Kiro&Seeu 2PCS CD74HC4067 16 Channel Analog Digital Multiplexer MUX Breakout Board CD74HC4067 Precise Module Compatible with Ar-duino DIY D74HC4067-16CH-2P
Use the CD74HC4067 16-channel analog signal switch.
Analog signal input: C0-C15 16 channels..
This is a breakout board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer CD74HC4067..
This chip is like a rotary switch - it internally routes the common pin (COM in the schematic, SIG on the board) to one of 16 channel pins (CHANxx). It works with both digital and analog signals (the voltage can't be higher than VCC), and the connections function in either direction..
To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins!.
4-Channel Mini Quad Video Processor with IR Remote + Multi-View Screen
Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously. Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console..
16 individual input buttons for fast switching between each video input. 16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording. 4 audio inputs with 1 audio output..
16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation. Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time..
Supports programmable motion detection area and sensitivity levels for each camera/input. Flexible external alarm input/output configurations. Supports automatic video loss detection, moti....
16-Channel RCA BNC Video Multiplexer Picture-in-Picture Generator
Advanced 16-channel video multiplexer mixer for real-time multi-channel display on one screen. Full duplex operation for displaying and recording all of its video channels simultaneously. Ideal for security monitoring or video preview application where multiple images are needed. Split-screen modes and PIP locations can be manually configured with ease by the front panel, IR remote or RS232 console. 16 individual input buttons for fast switching between each video input..
16 video pass-through ports. 3 video outputs including 2 composite BNC/RCA video outputs and 1 VGA out at 1024x768 for live viewing and recording. 4 audio inputs with 1 audio output. 16 screen mode options presented in 16/9/8/4/3-grid, quad screen, PIP, picture-by-picture style or single channel full screen. Easy selection for main channel, sub/PIP channel via front push buttons or IR remote for best suited visual presentation..
Supports RS232 long range control and camera control by RS485 connection. Supports time/date stamp and auto sequential switching function with adjustable dwelling time. Supports programmable motion detection area and sensitivity levels for each camera/input. Flexible external alarm input/output configurations. Supports automatic video loss detection, moti....
1500 Watts x 2 @ 4 Ohm. 1000 Watts x 2 @ 8 Ohm. Peak Power Output: 3000 Watts x 2 @ 4 Ohm. 2000 Watts x 2 @ 8 Ohm. 18 Channel mixer section: 16 mono....
Built in recording - allows you to record your main mix on to a USB drive. USB supported formats are MP3, WAV, WMA. Built in advanced bluetooth....
FX footswitch input lets you turn your effects on or off. 4-Band EQ (high, high-mid, low-mid, low) per channel. Each channel is equipped with pad,....
Aux send and Aux returns on every channel to connect all types of external effects and processors. You can control your monitor mix and check levels....
Package Includes: (1) RockvilIe RPM1870 18 Channel 6000w Powered Mixer w/USB, Effects/16 XDR2 Mic Pres. (1) RockvilIe SX1225 12 Channel 25 Foot XLR Snake Cable, 100% OFC, Double Shielded. Features: RockvilIe RPM1870 6000 watt Powered Mixer, 7 Band EQ, 24-Bit Effects, USB, Bluetooth, and 48V Phantom Power. RMS Power Output: 750 Watts x 2 @ 4 Ohm. 500 Watts x 2 @ 8 Ohm. Program Power Output: 1500 Watts x 2 @ 4 Ohm. 1000 Watts x 2 @ 8 Ohm. Peak Power Output: 3000 Watts x 2 @ 4 Ohm.
2000 Watts x 2 @ 8 Ohm. 18 Channel mixer section: 16 mono channels, 1 stereo channel. 18 high-quality XDR2 mic preamps with switchable +48 V phantom power for condenser microphones. XDR2 mic preamps are low-noise and low distortion. These are some of the best sounding mic pres on the market. Built in USB allows you to play songs from your computer or a thumb drives. Built in recording - allows you to record your main mix on to a USB drive. USB supported formats are MP3, WAV, WMA.
Built in advanced bluetooth wireless audio streaming with the most reliable Bluetooth chip on the market. 24 BIT digital effects processor with 16 preset digital effects including (reverb, chorus, delay, chorus, phaser, flanger and various multi-effects). Effects level control can adjust signal level o....
12Pcs CD74HC4067 16-Channel Analog Digital Multiplexer MUX Breakout Board Module CD74HC4067 CMOS Precise Module Compatible with DIY
CD74HC4067 board for the very handy 16-Channel Analog/Digital Multiplexer/Demultiplexer, use the CD74HC4067 16-channel analog signal switch.
It works with both digital and analog signals (the voltage can’t be higher than VCC), and the connections function in either direction.If you want two-way communications,you can add a second board to route your microcontroller's TX line to 16 device's RX lines. By using multiple boards, you can create similar arrangements for I2C,SPI,etc..
The internal switches are bidirectional, support voltages between ground and VCC, have low “on” resistance and low “off” leakage, and to prevent crosstalk, perform “break-before-make” switching. The board also breaks out the chip’s “enable” pin, which when driven high, will completely disconnect the common pin (all switches “off”)..
To control it, connect 4 digital outputs to the chip’s address select pins (S0-S3), and send it the binary address of the channel you want. This allows you to connect up to 16 sensors to your system using only 5 pins..
Since the mux/demux also works with digital signals, you can use it to pipe TTL level serial data to or from multiple devi....
Features of RPA16: RockvilIe RPA16 10,000 Watt Peak 2 Channel Professional/DJ Rack Mount Amplifier, LCD displays volume in dB per channel and operating temperature, 2U rack space, Built in limiter protects your speakers from distortion and clipping, Bridged mode allows you to combine both channels power into one channel for use with a subwoofer, Stereo mode is perfect for (2) speakers or (4) speakers in a left and right configuration.
Parallel mode gives you dual mono output signal which is perfect for monitor use when you want all sounds coming out of each speaker instead of a left/right configuration, Built in crossover switch (bypass, 80 Hz, 160 Hz) allows amp to be used with full range PA speakers, or Subwoofer(s), Channel A & B Clipping Led Indicators, Channel A & B Separate Level Controls, Power, signal, clipping, and protection LED indicators on front of amp, Heavy duty rack mount ears with handles.
Built-in variable high velocity quiet cooling fans, Maximum headroom for 4-ohm and 8-ohm Speakers, Level controls for precise setting and matching of sensitivity, Compute....