Top 140mm Case Fan Reviews

Pccooler 140mm Fan Moonlight Series, PC-M140 RGB LED PWM Fan with Duo-Side Halo - SilentPro 9 Fan Blade - Hydraulic Bearing - High Performance Cooling Computer Case Fan (Compatible PC-3M120 Series)

【SilentPro 9 Fan Blades & Wolf Claw Bionic Design】The unique design of the 9 fan blades and the bionic claw guide groove on the back concentrates the wind on the leading edge of the blade, providing efficient ventilation and achieving higher wind pressure and lower noise.Make the pc case achieve the effect of rapid heat dissipation in the shortest time..
【Top Bearing Technology & Shockproof Design】PC-M140 adopts hydraulic bearing technology, which can provide lower noise, higher performance and longer service life. Lifetime>30,000 hours. 8 rubber anti-vibration pads are fixed on both sides of the fan to ensure that the fan will not vibrate during operation and reduce the noise output of the fan and the chassis..
【Wide Compatibility】Compatible with PC-3M120 series, but not compatible with PC-5M120 series. Suitable for 140/280mm liquid cooling and computer case. Smart Choice for your Case's Cooling Solution. If you want to use multiple PC-M140 fans, you can buy ARGB Split cable to DIY. Please check if your motherboard RGB supports 5V3pin. If not, this series is not compatible..

Check Stock

Scythe Kaze Flex 140mm Fan, PWM 300-1800RPM, Quiet Case/Radiator Fan, Single Pack

140mm PC fan with standard mounting space, the fan is ideal for computer case ventilation and water cooling radiator..
Sealed Precision Fluid Dynamic Bearing: the bearing and the spindle are made of high quality compressed metal and are lubricated by a special oil film resistant to temperatures of up to 250C° / 480F°. This drastically reduces friction, ensuring smooth operation and reduced wear, which results in long life span and silent operation..
Included antivibration rubber pads covering each corner of frame. These decouplers effectively reduce possible vibrations and allow silent operation..
Newly designed blade and frame contribute high airflow with low noise, ideal thermal fan for computer case and CPU cooler/heatsink. PWM control offers wide range fan speed for various application and system..
Connector: 4-Pin, Dimension: 140x140x25mm, Fan speed: 300±200~1800±10% RPM, Airflow: 16.8~100.8CFM, Noise: 4.19~26.45dBA, Static Pressure: 0.08~2.81mmH2O, MTTF: 120,000hrs.

Check Stock

Cable Matters 2-Pack 2 Way 4 Pin PWM Fan Splitter Cable - 4 Inches

PC fan splitter Y cable connects 2 computer case fans to a single motherboard fan header.
1 to 2 case fan splitter connects an additional fan to increase airflow in your computer case.
Mobo 4 pin fan splitter connects to the 4-Pin header on the motherboard and splits the signal to 2 PWM fans.
Fans can spin at the same speed using software from a motherboard equipped with PWM control.
Master / slave PWM splitter has a 4 pin fan connector a wire that sends the RPM signal to the motherboard connector for synchronizing the fan speed with the other fan.
The computer fan splitter omits the RPM signal pin for tandem fan speeds with both fans.
Double CPU fan splitter adds 4 fans with the Cost-effective 2-pack of fan header splitter.
Sleeved and wrapped black 4-inch PWM Y cable provides a tidy look in an open computer case.
3-pin & 4-pin fan compatible with popular brands of computer case cooling fans Corsair Air Series AF120 80mm / Series AF140 High Airflow, Cooler Master Blade Master 80 / Master 92, Cooler Master Hyper 212 EVO 120mm, Cooler Master JetFlo 120mm, Cooler Master SickleFlow 120mm, Cooler Master MegaFlow 200mm, Noctua NF-F12, Thermaltake WATER 3.0 Dual 240.

Check Stock

CORSAIR OBSIDIAN 450D Mid-Tower ATX Case - Airflow Edition

Includes two AF140L intake fans, and a rear AF120L exhaust.
Tool-free SSD cages hidden behind the motherboard tray. Case Dimensions- 19.4 x 8.2 x 19.5 inches.
Radiator and fan compatibility : Top: 3 x 120mm or 2 x 140mm (360mm radiator) Front: 2 x 140mm or 2 x 120mm (2 x 140mm included) (280mm radiator) Bottom: 2 x 120mm (240mm radiator) Rear: 1 x 120mm (120mm included) (120mm radiator).
Two USB 3.0 front panel connectors, plus headphone and microphone.

