Top 10w 40 Viscosity Reviews

Mobil 1 0W-40, Engine Oil, 1 qt.

Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Dropping Point: Not Specified ISO Viscosity Grade: Not Specified Temp. Range: - Item: Motor Oil SAE Grade: 0W-40 Viscosity Index: 186 Series: Mobil 1(TM) Base: Synthetic Size: 1 qt. Viscosity @ 100C: 13.5 Container Type: Bottle Viscosity @ 40C: 75 Pour Point: -54 Degrees C.
Flash Point: 230 Degrees C Country of Origin (subject to change): United States.

Check Stock

Valvoline, All Fleet Plus, 15W40, 1 Qt

Price For: Each Timken OK Load: Not Specified Four-Ball Wear: Not Specified Series: All-Fleet(R) Plus Item: Diesel Engine Oil Dropping Point: Not Specified Size: 1 qt. ISO Viscosity Grade: Not Specified Application: For Automotive Engines Including Turbo Charged, Lighttruck Gasoline Engines Requiring API Service Standards: All Products Meet API And SAE Standards Container Type: Bottle.
Base: Conventional Temp. Range: - SAE Grade: 15W-40 Color: Clear/Bright Viscosity @ 100C: 15.3 Viscosity @ 40C: 114.9 Pour Point: -30 Degrees C Flash Point: 230 Degrees C Viscosity Index: 139 Country of Origin (subject to change): United States.

Check Stock

Motul 107972 Set of 2 6100 SYN-nergy 5W-30 Motor Oil 5-Liter Bottles

Advanced Technosynthese lubricant for High Performance/Protection.
Specifically designed for powerful & recent cars fitted with Gasoline/Diesel engines/naturally aspirated/turbocharged/indirect/direct injection..
Suitable for all types of fuel: leaded/unleaded Gasoline/Ethanol/LPG/Diesel/Biofuel. // Compatible with catalytic converters..
Can be mixed with synthetic/mineral oils..
Viscosity Grade: SAE J 300/5W-30. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/71.2 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/11.8 mm²/s. // Viscosity HTHS at 150°C (302°F): ASTM D4741/3.5 mPa.s. // Viscosity Index: ASTM D2270. // Pour Point: ASTM D97/-38°C/-36°F. // Flash Point: ASTM D92/224°C/435°F. // Sulfated Ash: ASTM D874/1.1% Weight. // TBN: ASTM D2896/10.2 mg KOH/g..

Check Stock

Spectro Oil Spectro L.GSCGL80 Golden Gear Lube 80w 2-Cycle Trans Oil, 1 Liter

Designed to withstand Transmission punishment.
Exceptional clutch engagement and temperature stability.
Works on all modern 2 cycle moto-cross gear/clutch cases where SAE 10w30 or SAE10W40 SE/SF/SG or 80W Lubricants are recommended..
Exceeds all known manufacturers' warranty requirements and recommendations.

Check Stock

MYTOL Cordless Paint Sprayer, 2*20V 2.0Ah Batteries & 1 Charger, HVLP Electric Paint Sprayer Includes 3 Copper Nozzles & 3 Patterns, 800ml Container, 600W High Power Paint Sprayer for Home & Outdoors

【TWO BATTERIES INCLUDED】In contrast to the AC power cord, the cordless design makes you have no power cord restrictions. You can also work in places where there is no socket around. Two batteries will allow you to work entirely without worrying about running out of power..
【MAXIMUM VISCOSITY】The maximum paint viscosity our paint sprayer can spray is 50-60 DIN. We include a viscosity cup with the paint sprayer to help you ensure the paint viscosity. Fill the viscosity cup with paint. The paint does not need dilution if it can all pass through the viscosity cup within 20-40 seconds..
【PACKAGE CONTENTS】1* Paint Sprayer, 1* 800 ml Paint Container, 3*Size Nozzles, 1*Viscosity Cup , 1*Cleaning Brush, 1*Spanner, 2*2000mAH Battery,1*charger,1*User Manual..

