Wireless Shutter Camera Remote Intervalometer Timer Compatible with Sony a9, a9M2, a7, a7M2, a7M3, a7RM2, a7RM4, a7SM2, a6600, a6500, a6400, a6100, ZV-1; Replaces Sony RM-SPR1 Cable
... S ( instant single shooting ), C ( continuous shooting ), B ( bulb exposure ) and 2S ( 2 seconds delay ).
5 Settings for Timing Control – DELAY ( delay timer ), LONG ( long time exposure timer ), INTVL ( interval timer ), N ( number of exposures ) and BKLN ( Exposure time exponentially incrementing timer )..
With LCD screen, you can set the function you want, and the display is easy to understand. Under timer mode, delay exposure, long exposure, interval, exposure number function can be programmed together, this timer intervalometer great for time-lapse recording of blooming flowers, astrophotography, etc..
This AODELAN wireless shutter release timer with 2.4GHz wireless transmission , working distance up to 60M/200ft. Suitable for shooting wild animals in the wild..
This intervalometer can be used as a wireless controller. The transmitter can detect the radio signal from the receiver automatically, providing more convenient for wireless timing and remote shutter release control. The intervalometer also supports working as a wired controller, the transmitter can connecting to the camera directly..
10 Pack DataOcean 16GB USB 2.0 Flash Drive Memory Stick Thumb Drives (10 Colors)
[10PCS 16GB Mixed Colors]: DataOcean USB flash drives come with 10 colors, different colors to help you identify different content.
[Metal cover rotating with keychain]:The 360° rotating design does not need to worry about losing the cap. Keychain design, don¡¯t worry about losing the U disk.
[COMPATIBILTY AND INTERFACE]:Compatible with USB 2.0 and backwards. No need to install any additional drivers to use to the flash drive. Support Win98/ME/2000/XP/Vista/7/8/10, Mac OS and Linux, support portable speakers, car speakers with USB 2.0 port.
[After-sales Service]:12 month Warranty. Please contact us first for any problems with our jump drives. We will solve it as soon as possible..
[About the capacity and speed]:The available capacity: 14.6GB-14.8GB, FAT32 is factory default drive format.Transfer Speed: writing: 7M/s-12MB/s.
AODELAN Camera Timer Shutter Remote – Timelapse Intervalometer Shutter Remote Release Control for Sony A9 a7 a7III 7RIV ZV-1 a6000 a6400 a6600 RX10 IV ; Replaces Sony RM-SPR1
...utter release. Half press to auto-focus, fully press to take photo..
Function: shutter release (single shooting, continuous shooting, bulb exposure, 2 seconds delay) and timer functions (delay timer, long exposure timer, interval timer, setting for the number of exposure and auto bracketing timer)..
Easy to Use: With LCD display and backlight design, easy to operate on a sunny day or in the dark. It can avoid camera Shake, Ideal for time-lapse photography to record the blooming flowers, sunsets or the night sky, you don’t need to wait for the whole time..
PHOLSY Wireless Timer Remote Control with Intervalometer HDR for Sony a1, a9, 9M2, a7M4, a7M3, a7RM2, a7RM3, a7RM4, a3500, a6600, a6500, a6400, a6100, RX100M4, RX100M6, RX100M7, RX10M4, HX99, a68
✔ Reduce camera shake and allows you to trigger your camera wirelessly up to 60 metres. You can change different shutter release cable to work with different cameras. Replaces sony RM-SPR1 remote controls and sony RM-L1AM remote commander. Wireless and wired operations.
✔ With LCD display, very convenient to get accurate shooting modes setting information, easy to operate on a sunny day or in the dark..
Sewell SW-32988 Direct BlastIR Wireless Pro IR Repeater, Remote Control Extender Kit (IR Emitter and Receiver),Black
Note Some devices use RF instead of IR for remote control. The Blast IR Wireless Pro only works with IR devices. Please check the signal type of your remote to ensure it is IR before ordering. .Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.)Incompatibility : Yamaha HTR 6140, Arris DCX 3520E-M, OSD ATM-7 Speaker Selector.
