50 42 44 52 54 55 56 65 66 57 58 67 68 1100 1200 1210 1240 1250 1300 1310 1340 1350 1370 1390 1410 1440 1450 1480 1490 1690 1695 2200 2250 2300 2350 2360 2370 2407 2408 2417 2447 2448 2450 2455 2460 2467 2475 2495 2497 2508 2539 2547 2548 2555 2559 2567 2589 2595 2597 2598 2599 2639 2689 2757 2789 2797 2798 2799 3450 3490 3550 3590 3597 3750 3760 3790 5000.
  • BUILT TO LAST GIFT FOR ALL DIVERS: It is the most reassuring choice to give this as a holiday Christmas gift to someone you care about that h....
Check Stock

Tuff Tech 23383 Super Stick Windshield/Dash Mount Phone/Tablet Holder

  • Dashboard Phone Mount: The adjustable phone mount is a custom fit cradle that holds onto your device while hitting the trails and off roading.
  • Mounts to windows or dashboard with a strong suction cup.
  • For Multiple Devices: The phone holder features an easy one touch release system that securely holds the phone or tablet in place.
  • The ball socket rotates 360 degrees for easy viewing.
  • Phone Holders: Keep your eyes on the road with a multitude of phone holders with strong grips for rougher terrain.
  • Perfect for different smartphone sizes and using GPS navigation.
  • Interior and Exterior Car Accessories: We provide you with plenty of car auto accessories to customize your vehicle.
  • Check out our floor mats, deer alerts, phone cup holders, chargers Bluetooth speakers and more.
  • Aftermarket Accessories: Custom Accessories is a family owned company and leader in the aftermarket automotive accessories marketplace.
  • We are known for our extensive product line, product innovation and packaging solutions focusing on the consumers’ needs.
Check Stock

Livestream Gear® - Dual Device Mounting Bar with 2 Ball Heads and Spring Mounts to Fit Smartphones, Phablets, and Tablets. Includes 1/4"-20 Threads to Attach Tripod. (Dual Mount Bar w/Tablet Holders)

  • PRO LIVESTREAM - This high quality setup allows for so a variety of configurations. This set includes 2 large sized spring loaded phone/tablet holders (fits nearly all phone sizes as shown in images, and tablets up to 187mm wide). Use two devices at once, and Add your own Tripod..
  • ADD YOUR OWN TRIPOD - Central adapter includes 1/4"-20 threads so you can screw this dual mount bar onto any standard tripod you already own..
  • EASY SCREEN VIEW - Includes two spring loaded device clamps so you can easily attach your phone/phablet/tablet and view the screen. These holders provide a secure hold on your device so it will stay in place. Easy to view the screen in Portrait or Landscape, use 1 device or two..
  • CENTRAL ADAPTER TOP - This dual mount also has an adapter with 1/4"-20 threads on top so you can add an LED light at the center if you choose. See images for example. LED light and devices not included..
  • WHAT'S INCLUDED - Heavy Duty dual mount bar, 5/8 to 14/"-20 screw tripod adapter, 1 pc black 1/4"-20 adapter (center part), 2x Tablet holder clamps (187mm), 2x Bal....
Check Stock

Livestream Gear - Dual Device Tripod Attachment Setup for Live Streaming, Video Recording, Etc. (2 Device Holder)

  • LIVESTREAM - This 2 tripod attachment mount includes phone clamps that work with all Smartphones up to 85 mm wide. Easy-to-use holders, work with any device model, can be used with a case..
  • TRIPOD ADAPTER - Quickly attach this dual device mount to any tripod you already own. Compatible with 1/4-20 threads, or GoPro accessories..
  • EASY SCREEN VIEW - Phone Clamps attach to the durable hand grip and provides a secure hold on your phones so they will stay in place. Easy to view the screen in Portrait or Landscape and read your followers comments..
  • ADJUSTABLE - Move Ball head to get any screen angle that you need..
  • WHAT'S INCLUDED - Dual device bar, tripod adapter, 2 phone holder clamps, 2 screw adapter, 2 thumb screws..
Check Stock

Arkon Bike or Motorcycle Handlebar Mount for Garmin nuvi 40 50 200 2013 24x5 25x5 GPS, Standard Packaging

  • Compatible with Garmin nuvi GPS devices or car mounting bracket holders having the 17mm swivel ball mounting pattern.
  • Mount fits on handlebars measuring up to 33mm in diameter and installs easily.
Check Stock

BRCOVAN Aluminum Alloy 17mm Ball Handlebar Mount, Quick Install & Release Handlebar Ball Base for Garmin GPS Mount & Bike Motorcycle Scooter ATV Phone Holder

  • ▶ The 17mm Ball handlebar mount base accommodates handlebars 0.5'' / 0.87'' / 1'' / 1.26'' in diameter. Features a tool-free designed to install or remove easily..
  • ▶ Set come with three rubber ring inserts to provide a snug fit and protection of the mounting surface. Rubber ring diameter: 0.5''(12mm), 0.87''(22mm), 1''(25.4mm). You can add or remove rubber ring according to the diameter of handlebar. When the rubber ring insert is not embedded, the hole diameter of the handlebar mounting base is 1.26" (32mm)..
  • ▶ The handlebar ball mount utilizes rubber-insert and lock-bolt to prevent loosening in high vibration for mounting to motorcycle & bike handlebars as well as other round rails within the stated dimensions..
  • ▶ Main body made of 6061-T6 aluminum alloy for durability and reliability in the most demanding environments. CNC integrated molding, smooth surface and solid body. TPU over-molding ball head, with anti-slip performance..
  • ▶ Compatible with 17mm swivel ball mounting pattern. Not for 1 inch ball socket system. Works for Garmin GPS mount & other devices with 17mm swivel ball mounting pattern. Suitable for installation on bike, bicycle, motorcycle, stroller, mountain bike, dirt bike, trek bike, road bike, golf cart, electric scooter, ATV,....
Check Stock