Top 15mm Carbon Fiber Tube Reviews

Aopin Carbon Fiber Rod Pultrusion 5mm(OD) for Quadcopter, DIY Project, Solid Matte Pole, Length 400mm, 4pcs

  • ① Brand introduction: Aopin has more than 20 years of factory product design and development experience, this is your trustworthy guarantee. Since its establishment, we have been adhering to the professional and innovative business philosophy in terms of industrial products Materials, functions, and customer experience..
  • ③ Carbon fiber tube is a kind of composite Material, which is made by mixing carbon fiber and plastic, solidified and pultruded (or wound) at high temperature. It is light in weight, only a quarter of steel, and its strength is dozens of times that of plastic products.The tensile strength can reach 1Gpa and elastic modulus reach 400Gpa, low density, 1.5-2.0g/cm³(1.5-2.0 Gram per cubic centimetre)..
  • ④ Carbon fiber bar perform well in humid or hot environments, even in seawater and coastal environments.Good water resistance and aging resistance, so no matter it is operated in corrosive environment, harsh open air and humid environment, its service life can reach more than 10 years.One of the high-performance fiber Materials..
Check Stock

Replacement Part For Fuselage Decoration Part 1 For Freewing 90mm F15 Foam RC Aircraft FJ30911 0913

  • Package Includes: 1x Fuselage Support Carbon Fiber Tube 12*10*206mm.
  • Item Name: Fuselage Support Carbon Fiber Tube.
Check Stock

uxcell Carbon Fiber Round Tube 10x8x330mm 3K Roll Wrapped Matt Surface for RC Airplane Quadcopter 2Pcs

  • Size and Shape: rounded tube with 10mm outside diameter, 8mm inner diameter, 330mm overall length..
  • Lightweight: strong as metal but only one-fifth in weight, corrosion-resistant, and heat-resisting..
  • Smooth Surface: made of high tensile carbon fiber, matte surface..
  • Application: carbon fiber wing tube is used for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..
  • Note: due to manual measurement, most carbon fiber tube sizes will have a little error..
Check Stock

(2) Carbon Fiber Tubes - 20mm x 18mm x 500mm - 3K Roll Wrapped 100% Carbon Fiber Tube Glossy Surface (2) Tubes

  • Size and Shape: rounded tube with 6mm outside diameter, 4mm inner diameter, 350mm overall length..
  • Lightweight: strong as metal but only one-fifth in weight, corrosion-resistant, and heat-resisting..
  • Smooth Surface: made of high tensile carbon fiber, glossy surface with a polishing finish..
  • Application: carbon fiber wing tube is used for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..
  • Note: due to manual measurement, most carbon fiber tube sizes will have a little error..
Check Stock

27.5er Or 29er Carbon MTB Frame Carbon Mountain Bike Frame 29 Bicycle Frame 135mm Or 142mm Axle (Red Glossy, 29er 17inch)

  • Toray T800 Full Rigid Carbon Fiber mtb carbon frame 29er/27.5er Head Tube1-1/8" to 1-1/2".
  • Bottom Bracket: PF30 (73mm), Available Size: 29er/27.5er 15''/17''/19''/21''，Recommend Size: 15inch(150-165CM), 17inch (165-175CM), 19inch (175-185CM), 21inch (185-195CM).
  • Compatible for 142*12 and 135*9mm,Max Load:250kg , Maximum Tire:2.1 tires, Cable:Internal cable guide, Diameter of Seat post: 27.2mm.
  • Stack: 15inch--609mm, 17inch--614mm, 19inch--619mm, 21inch--624mm.
  • Reach: 15inch--409.3mm, 17inch--418.1mm, 19inch--435.2mm, 21inch: 455.5mm.
Check Stock

MTB Bicycle Suspension Fork 24 26 27.5 29 Inch 3K Carbon Bike Fork Straight Tube 1-1/8\ Disc Brake 700g

  • Name: Mountain bike 3K carbon fiber front fork，Disc brake, fork open file 100mm/3.9 inch, Weight: 710 - 810g ± 10g..
  • Material: T800 high modulus carbon fiber material and Aluminum alloy straight tube..
  • Specification: Ultra-lightweight Full Carbon. Weave: 3K. Finishing: Gloss. Standard: EN Standard..
  • The standpipe : 230mm length straight tube design, pipe diameter 1-1/8" (28. 6mm) disc brake, 9mm quick release..
  • For ：24"/26"/27.5"/29 inch Mountain Bike wheel ..
Check Stock

Aopin Carbon Fiber Tube Pultrusion 2mm(OD) x 1mm(ID) for Quadcopter, DIY Project, Hollow Matte Pole, Length 200mm,4pcs

