SEAFLO 14A Series Narrow Low Profile Water Level Sensing Automatic Bilge Pump (1100 GPH, 12V)
- Automatic Water Sensing with Low Profile Strainer.
- Check Valve and fittings for 3/4", 1", 1-1/8", included.
Top 12v Pump Fittings Reviews
Everflo EF2200-QA-BOX 2.2GPM 12V Diaphragm Pump-Quick Attach Port, Black
- 12V pump that can handle up to 2. 2 GPM & 70 psi.
- Includes 1/2" Mnpt & 3/8" Hose Barb fittings.
- Standard mounting pattern to fit most sprayer tanks.
Diaphragm Water Pump 12V with Pressure Switch 3.5 GPM 45 PSI 12 Volt Self Priming RV DC Washdown Pump with Fittings Strainer Filter for Marine Yacht Caravan Garden Hose
- 【RV Water Pump Specification】12V DC water pump features 3.5 gallons per minute water flow, pressure switch is set to 45PSI, 9.0 Max amps..
- 【Safe and Smooth】Our pump have certified to CE, stable and durable, smooth self priming with silent operation and can run dry without damage,....
- 【Exquisite Workmanship】features industry standard fittings, wiring and aluminum alloy mounting base to directly replace similar common water....
- 【Wide Application】Great for use in an RV. It is also the great partner of camper, sprayer, garden sprinklers, fertilizers, sprays as you like.
- 【Why You choose Us】High quality home and industrial facility should be available to everyone. You'll get 1 x RV DC Diaphragm Water Pump, 1 x 1/2....
12V Electric Transfer Pump 5L DC Transfer Pump, 12V 60W Oil Extractor Pump for Car Marine Boat Scavenge Exchange Transfer Pump Engine Oil Extractor
- DC 12V 5L Transfer Pump – Fast & Convenient: This 12v oil change pump is made of premium materials and electric fluid transfer pump can be used for a long time. DC 12V 5L transfer pump maximum flow 5L/min. 12V Electric Oil Extractor Pump allows to be used in a variety of different environments to transport liquids, such as 12v oil extractor pump for boats. Electric oil change pump is easy to use.
- Fuel Extractor Pump are Widely Use:This electric motor oil extractor pump is general industrial equipment, chemical equipment, shipping, vehicle cleaning, agricultural spraying, drinks, carpet and floor cleaning, air cleaning cooling, water purification and water treatment equipment, ZO pipeline pressure, coal and metallurgical industries.
- DC 12V 5L Oil Transfer Pump – Powerful Motor: Oil extractor transfer pump is equipped with the strong motor and adopting a continuous working principle, good help when you pump.Oil & fuel transfer extractor pump maximum voltage reach 12V and the maximum pressure 0.8mpa, the flew rate up to 5L/min. Electric oil extractor pump ideal for filling diesel powered vehicles or engines at your garage or repair shop. It can quickly and conveniently help you solve the problem of pumping liquid.
mistcooling 160PSI Misting Pump (220 V-AC)
- Specs: 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push- lock fitting..
- Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle..
- Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings..
- Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75 degree F - UV Resistant Flexible Tubing - Black Color - UV Treated..
Class A Customs | 25 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2500-BPK-PUMP
- 25 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS 33.5” Longest Length (not including fittings) x 10” x 17”- Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID V....
Class A Customs | 42 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-4200-BPK-PUMP
- 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....
Class A Customs | 20 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-2000-BPK-PUMP
- 20 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 32.5” Longest Length (not including fittings) x 11.75” x 11.75” - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads..
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5....
Class A Customs | 30 Gallon RV Concession Fresh Water Tank with Plumbing Kit & 12 Volt Water Pump | T-3000-BPK-PUMP
- 30 Gallon Fresh or Gray Water Holding Tank Manufactured by Class A Customs - BPA FREE - NSF Approved Materials - Fresh & Drinking Water Safe - Can be used for Gray Water Storage ||WATER TANK MEASUREMENTS: 34 1/2” Longest Length (not including fittings) x 12” x 17 1/2” (rotate tank to change height or width) Average thickness 7/32” +/- (+/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Balloon Style Threaded Female NPT Standard - fitting will be closed, to use remove inner membrane with razor knife (TWO) .5" Threaded Female NPT Standard - open fitting, unsealed.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT hook garden hose directly to tank doing so will cause tank to explode resulting in damage..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.
ENGEL Coolers ENG-AP Lightweight Portable Live Bait 2 Speed Aerator Pump with 12V Powered Adapter for Coolers or Buckets, White
- ...oler weighs 5.5 lbs and can fit up to 32 12oz cans. It has an external size of 16.5 x 11 x 13 inches (L x W x H) and an internal size of 13.5 x 8 x 10 inches (L x W x H).