Check Stock

Segotep T1 Full-Tower E-ATX Gaming PC Case, Graphics Card Vertical Mounting w/Tempered Glass Side Panel, USB 3.0 Type-C I/O, Cable Management/Optional 360mm Radiator (No Fan Included)

【Vertical GPU Mount Ready】 Computer gaming case allows users to securely mount the graphics card, or any PCI Express card vertically inside your case. Different from Graphics Card horizontal installation, It’s no need to worry about deformation..
【Spacious Open interior】Gaming computer case supports up to E-ATX motherboard, and up to 360mm water cooling radiator in front or 360mm in rear, with vertical GPU 345mm support which no need to worry about deformation..
【Show Off Your Lights】E-ATX PC case with 0.7mmSPCC transparent tool-free glass side panel allows for a great view of your RGB components and internal hardware..
【Optimal Cooling Performance】Superior airflow with space for up to 7 pc case fans. The detachable fan bracket of the full-tower case can install 120mm or 140mm fans*3, and one 120mm on the top of the case, rear-mounted support optional 120mm fan*3 or 140mm fan*2..
【DUST-PROOF Design】The upper and lower parts are equipped with Pull-out dustproof filters, including the magnetic dust proof net on the front panel, which can effectively prevent dust....

Check Stock

Yorelove 140mm Fan Dust Filter Mesh Magnetic Frame PVC Computer PC Case Fan Dust Proof Filter Cover Grills Black 4-Pack Ultra Fine Nylon Filter-140mm

【Nylon Filter】140mm 5.51inch nylone fan dust filter cover grills,reduce the fan and parts cleaning time,prolong its'working life,even if filter....
【Block Dust Great】Mesh Diameter is 0.18mm, which can facilitate ventilation, reduce the temperature of computer cabinet and fan, effectively....
【Keep Airflow Good】Ultra Fine Nylon Mesh Would not Block of the Airflow From the Fans, Keep Fans Efficiency and Air Circulation in the Case,....
【Application】 It can be used for home computer chassis fan dust filter, speaker grilles and other electrical / electronic products speakers dust....
【Specifications & Package】140*140 mm/5.51 x 5.51 inches (L*W), mesh diameter of 0.18 mm. Package Includes: 4 x Magnetic Nylon Filter..

Check Stock

Apevia LP314L-RGB Lunar Pro 140mm Silent Dual-Ring RGB Color Changing LED Fan for Gaming with Remote Control, 32x LEDs & 8X Anti-Vibration Rubber Pads (3-pk)

Apevia 140mm Silent Case Fan w/ 32x RGB Color Changing LED Lights (16 Outer Ring / 16 Inner Ring) & 8x Anti-Vibration Rubber Pads (4 on Each Side).
Comes with controller box that supports up to six specially designed compatible fans and remote control to change color and pattern of the lights..
Up to 366 different color and style combinations. Can speed up and slow down as well as change the brightness of the LED lights via remote control. Fan speed cannot be changed with the controller..
140mm x 140mm x 25mm. Fan Speed: 1200 +/- 10% RPM. Air Flow: 59.6 CFM. Low Noise Level: 29.4 dBA. Life Expectancy: 25,000 Hours. Control Box comes with 4-pin connector for connecting to power supply. Case screws are included..
High quality control standards provide reliability and extended use of the fans..

Check Stock

Antec NX410 ATX Mid-Tower Case, Tempered Glass Side Panel, Full Side View, Pre-Installed 2 x 140mm in Front & 1 x 120 mm ARGB Fans in Rear (White) (9734088000)

3 ARGB Fans Included : 2 x 140 mm ARGB fan in front & 1 x 120 mm ARGB fan in rear..
Tempered Glass Side Panel : Tempered Glass Side Panel can enjoy the simple and clean white appearance without losing the gorgeous RGB effect which inside your rig..
High Efficiency Cooling Design : 2 x 140mm ARGB fan which installed in front of the case, effectively drive the air convection to achieve awesome cooling effect for your rig..
Grid Front Panel Design : The staggered grid design improves the overall appearance design sense and achieves the ultimate efficiency and beauty on the basis of keeping the heat dissipation..
MOBO Support : ATX, micro-ATX, ITX, Provide a variety of MOBO size options at 390 mm x 210 mm x 485 mm Case's size..