Check Stock

ZBAITU A40 Laser Engraver, 80W Laser Engraving Cutting Machine, 10W Optical Power High Accuracy Lazer Engraver Cutter for Metal and Wood Acrylic Leather DIY, Logo Carving, Support LightBurn

【Overview】ZBAITU A40 laser engraver cutter has 80W machine power and 10W laser output power, with air assist nozzle, 0.08mm high accuracy diode, perfect for engraving metal, wood, leather glass etc, ZBAITU A40 laser engraving machine can also directly craft smooth stainless steel, meet your rich creative needs.
【Excellent Laser Module】Laser engraving cutting machine ZBAITU A40 is equipped with ZBAITU C80 laser module, real 10W laser output power greatly increase engraving and cutting speed.
Newest FAC process, the laser compression point is as tiny as 0.08mm, the finer engraving and cutting lines can be effectively reducing burn marks.
The upgraded air nozzle has stronger air flow will blow away scraps and smog, effectively reducing lens pollution.
【Solid Structure & Easy Installation】All metal frame design makes ZBAITU A40 laser engraving cutting machine more stable, reduce the vibration when working and improve the accuracy of engraving, with less noise and longer service life, A40 laser engraver cutter entire structure designed as quick assembly.
【Wide Compatibility】High power ZBAITU A40 laser engraver cutter perfectly compatible with various engraving software, such as LaserGRBL, LightBurn, support Win XP / Win 7 / Win 8 / Win 10,....

Check Stock

Valvoline Daily Protection SAE 5W-30 Synthetic Blend Motor Oil 5 QT (Packaging May Vary)

Designed for use in four-stroke marine engines.
Synthetic blend formulated to provide ultimate corrosion resistance and wear protection in high-rpm four-stroke outboard motors.
Offers industry-leading strength and viscosity retention to maintain peak engine performance and reliability.

Check Stock

Motul 105776 Set of 4 Dexron III Automatic Transmission Fluid 1-Liter Bottles

For use in all systems where DEXRON or MERCON standard is required. // For automatic gearboxes/torque converters/power steering systems/boat reversing gears/hydrostatic transmissions/hydraulic or mechanical systems that require DEXRON or MERCON standards..
MOTUL DEXRON III can be used (and mixed) for applications where DEXRON/B DEXRON/DEXRON II D/DEXRON IIE/DEXRON III is required..
Technosynthese ATF features more fluid at low temperature than Dexron IIE oils, which allows easier gear change in cold weather..
Higher oxidation resistance than Dexron IIE standard. // Oil film stability under high temperature. // Anti-wear, Anti-corrosion, Anti-foam..
Color: Red. // Density at 20°C (68°F): ASTM D1298. // Viscosity at 40°C (104°F): ASTM D445/33.4 mm²/s. // Viscosity at 100°C (212°F): ASTM D445/7.2 mm²/s. // Viscosity Index: ASTM D2270. // Flash Point: ASTM D92/204°C/399°F. // Pour Point: ASTM D97/-48°C/-54°F..

Check Stock

Krytox GPL 206 Grease PFPE/PTFE 0.5 oz Syringe

Temp Range -51C thru 179C Viscosity 9cSt/100C 60cSt/40C Stable in a wide variety of operating conditions/environments.
Nonflammable Krypto Grease contains only carbon oxygen & fluorine (no hydrogen or silicone) Will not burn or support combustion Passes impact....
Chemically Inert Resistant to oxygen and inert to most all chemicals Inert nature allows Krypto Grease to outlast/outperform hydrocarbon products....
At operating temps and pressures Krypto Grease is highly resistant to attack by gaseous and liquid oxygen The preferred choice in oxygen use and....
Exposure to significant radiation causes only minor DE polymerization (8% decrease of viscosity) and no formation of solids or sludge or change in....

