Top 14 1 Wide Reviews

Imachinist S591214 Bi-Metal Band Saw Blades 59-1/2-inch X 1/2-inch X 14 TPI

  • Bi-metal type, 59-1/2" long, 1/2" wide, 14tpi.
  • 14tpi is suitable for cutting thin pipe tube profiles etc.
  • 14TPI is fixed teeth profile, teeth distance is 1.8mm per teeth.
  • Suits all bandsaws which use 59-1/2" long, 1/2" wide bandsaw blade.
Check Stock

Imachinist S9351214 Metal Cutting Bi-Metal Band Saw Blades 93-1/2\ X 1/2\ X 14tpi

  • Bi-metal type, 93-1/2" long, 1/2" wide, 14tpi.
  • 14TPI is fixed teeth profile, teeth distance is 1.8mm per teeth.
  • 14tpi is suitable for cutting thin pipe tube profiles etc.
  • Suits all bandsaws which use 93-1/2" long, 1/2" wide bandsaw blade.
Check Stock

2 pcs Dreambell 14k Gold Filled Interchangeable Leverback Earwires Lever Back Clip Earring Connector

  • Made of 14K Gold Filled (stamped 1/20 14K). Made in USA..
  • Size: approximately 15mm high x 10mm long x 0.6mm wide.
  • inner size: approximately 11mm high x 8mm wide.
  • Closed loop hole size: approximately 1.2mm, 0.8mm wire/ 20GA..
  • There is 100 times more gold in 14 kt. Gold filled (rolled gold) than in gold plate. A 14/20 Gold Filled piece is usually considered as a lifetime piece of jewelry..
Check Stock

Imachinist S93121214SS Bi-Metal 93-1/2\ Long, 1/2\ Wide, 0.025\ Thick Bandsaw Blades for Cutting Stainless Steel (14TPI)

  • Bi-metal type, M42 grade, 93-1/2" long, 1/2" wide, 0.025" thick, 14TPI teeth profile for stainless.
  • Suitable for cutting stainless steel and other steel (hardness less than 30HRC), don't recommend to cut non-ferrous metal.
  • Fixed teeth profile 14TPI is suitable for cutting thin pipe tube profiles etc.
  • 14TPI is constant teeth profile, teeth size: 6/10TPI003e8/12TPI003e14TPI003e14/18TPI003e24TPI.
  • Suits all bandsaws which use 93-1/2" long, 1/2" wide band saw blade.
Check Stock

POWERTEC 13220 60\ x 1/2\ x 14 TPI Bi-Metal Band Saw Blade (Package May Vary)

  • Bi-metal type, HSS M42 grade, 70-1/2" long, 1/2" wide, 0.025" thick, 14TPI.
  • 14tpi is suitable for cutting thin pipe tube profiles etc.
  • 14tpi is fixed teeth profile, teeth distance is 1.8mm per teeth.
  • Suits all bandsaws which use 70-1/2" long, 1/2" wide bandsaw blade.
Check Stock

Canoe Creek White Aluminum Screen Door (80x36)

  • Heavy aluminum frame will not rot, rust, twist or splinter. Aluminum Corner Keys keep the corners tight to prevent door sag...
  • Exclusive Self-Locking Screen System for screens that absolutely will not blow out..
  • 18×14 screen mesh: each square inch of 18×14 screen is equal to 18 little rectangle wide by 14 little rectangle high. Phifer 18×14 screen mesh will last about twice as long as standard screen mesh..
  • Adjustable in width and height. 35-1/2 to 36-1/2 Wide and 79-3/4 to 80-3/4 High.
Check Stock

White Barn BBW Rasberry Tangerine 3 Wick Candle

  • White Barn Bath and Body Works Raspberry Tangerine 3 Wick Candle 14.5 Ounce.
  • Wild Raspberries, Fresh Tangerine, Lemon Zest with Essential Oils.
  • Measures 4" wide x 3 1/2" tall 14.5 Ounce.
  • Measures 4" wide x 3 1/2" tall 14.5 Ounce Burns approximately 25 - 45 hours.
Check Stock

Thomegoods Urethane Band Saw Tire 14 inch x 1 inch x .095 inch for Jet Grizzly,Powermatic

  • Fits Jet JWBS-14DXPRO, JWBS-14CS, JWBS14OS, Grizzly G0457 G0555 G0555P G0555X G0580 T21005 G1019 G1019Z, Powermatic PWBS-14, PWBS-14CS.
  • Urethane Band Saw Tires 14″ diameter x 1″ wide x .095″. They are designed to be installed on any 14″ band saw that requires a 1″ wide and....
  • Made of Urethane, The long-lasting upgrade to rubber belts, Urethane band saw tires most certainly outlast rubber band saw tires and plastic band saw....
  • Urethane tires over rubber is that no adhesive is needed for proper installation. Urethane tires can be stretched to fit and are specifically designed....
  • Inspect belts periodically and replace when worn to maintain peak performance.
Check Stock

3 1 x 29 6 Runner Hand Knotted Sky Blue Fine Turkish Oushak Oriental Rug G9742

  • Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14/18tpi.
  • Perfect for cutting soft ferrous metal only.
  • 14/18tpi is suitable for cutting thin pipe tube profiles etc, do not cut any non-ferrous metal like aluminum etc..
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide bandsaw blade.
Check Stock

Imachinist S645142 Bi-Metal Band Saw Blades 64-1/2\ X 1/2\ X 14tpi for Cutting Metal, (2 Pack)

  • Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14tpi (2 Pack) (please CONTACT US if you only get 1 blade).
  • 14TPI is fixed teeth profile, teeth distance is 1.8mm per teeth.
  • 14TPI is suitable for cutting solid bar and hollow tube.
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide bandsaw blade.
Check Stock

Imachinist S68121214 68-1/2\ x 1/2\ x 14TPI Bi-Metal Band Saw Blades for Cutting Soft Ferrous Metal

  • Bi-metal type, HSS M42 grade, 68-1/2" long, 1/2" wide, 0.025" thick, 14TPI.
  • 14tpi is suitable for cutting thin pipe tube profiles etc.
  • 14TPI is fixed teeth profile, teeth distance is 1.8mm per teeth.
  • Suits all bandsaws which use 68-1/2" long, 1/2" wide bandsaw blade.
Check Stock

Imachinist S645143 M42 Bi-metal Band Saw Blades 64-1/2 X 1/2 X 14tpi (3-pack) for Cutting Metal

  • Bi-metal M42 type, 64-1/2" long, 1/2" wide, 14TPI (3-pack).
  • 14TPI is suitable for cutting thin pipe tube profiles etc.
  • 14tpi is fixed teeth profile, teeth distance is 1.8mm per teeth.
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide bandsaw blade.
Check Stock

Imachinist S64514 Bi-Metal Band Saw Blades 64-1/2\ X 1/2\ X 14tpi for Cutting Soft Ferrous Metal

  • Bi-metal type, HSS M42 grade, 64-1/2" long, 1/2" wide, 0.025" thick, 14TPI teeth profile.
  • 14TPI is suitable for cutting thin pipe tube profiles etc.
  • 14tpi is fixed teeth profile, teeth distance is 1.8mm per teeth.
  • Suits all bandsaws which use 64-1/2" long, 1/2" wide band saw blade.
Check Stock