  • √◊ Brand introduction: Aopin has more than 34 years of factory product design and development experience, this is your trustworthy guarantee. Since its establishment, we have been adhering to the professional and innovative business philosophy in terms of industrial products Materials, functions, and customer experience..
  • √◊ Carbon fiber tube is a kind of composite Material, which is made by mixing carbon fiber and plastic, solidified and pultruded (or wound) at high temperature. It is light in weight, only a quarter of steel, and its strength is dozens of times that of plastic products.The tensile strength can reach 1Gpa and elastic modulus reach 400Gpa, low density, 1.5-2.0g/cm³(1.5-2.14 Gram per cubic centimetre)..
  • √◊Carbon fiber bar perform well in humid or hot environments, even in seawater and coastal environments.Good water resistance and aging resistance, so no matter it is operated in corrosive environment, harsh open air and humid environment, its service life can reach more than 24 years.One of the high-performance fiber Materials..
Check Stock

Carbon Fiber Tube 5mm OD x 3mm ID x 200mm Matt Tubes Rod (4 PCS)

  • carbon fiber tube, is used of high-tech carbon fiber composite material made of prepreg.
  • Carbon fiber tube with high strength, stiffness, load bearing performance.
  • And a light weight (material density 1.9).
  • Good corrosion resistance, good material stability.
Check Stock

SmallRig 15mm Carbon Fiber Rod for 15mm Rod Support System (Non-Thread), 12 inches Long, Pack of 2 - 851

  • It is the new version of carbon fiber rod with the more smooth surface..
  • It fits 15mm rod clamp but its surface is not shiny anymore because we have redesigned it based on some customers' advice..
  • The carbon fiber rods are much lighter than stainless steel rods, but carbon fiber rods are incredibly rigid and durable..
  • Standard 15mm, can be used with 15mm rod clamp, follow focus, matte box, and so on..
  • Package includes: 2 x carbon fiber rod. Please note that the carbon fiber rods do not feature female thread.
Check Stock

uxcell Carbon Fiber Round Tube 3mm x 2mm x 400mm Carbon Fiber Wing Pultrusion Tubing for RC Airplane Quadcopter 10Pcs

  • Size and Shape: pultrusion rounded tube with 3mm outside diameter, 2mm inner diameter, 400mm overall length..
  • Pultrusion: pultruded tube means that all the fibers are in one direction, which makes it stronger than the woven tube in tension..
  • Lightweight: strong as metal but only one fifth in weight, corrosion-resistant and heat-resisting..
  • Smooth Surface: made of high tensile and modulus unidirectional carbon fiber..
  • Application: pultruded carbon fiber tube is used for racing drones, RC helicopter wing, RC airplanes and RC sailboats, kite spars..
Check Stock

2pcs 16mm Carbon Fiber Tube 16mmx14mmx420mm 3K roll Wrapped Plain Matte Finish

  • Tube size: External diameter:16mm, Interna diameter:14mm, Thickness:1mm, Length:420mm..
  • High strength, low weight, UV Resistance.
  • 100% pure carbon fiber imported from Japan.
Check Stock

Carbon SeatPost 27.2 400mm Litetop 3K Carbon Fiber Bike Seatpost Suitable for Most Bicycle Mountain Bike Road Bike MTB MTN BMX Black

  • 3K Carbon Fiber: Constructed of ultra light and strong 3K Carbon Fiber. Light weight, never rust.
  • Size: 27.2 × 400mm (apx 235g/pc), Total length: 400mm, Tube Length: 375mm, Head Length: 25mm. Strength: 4.9 levels ultra high strength, maxium of 580lbs.
  • Setback: 0mm. Adjust tube length of 0 to 370mm.
  • How to Choose the Size:1.Check the diameter of the original seatpost,choose the same size as the original diameter.2.Measure the inside diameter of the frame tube..
  • With adjustable head, Easy to install. Frosting finish, exquisite workmanship, nice touch feeling.
  • Suitable for most road bike, fixed gear bicycle, mountain bikes, downhill bike, track bike, MTB, BMX, DH, etc.
Check Stock

Litetop Carbon SeatPost 27.2 350mm 3K Carbon Fiber Bike Seatpost Suitable for Most Bicycle Mountain Bike Road Bike MTB MTN BMX (Black)

  • 3K Carbon Fiber: Constructed of ultra light and strong 3K Carbon Fiber. Light weight, never rust.
  • Size: 27.2 × 350mm (apx 220g/pc), Total length: 350mm, Tube Length: 325mm, Head Length: 25mm. Strength: 4.9 levels ultra high strength, maxium of 580lbs.
  • Setback: 0mm. Adjust tube length of 0 to 320mm.
  • How to Choose the Size:1.Check the diameter of the original seatpost,choose the same size as the original diameter.2.Measure the inside diameter of the frame tube..
  • With adjustable head, Easy to install. Frosting finish, exquisite workmanship, nice touch feeling.
  • Suitable for most road bike, fixed gear bicycle, mountain bikes, downhill bike, track bike, MTB, BMX, DH, etc.
Check Stock