Check Stock

Krytox GPL 206 Grease Pure PFPE/PTFE 8 oz Tube

Temp Range: -36C thru 260C: Viscosity 25cSt/100C, 240cSt/40C.
Stable in a wide variety of operating conditions/environments.
Nonflammable: Krytox Grease contains only carbon, oxygen & fluorine, (no hydrogen or silicone).
Chemically Inert: Resistant to oxygen and inert to most all chemicals.
Inert nature allows Krytox Grease to outlast/outperform hydrocarbon products.
At operating temps and pressures Krytox Grease is highly resistant to attack by gaseous and liquid oxygen.
Exposure to significant radiation causes only minor DE polymerization (8% decrease of viscosity) and no formation of solids or sludge or change in....

Check Stock

Dasunny DC 12V to DC 19V Converter Voltage Regulator 6A Step-up Power Supply Circuit Module Adapter for Auto Car Truck Vehicle Boat Solar System Electric Motor, WG-12S1906

【40Wh Output】10W Monocrystalline solar cell can generate 40Wh per day (under 4 hours full sunshine). Perfect for 12v battery charging. Can be used in 12v battery, gate opener,led lights and other scenes.
【Portable Size】The dimensions of panel is 13.3x8.1x0.7 inches, the length of extension cable is 3.28ft. The extension cable is long enough for you to connect the charge controller or 12V load. And you can carry the compact 10W solar panel with you easily.
【Product Details】Waterproof Junction Box, corrosion-resistant aluminum frame for extended outdoor use, allowing the solar panel to last for decades as well as withstand high winds (2400Pa) and snow loads (5400Pa).
【Easy Installation】Pre-drilled holes on the back of the panel for fast mounting and securing.
【Warranty】1-year warranty. Please feel free to contact us through Amazon for any questions..

Check Stock

EDSRDXS UV Bonding & Welding Glue Kit UV Super Bonding Soft & Hard Glue with Black Light, Quick-Drying for Bonding Glass, Metal, Plastic 2 Pack Each 0.7oz (20ml x 2pack)

LIQUID PLASTIC BONDING KIT：EDSRDXS UV bonding glue contains two selected bonding function UV glue (soft & hard), each of which is 0.7 oz, 20ml. It is a low-viscosity, high-strength and UV-curable modified acrylate adhesive..
UV super bonding soft glue can still maintain a certain degree of toughness (can maintain a small degree of bending) after bonding. It is specially used for laminating PC, PMMA, PET, PS (excluding PP), and is also suitable for laminating plastic, glass, and metal. combine. UV super viscous hand feeling glue has a viscosity of 450-550 CPS and is a colorless transparent liquid. It can withstand extreme temperatures from -22°F to 275°F (-30°C to 135°C). Under pen light, it cures within 30-40 seconds and remains transparent, never yellowing..
UV super bonding hard glue is transparent light yellow liquid, excellent for bonding between glass and metal, glass and glass. It has a special engineering viscosity of 300 to 400 CPS, which provides better adhesion on relatively narrow fracture surfaces. This glue can work at extreme temperatures ranging from -40°F to 194°F (-40°C to 90°C). It can be cured within 60s under the irradiation of....

Check Stock

3M Scotch-Weld Urethane Adhesive 3535, Off-White, Part B/A, 2 fl oz kit

3M 590 Polyurethane Glass Adhesive Sealant is a one-part, high-viscosity polyurethane sealant intended for use in structural glass bonding and window glazing applications in automobiles..
The high-viscosity formula was specifically designed to meet the unique demands of structural glass bonding. It maintains flexibility after being cured, is crack resistant, and expands/contracts with the surrounding temperature, resulting in a bond that is long-lasting and is resistant to the elements and vibration fatigue..
A 25 to 40 minute skin time provides ample opportunity to complete installation and a 3-hour drive away time will ensure unnecessary space isn’t taken up in your shop by completed projects..
The versatile formula can also be used to bond a variety of substrates such as glass, acrylic, polycarbonate, and many more materials. Perfect for applications such as structural windshield installations, PMMA windshield applications, hard-to-bond polycarbonates/acrylics, and installing flush mounted glass for marine or automotive use..
Drive-Away Time: 3 hours. Skin Time: 25 to 40 minutes. Requires a manual or pneumatic applicator for use..

Check Stock