Top 10an To 8an Reducer Reviews

PQY 16 Row AN10-10AN Stacked Plate Oil Cooler 6AN 8AN Adapter Universal Engine Transmission Aluminium Alloy

  • For Universal Fitment. May require some modifications to fit certain vehicles.For modified street vehicles which are driven hardly with racing track use..
  • 16 row oil cooler reduces coolant temperature and extend engine life..
  • Cool down engine oil, transmission and rear-differentials like a radiator.Keep the oil temperature low to prevent damage, or even seizure of the engine.Improve lubrication and power performance. Maintain oil viscosity. Save fuel..
  • Can used to connect the 8AN / 6AN braided fuel line hose end. Inlet / Outlet Size: AN-10.
  • Package include:1x 16Row Stacked Plate 10AN Oil Cooler,2x 10AN Female to 8AN Male Fitting Adapter,2x 10AN Female to 6AN Male Fitting Adapter.
Check Stock

Derale 13950 Atomic-Cool Remote Cooler , Black

  • Universal:universal oil cooler,you may need to do some custom modifications and require other hardware to meet your needs.Please measure before purchase to make sure there is enough space for installation..
  • Installation location:choose a place with good and cold air through the oil cooler kit for installation.Instruction included..
  • Function:keep oil temperature low, help to improve the lubricating effect of engine oil, prevent parts damage ,or even seizure of the engine.Usable to cool down engine oil,transmission, and rear-differentials.Besides,this stacked-plate oil cooler design smaller and lightweight suitable for narrow space..
  • Size:10AN 30Row oil cooler,oil capacity:0.74L.Test pressure: 116psi,burst pressure:232psi.Material:aluminium alloy..
  • Package Include:1pc 30row engine oil cooler.2pcs 10an female to 8an male fittings,2pcs 10an female to 6an male fittings.Can be used to connect 8AN / 6AN braided fuel line hose ends..
Check Stock

TurboWerx Ultra High-Performance Turbo Oil Electric Scavenge Pump 12V

  • 350F (175C) Fluid Temperature, 2-3GPM Scavenge Pump Rate depending on oil temperature/viscosity, 50+ PSI continuous as Pressure Pump , Hardened Bronze Gear Pump Rotors.
  • 10,000 Hour Rated Dual Hybrid Ball Bearings, 10,000 Hour Rated Over-sized Brushes.
  • Highest Rated Temperature (class H or higher) Insulated Copper Motor Windings, Set of two 3/8” NPT -> AN Nickel-plated Adapters Included - Options are -6AN, -8AN, or -10AN Sizes - if size preference not specified at order time, -8AN supplied..
  • Warrant void if 350F (175C) rated temperature is exceeded, For 100% compatibility with 16-18V set-ups on race vehicles, choose the 24V Exa-Pump.
Check Stock

EVIL ENERGY 8AN Fuel Line Kit, Nylon Braided Fuel Hose CPE 10FT Black(7/16'ID)

  • Hose ID: 7/16". Hose OD: 0.642inch.Length: 10feet..
  • Made of CPE synthetic rubber and nylon braided..
  • Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
  • Package includes: 6pcs 8an swivel hose ends (2pcs straight, 2pcs 45degree, 2pcs 90degree) and 8an nylon braided fuel line..
  • EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message.(Professional installation is highly recommended.).
Check Stock

SINTLY 8AN 90 Degree PTFE Hose End AN8 for PTFE E85 Fuel Line Fitting Adapter Blue&Red 2 PCS

  • 【Tips】8AN PTFE hose end can be work with PTFE fuel line ONLY.It can NOT be installed on braided CPE fuel line..
  • 【Size】Thread Size of 8AN PTFE Fitting 90 Degree is 3/4-16UNF and the PTFE fuel line which works with should be 1/2"..
  • 【Included】2 PCS x PTFE 8AN Fitting 90 Degree.
  • 【Attention】100% product quality assurance. Please feel free to contact us, if you are dissatisfied with the product you received or have quality problems..
  • SINTLY Provide plently kind of fuel fittings, swivel, push-on lock, PTFE hose end and other fitting adapters..
Check Stock

EVIL ENERGY Female AN10 to Male AN8 Flare Reducer Hose Fitting Adapter Black

  • These reducer adapter hose fittings are designed to quickly make converting female connection to male. Designed for smooth flow that gives better....
  • Multi Sizes Supplied:Available in 5 sizes : Female AN6 to Male AN4 ， Female AN8 to Male AN6 ， Female AN10 to Male AN6 ， Female AN10 to Male AN8....
  • APPLICATION- EVIL ENERGY Flare Reducer Hose Fitting is widely used in Oil/ Fuel/ Water/ Fluid/ Airline etc..
  • The hose reducer fittings are made of high-quality aluminum alloy material for strong strength. Anodised and hand polished finish add the final touch....
  • ENVIRONMENTAL FRIENDLY- Flare Reducer Fitting can be reused and recycle if you do not want them to stay in the original place. Due to the high-quality....
Check Stock