BlastIR Pro receivers are directional and require facing the receiver towards where you will be using the remote. To improve reception and widen the angle of control, we recommend using the included IR receiver cable connected to the main receiver unit..
BlastIR Pro Emitters work best when placed within a few inches of the devices you want to control. For best results we recommend attaching the included optional IR emitter cables so that the emitter is directly over the IR receiver of up to two devices. These are designed to stick directly to the devices that you are trying to control rather than sitting in front of them..
Included USB and AC power cables, extra IR cables, mounting adhesive, and rubber feet..
Wireless Distance: 200m (650 ft.), distance may vary due to obstacles, IR Receiver Distance: 7m (30 ft.).
KOOBOOK 1Pcs 3D Printer Control Board Controller PCB Board MKS Gen L V1.0 Integrate Ramps Motherboard 12/24V
2560 and ramps1.4 are intergrated on a piece of board, which solves the problem of complicated and easy failure for Ramps1.4 composite interface.Users can change their own motor drive, support 4988 drive and 8825 drive, TMC2100 drive..
Using CH340 serial chip to ensure the stable and reliable premise, reduce the cost, and to solve the problem of the previous 16U2 hard drive.Using the open source firmware for Marlin, the configuration is exactly the same as for ramps1.4, and can replace for Ramps1.4 directly..
24V input can be accepted, and the same system power can reduce the hot bed current to 1/4, effectively solving the hot bed MOS tube heating problem..
It can be directly connected to 2004LCD display and 12864LCD display, and can be supported by TFT28 and TFT32 touch screen..
The XYZ axis adopts the terminals of different colors to correspond to the motor and the limit switch, and the connection is convenient,reduces the probability of inserting and reversing, and prevents the main board from being damage by the oppsite inserted of the drive..
AODELAN Wireless Shutter Camera Remote Control Timer Intervalometer with for Sony a7 III, a7 II, a7, a7R III, a9, a6000, a6300, a5100
...ansmitter can detect the radio signal from the receiver automatically, providing more convenient for wireless timing and remote shutter release control.2.4GHz wireless transmission , distance up to 60M/200ft.The Transmitter also supports working as a wired controller with it connecting to the camera directly..
With LCD screen, 4 modes for Shutter Release Control – S (instant single shooting), C (continuous shooting), B (bulb exposure) and 2S (2 seconds delay).
5 settings for Timing Control – DELAY (self timer), LONG (long time exposure timer), INTVL (interval timer), N (number of exposures) and BKLN (auto bracketing timer to shoot multiple exposure HDR images)..
HUAWEI P9 Lite (GSM) Unlocked Android 5.2-inch, 13MP Camera Smartphone - Gold
5.2-inch with IPS LCD capacitive touchscreen, 16M colors, HiSilicon Kirin 650, Quad-core 2.0 GHz Cortex-A53 And quad-core 1.7 GHz Cortex-A53. 16 GB ROM, 2 GB RAM. Main Camera: 13 MP, f/2.0, autofocus, LED flash.
Unlocked cell phones are compatible with GSM carriers such as AT&T and T-Mobile, but are not compatible with CDMA carriers such as Verizon and Sprint..
Please check if your GSM cellular carrier supports the bands for this model before purchasing, LTE may not be available in the US as this is the imported international model: GSM850, GSM900, GSM1800, GSM1900, UMTS850 (B5), UMTS900 (B8), UMTS1900 (B2), UMTS2100 (B1), LTE2100 (B1), LTE1800 (B3), LTE2600 (B7), LTE900 (B8), LTE800 (B20). Secondary Cellular Networks: GSM850, GSM900, GSM1800, GSM1900..
This device may not include a US warranty as some manufacturers do not honor warranties for international items Please contact the seller for specific warranty information..
The box contains: Your new device, USB cable, Charger (may be foreign), Documentation..
...ce and ultra-powerful anti-interference ability. With 30 channels for options, it can avoid interference caused by other similar devices..
The wireless shutter release remote is available to control different brand's cameras and models by changing different camera connecting cable.The transmitter and receiver adopts LCD screen which is more easy and simple to handle..