Check Stock

Apevia LP414L2S-RGB Lunar Pro 140mm Silent Dual-Ring RGB Color Changing LED Fan with Remote Control, 32x LEDs & 8X Anti-Vibration Rubber Pads w/ 2 Magnetic LED Strips (4+2-pk)

Apevia 140mm Silent Case Fan w/ 32x RGB Color Changing LED Lights (16 Outer Ring / 16 Inner Ring) & 8x Anti-Vibration Rubber Pads (4 on Each Side) & 2 x 12" Magnetic with Adhesive Tape Color Changing LED Strips.
Comes with controller box that supports up to six specially designed compatible fans and remote control to change color and pattern of the lights..
Up to 366 different color and style combinations. Can speed up and slow down as well as change the brightness of the LED lights via remote control. Fan speed cannot be changed with the controller..
140mm x 140mm x 25mm. Fan Speed: 1200 +/- 10% RPM. Air Flow: 59.6 CFM. Low Noise Level: 29.4 dBA. Life Expectancy: 25,000 Hours. Control Box comes with 4-pin connector for connecting to power supply. Case screws are included..
High quality control standards provide reliability and extended use of the fans..

Check Stock

140mm Black Fan Grill/Guard with Screws 2 Pack

High Quality Material: This computer fan filter grill is made of the PVC and magnet, which is soft and durable, easy to clean and do not rust..
Size Information: The PC fan dust filter size is 120mm x 120mm x 0.45mm or 140mm x 140mm x0.45mm, (Chose the size you want), the mesh holes diameter....
Excellent Dust Resistance: The fan filter provide great dust reduction properties, which is great to keep your computer fans and computer parts clean.....
Magnetic Design: The pc fan filter use the magnetic frame design which is easy installation and removal..
What You Get: Come with 5 pcs 120mm x 120mm (or 140mm x 140mm) black computer fan filter grills. In addition to the PC, please use it for products....

Check Stock

Vetroo M01 Compact M-ATX Mesh Gaming Pc Case, Pre-Installed 200mm Rainbow Fan, Door Opening Tempered Glass Panel Design, Air-Water Cooling Ready

Stylish Modern Design: The front panel features fine mesh, achieving efficient airflow while also filtering out dust, and the transparent tempered glass side panel provides a window into your system..
200mm Fan Pre-Installed: The case pre-install a 200mm static rainbow fan, the LED button can controlled other RGB fan's lightings. (NOTE: The LED button can't control lighting of the 200mm front fan.
the 200mm front fan can be replaced with 120mm/140mm fans according to your like.).
Powerful Cooling System: The case can support up to 5pcs fans at the same time and max 280mm liquid cooler, it can provide your case great airflow and cooling all the time..
Multifunctional I/O Panel: Power/Reset/LED/2xUSB2.0/USB3.0/Headphone/Mic on the Top, provide great flexibility for various mobile audio accessories and change the lights of RGB/ARGB fans..
Motherboard Support: Mini-ATX, Micro-ATX. It can support Max 340mm length GPU and Max 180mm height CPU, this compact tower case gives you ductility to build your system..

Check Stock

Persberg 100pcs Computer Cooling Fan Mount Screws, M5x10 Black Computer PC Case Fan Screws Black for 70mm, 80mm, 90mm, 92mm, 120mm, 140mm PC Cooling Fan Mount Screws- Screw kit (FANSCREW)(120-19)

Universal computer case cooling fan mounting screws..
Fits for 70mm, 80mm, 90mm, 92mm, 120mm, 140mm computer case fan..
Size: KB 5*10mm, fit for most computer case fan, Standard flat head, phillips head screw..
High grade carbon steel, durable and useful.
Easy to Install, self-tapping thread design for quick and easy installation of most standard plastic-framed case fans.

Check Stock

Vetroo M01 Compact Micro ATX Mini ATX Gaming Pc Case, Front 200mm Rainbow Fan Pre-Installed, Door Opening Tempered Glass Side Panel, Mini Tower Black Mesh Computer Case

Stylish Modern Design: The front panel features fine mesh, achieving efficient airflow while also filtering out dust, and the transparent tempered glass side panel provides a window into your system..
200mm Fan Pre-Installed: The case pre-install a 200mm static rainbow fan, the LED button can controlled other RGB fan's lightings. (NOTE: The LED button can't control lighting of the 200mm front fan.
the 200mm front fan can be replaced with 120mm/140mm fans according to your like.).
Powerful Cooling System: The case can support up to 5pcs fans at the same time and max 280mm liquid cooler, it can provide your case great airflow and cooling all the time..
Multifunctional I/O Panel: Power/Reset/LED/2xUSB2.0/USB3.0/Headphone/Mic on the Top, provide great flexibility for various mobile audio accessories and change the lights of RGB/ARGB fans..
Motherboard Support: ITX, Micro-ATX. It can support Max 340mm length GPU and Max 180mm height CPU, this compact tower case gives you ductility to build your system..

Check Stock