Top 1550nm Optical Transmitter Reviews

uxcell FC UPC Mechanically Variable Optical Attenuator, Single Mode/Multi-Mode 0-30dB Adjustable Fiber Optic Attenuator

Fiber Mode: 9/125 Single mode / 62.5/125 Multi-mode..
[ADJUSTABLE]: Mechanically Adjustable Attenuation Value: 0-30dB..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Operation Wavelength: 1310nm, 1550nm, 850nm, 1550nm..
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Check Stock

Fiber Attenuator Singlemode Simplex LC/UPC Fixed 2dB

[MAIN PARAMETER]: LC/UPC Female to LC/UPC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Check Stock

Networx Fiber Optic Attenuator, Fixed - LC/UPC 20dB

[MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Check Stock

uxcell 5dB FC Fiber Optic Attenuator, FC/UPC to FC/UPC Single Mode 9/125 Adapter

[MAIN PARAMETER]: SC/UPC Female to SC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Check Stock

uxcell 10dB SC Fiber Optic Attenuator, SC/UPC Female to SC Male Single Mode 9/125 Adapter

[MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Check Stock

Jonard Tools FPL-5050 Fiber Power Meter & Optical Light Source Kit (-50 to +26 dBm, Single-Mode)

ESSENTIAL KIT: This tool kit provides everything you need to provide a stable light source and measure the relative optical power of fiber optic cables.
POWER METER (FPM-50A): Measure single-mode wavelengths from 800-1650 nm with relative power ranging from -50 to +26 dBm.
LIGHT SOURCE (FLS-50): Provides a stable light source at 1310 nm or 1550 nm wavelengths for the optical power meter.
INCLUDED ADAPTERS: Includes FC, SC, and LC adapters for both power meter and light source for PC/UPC connectorized cables.
INCLUDES: FPM-50A Power Meter, FLS-50 Optical Light Source, and H-22 Carrying Bag with Straps.

Check Stock

uxcell 5dB SC Fiber Optic Attenuator, SC/UPC Female to SC Male Single Mode 9/125 Adapter Green

[MAIN PARAMETER]: SC/UPC Female to SC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Check Stock

uxcell 3dB SC Fiber Optic Attenuator, SC/UPC Female to SC Male Single Mode 9/125 SC Adapter Green

[MAIN PARAMETER]: SC/UPC Female to SC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Check Stock

WANLUTECH OTDR Tester CCTV Tester, 1310/1550nm OTDR Fiber Optic Tester 8'' Touchscreen Built-in DMM OPM OLS VFL Event Map Support TVI CVI AHD IP CVBS Camera Test PoE/HDMI in/RJ45 Cable TDR Test

✅【All-in-one OTDR Tester】WANLUTECH MT-8000 combines all necessary fiber optic testing in one handheld device.This OTDR tester includes Optical Time Domain Reflectometer (OTDR:1310nm+1550nm,28dB/26dB,max test distance can up to 110km), Visual Fault Locator (VFL:max test distance 8km), Optical Power Meter (OPM:measurement range -70~+10 dBm), Light Source (CW,270 Hz, 330 Hz, 1 kHz and 2 kHz),Digital Multimeter(DMM) , Optical Loss Test, RJ45 cable test, Event Map, etc..
✅【Professional OTDR Fiber Optic Tester】WANLUTECH OTDR tester uses automatic testing by default, just click to start testing after connecting into the fiber, there is no complicated parameter setting.
professional technicians can set the test range, pulse width and other parameters before testing, which will get more accurate curve results.Warning function could prevent OTDR module from being damaged by optical signal in fiber..
✅【Parameters】WANLUTECH multifunctional Single Mode OTDR has 8'' retina touch screen, 2048*1536 resolution. OTDR fiber tester is powered by 7.4V/7000mAh Li-polymer batter with long working time.Interface type:FC-PC.1310nm/1550nm Testing Wavelength and 28....

Check Stock

EZ-FIT New LC Fiber Optic LCUPC-5DB Optical Attenuator LC-UPC Fiber Attenuator 5dB Singlemode Fixed Fiber Optical Attenuator

[MAIN PARAMETER]: FC/UPC Female to FC/UPC Male.
[MATERIAL]: The core material of the adapter is ceramics..
[FEATURE]: To ensure the optical power stay in a stable level on its original transmission wave.High attenuation accuracy, low added loss and good stability..
[SPECIFICATION]: Bandwidth: 1260nm - 1640nm.
[APPLICATION]: Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation..

Check Stock

uxcell 10dB LC Fiber Optic Attenuator, LC/UPC to SC/UPC Single Mode 9/125 Adapter

Polish Type: Ultra Physical Contact (UPC).

Check Stock

5 Pcs Fiber Optic attenuator, Fiber Signal Attenuation Converter Inserts Connector (FC-APC, 20dB)

【Connector Type】 20dB attenuation amount, FC-APC Female to FC-APC male attenuator, adopting high performance attenuated fiber.
【Operation Wavelength】This attenuator is suitable for both 1310nm and 1550 nm single mode fiber connection.
【High Attenuation Precision】 Attenuation precision: ±10%, when connector attenuation amount003e5dB.
【Transmission Stability】 Reflectance: dB≥50, which ensures the optical power stay in a stable level on its original transmission wave..
【Easy Installation】 The simple and compact structure make it very user friendly, just need plug and play for installation.
【Product Application】 Widely used in the fiber optic communication system, for example, optical instrument calibration or fiber signal attenuation etc..

Check Stock

RiteAV - Direct Burial/Outdoor LC-LC 2-Strand Fiber Optic Cable - Multimode (50/125) - 75M (246ft)

...tion: 5m(16ft) SC/APC to SC/APC Fiber Patch Cable OS2, SC cable single mode is 9 / 125 μ m. 10GBASE-L (1310 nm), 10GBASE-E (1550 nm). Sheath material: LSZH fiber Color: yellow. The outer diameter is 2.0mm.
The model of this fiber is a 5m- 16ft SC/APC - SC/APC single- mode optical fiber fiber with fiber diameter of 2.0mm and LSZH. It is very durable for indoor use and meets all UL, CUL, IEC and ROHS standards. This optical fiber patch cord is very suitable for home and office. It is used to connect 1g/ 10g/ 40g/ 100g Ethernet cables..
This SC/APC - SC/APC fiber patch cord is used in Gigabit Ethernet, fibre channel, LAN, data center, building installation, Wan, commercial and other high-density applications. We have been verified by the authority of the industry that the single-mode optical fiber jumper completely meets the needs of optical fiber professionals..
Our optical fiber jumper has high-quality materials: the optical fiber jumper is made of environmentally friendly LSZH material. The jumper is soft and has a strong texture. It will not fade or break, nor will it deform and withstand high temperatures. Ceramic connec....

Check Stock