8AN Fuel Line Kit 16FT with Fittings Nylon Braided 1/2' 16 ft CPE Fuel Oil Hose - Not for PTFE E85

  • Application: Universal fuel line hose, Such as fuel, lube, alcohol, ethanol, coolant, and air for automobiles or marine engines, most suitable for racing cars & motor racing bikes..
  • Reliable Material: The fuel line hose based on high-quality stainless steel, aluminum alloy and nylon, it has excellent flexibility and wear resistance. The outer nylon braid has excellent flame resistance and is safe to use..
  • The fuel line hose Maximum Working Pressure of Braided Steel Fuel Hose (psi): 500 psi. Bursting pressure (psi): 2000psi. Operating temperature range: -40°F to 257°F (-40°C to 129°C). Before buying, make sure that the pressure and temperature range are suitable for your application..
  • Package Includes: 10pcs 8an rotating hose ends (4 straight, 2pcs 45 degrees, 2pcs 90 degrees, 2pcs180 degrees),2pcs 8an hose separator clamp,1pcs gloves,1/2 braided fuel pipes (length: 16 feet). Hose ID: 0.44 inch (11.13 mm). The outer diameter of the hose: 0.67 inches (17.02 mm)..
  • Perfect Replacement: Fuel line hose, reliable material can safely replace the original parts, covered with high-quality braided nylon, enhance flexibility and provide a cool racing appearance.
Check Stock

8AN to 10AN Fitting - ORB O-ring to Flare Straight Male Adapter

  • ORB O-ring to Flare - Male Straight adapter.
  • Black Anodized - Solid Quality Fitting - Designed for High Flow.
  • Suitable For Oil Fuel Coolant Water Air Gas - E85 Compatible.
Check Stock

UPR 6pc Combo Angled Wrench Set 4an to 16an 7075 Strong as Steel. (Not weak Like 6061)

  • Black Anodized Finish with Laser engraving.
  • Laser Engraved for Super Easy Wrench Identification.
  • Wrench Sizes: 4an, 6an, 8an, 10an, 12an, 16an Wrench Sizes.
  • CNC Machined 7075 Aluminum to Ensure they are the Strongest and Best AN Wrench Set Available.
Check Stock

UPR Aluminum 7pc an Wrench Set 3an to 20an 7075 Strong as Steel (Not weak Like 6061)

  • Black Anodized Finish with Laser engraving.
  • Laser Engraved for Super Easy Wrench Identification.
  • Wrench Sizes: 3an, 4an, 6an, 8an, 10an, 12an, 16an, 20an Wrench Sizes.
  • CNC Machined 7075 Aluminum to Ensure they are the Strongest and Best AN Wrench Set Available.
Check Stock

8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black

  • 8AN 20FT Fuel line Hose Braided Nylon Stainless Steel Oil Gas CPE Black.
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi. AN-8 nylon and stainless steel braided high pressure PTFE fuel line kit holds up a lot stronger to heat and extreme circumstances..
  • Hose Material: Covered with high quality woven Nylon and Stainless Steel Braided + CPE Synthetic Rubber to enhance flexibility and give a cool racing appearance.
  • The fitting is made of T6061 Aluminum, anodized finish for high strength and good durability..
  • PTFE Lined Hose can be compatible with all automotive fuels, lubricants, and coolant..
  • Package Includes: 1 x 8AN 20FT Nylon Braided Hose. It can't be bend and folding in half. Professional Installer is Highly Recommended. Exchange or return for free if leak..
Check Stock

Podavelle 10AN Female to 8AN Male Flare Reducer Fitting Adapter Aluminum Black

  • Size: 10AN (7/8-14 UNF) female to 8AN (3/4-16 UNF) Male.
  • Manufactured from lightweight 6061-T6 aluminum.
  • Anodized finish for strength, durability and corrosion resistance.
  • 37° sealing angle guarantees a positive seal at maximum operating pressure.
  • Application - Universal, fits all oil/ fuel/ water/ fluid/ air line, etc.
Check Stock

EVIL ENERGY 8AN PTFE Fuel Line Kit,AN8 E85 Nylon Braided Fuel Hose 16FT(0.394Inch ID)

  • ID: 13/32". OD: 0.543inch.Length: 16 feet. Please measure before purchase! (Includes: as shown in the picture.).
  • Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Max working pressure: 2500psi. Bursting pressure: 8000psi.AN8 ptfe fuel line fitting kit is ideal for high temperature and high pressure applications..
  • Applicable Medium:8AN e85 fuel line works with all automotive fuels, lubricants, and coolants..
  • -8 ptfe nylon braided fuel line relatively hard,it can't be bend and folding in half. Professional installation is highly recommended..
  • EVIL ENERGY provide 8an PTFE fuel hose fitting kit 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..
Check Stock