- LIVE BAIT COOLER DESIGN: Engel live bait coolers are designed with airtight EVA gasket seals, have all fittings secured with stainless steel screws, has water-resistant housing which protects the motor and suppresses noise, and has a non-absorbent surface that is stain and odor resistant.
- 5 YEAR WARRANTY: Engel guarantees complete satisfaction with their products. If there is anything wrong, we offer a 5 year/ 30 day pump warranty on our products.
mistcooling Patio Misting System - 160psi (12VDC-12 Nozzles Kit - W/Out Enclosure)
- Features: Base 10 Nozzle Kit Includes: - 1- 160 PSI Misting Pump - 12 – Brass/Stainless Steel Misting Nozzles - 12 – Push to Connect Black Color Misting Tees - 1 – Push to Connect Misting Elbow - 1 – Calcium Inhibitor Filter - 30 - ¼ Inch Black Clamps - 50 Feet of Black Tubing - 6 Ft Feed Line.
- Specs: - 160 PSI Mist Pump - 160psi Pump Quiet operation 35DB - self priming - max pressure 200psi pump - Available in 110 V, 220 V & 12 VDC - Thermal Safety Switch - Oil-less Pumps may generate heat, motor manufacturer have installed built-in thermal safety switch to improve the longevity of pumps I DON’T THINK THIS BELONGS WITH THIS PUMP - Standard pump inlet: 3/8 inch push lock Fitting. - Standard Pump outlet: ¼ inch Push lock fitting..
- Nozzles - Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24 inch thread - 0.012 inch Orifice - Rust-resistant fixed impeller pin - 0.014 GPM Flow per Nozzle.
- Fittings - ¼ inch OD - Push to Connect Fittings - Easily Re-Usable - Black Color Fittings - 10/24 Thread Size - Leak Proof Fittings.
- Tubing - ¼ inch OD Flexible PE Tubing - Max burst pressure is 300psi at 75°F - UV Resistant Flexible Tubing - Black Color - UV Treated. MC12020-MC12024.
ENGEL 13 Quart Insulated Leak Proof Minnow and Live Bait Fishing Cooler with 2 Speed Aerator, Pull Net, and Stainless-Steel Latches, Green (2 Pack)
- FEATURES: Engel live bait coolers are the ultimate portable and light weight coolers with a built-in aerator pump. It features a pull net which allows for easier access to bait, a 2- speed aerator pump which keeps the water fully aerated, and is completely stain and odor resistant.
- AERATOR PUMP: The 2- speed aerator pump can plug into your car or boat's cigarette lighter using a 12V adapter to run the pump overnight and keep bait fresh for the next morning..
- SIZE AND WEIGHT: This 13 quart Engel live bait cooler weighs 3.5 lbs and can fit up to 18 12oz cans. It has an external size of 15 x 10 x 11 inches (L x W x H) and an internal size of 12 x 7x 8.5 inches (L x W x H).
- LIVE BAIT COOLER DESIGN: Engel live bait coolers are designed with airtight EVA gasket seals, have all fittings secured with stainless steel screws, has water-resistant housing which protects the motor and suppresses noise, and has a non-absorbent surface that is stain and odor resistant.
- 5 YEAR WARRANTY: Engel guarantees complete satisfaction with their products. If there is anything wrong, we offer a 5 year/ 30 day pump warranty on our products.
RV Winterize Blowout Adapter, Blowout Adapter for Winterizing with 1/4 Inch Quick Connecting Plug and 3/4 Inch Garden Water Hose Threading, RV Winterizing Kit with Ball Valve for RV Boat Camper
- 42 Gallon Fresh Water Holding Tank Manufactured by Class A Customs - Made from NSF Approved Materials - Fresh & Drinking Water Safe WATER TANK MEASUREMENTS: 27.5” Longest Length (not including fittings) x 15.25” x 22.5 - Tank can sit on any side - rotate tank to change height or width Average Thickness 7/32” +/- Please view photos. (Due to the manufacturing process +/- .25" on each measurement).
- TANK BUILT-IN FITTINGS: (TWO) 1.5" Female NPT Fitting - fitting is sealed and watertight, to use remove membrane with razor knife (TWO) .5" Female NPT Fitting - fitting is open DO NOT over-tighten fitting damage will occur, use plastic connecting fittings as metal will damage threads.
- NON-PRESSURIZED TANK: tank must be vented allowing air in and out during use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
- BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” I....