Top 10an Female To 6an Male Reviews

EVIL ENERGY 6AN Female to 3/8 Push on Hose Barb Fitting Adapter Straight Swivel Aluminum Alloy Black

Female 6AN to 3/8 inch push on hose barb connector is made of aluminum alloy 6061-T6 for the transition from pipe threaded connector to hose ,which is....
-6AN thread size is 9/16 UNF, used for 6AN male thread fitting.
The barb can use in 3/8" inner diameter fuel hose..
Simple installation - Female thread adapter: only need to tighten the thread.barb adapter: put the hose over the barb and use a hose clamp to tighten....
Note：Barbed style fittings are limited to relatively low pressures(usually below 4000 psi)due to the limitations of the soft and flexible....
EVIL ENERGY provide this product have 3-month warranty.Please contact us first if you have any doubts after receiving the product..

Check Stock

EVIL ENERGY 6AN Female to 6AN Male Flare 90 Degree Swivel Hose Fitting Adapter Aluminium Anodized Black

Female to Male Swivel Fitting Size: female AN6 to male AN6 (9/16-18 UNF) thread pipe connectors, 90 degree elbow flare union..
Advantage: the swivel 360° elbow design allows you to get things reasonable tight while still maintaining the swivel functionality so that you can ensure a proper connection and positioning before doing that final tightening down to lock everything into position.The swivel fitting has 37-degree "AN" sealing angle design assures leak free performance..
The 6an swivel fitting can be used with fuel, oil, gas, fluid, Water..
The female/male swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for great appearance and anti-corrosion, superior thread strength. Max Pressure: 1000psi. Working Temperature Range: -65℉ to 252℉ （-53℃ to 122℃). Can be suitable for competition applications where reduced weight is needed..
The AN adjustable wrench is highly recommended. Six-month warranty provide by EVIL ENERGY .We value your shopping experience and strive to offer a high-quality product and service..

Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect male, 1pc 6AN to 5/16" hose adapter fitting..
5.Professional installation recommended: PTFE hose relatively hard, it can't be bend and folding in half. Nylon and stainless steel braid for excellent flexibility and resistance to abrasion. Outer nylon braided has excellent inflaming and safer to use..

Check Stock

EVIL ENERGY 6AN Straight Push Lock Hose Fitting End Black

Size: 6an female to 3/8" barb, and that of 6an thread size is 9/16-18UNF..
Material: made of aluminum alloy, reusable and recyclable..
Max pressure: 2000PSI, temperature range: -40℉ to 248℉..
Please attention that an6 push lock hose barb only compatible with rubber fuel line..
EVIL ENERGY provide 3 angles of 6an hose barb: straight, 45degree, 90degree..

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....

Check Stock

EVIL ENERGY Female AN10 to Male AN8 Flare Reducer Hose Fitting Adapter Black

These reducer adapter hose fittings are designed to quickly make converting female connection to male. Designed for smooth flow that gives better....
Multi Sizes Supplied:Available in 5 sizes : Female AN6 to Male AN4 ， Female AN8 to Male AN6 ， Female AN10 to Male AN6 ， Female AN10 to Male AN8....
APPLICATION- EVIL ENERGY Flare Reducer Hose Fitting is widely used in Oil/ Fuel/ Water/ Fluid/ Airline etc..
The hose reducer fittings are made of high-quality aluminum alloy material for strong strength. Anodised and hand polished finish add the final touch....
ENVIRONMENTAL FRIENDLY- Flare Reducer Fitting can be reused and recycle if you do not want them to stay in the original place. Due to the high-quality....

Check Stock

SINTLY 3/8\ NPT to 6AN Flare Male AN6 Straight Fitting Union Flare Adapter Aluminum Black 2Pcs

【Tips】To obtain a proper seal in the NPT joint, you need to use a sealant compound or PTFE tape. The thread is sealed by wedging. The NPT connection cannot be reused. When accessories are reused, this can cause wear or increase the possibility of leakage..
【37 Degree Flare Fitting Taper】：The 6an male flare to 3/8" NPT fitting has one male side AN is a 37-degree flare fitting taper and the other male side NPT is a 60 degree tapered threads. These adapter hose fittings are designed to quickly make professional 37° AN connections from NPT tapered pipe threads. Designed for smooth flow that gives better fluid flow, tight security, and leaks free.
【Application】-6AN to 3/8" NPT straight flare to pipe adapter is widely used in kinds of liquids, oil, Water, Air, Fuel lines, E85, gas, etc. Bulkhead Fitting is perfect to apply in automotive, industrial, boat/marine, etc. The male flare fitting fit all oil cooler / fuel tank / fuel pump/fluid Line/turbo..
【Material ＆ Features】Made of High-Performance Lightweight 6061-T6 Billet Aluminum Material. All threads are designed for the maximum percentage of engagement. One side is AN standard and the other is NPT National Pipe Taper Thread. Each straight fitting is completed with a black anodized fini....

Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

...obtain even more uniform fuel pressure. Mounting bracket and rubber insulator are included to make installation a breeze..
Package Included: 1pcs fuel filter/regulator, 1pcs 3/8'' EFI push on lock fitting for inlet, 1pcs 5/16'' EFI push on lock fitting for return, 1pcs 6AN male to 3/8 male push on EFI fitting for outlet..

Check Stock

Derale 13401 Series 10000 Stacked Plate Transmission Oil Cooler 10 Row Black

Built in turbulators agitate fluid for maximum heat transfer.
Sturdy furnace brazed all aluminum construction tested to 250 p.s.i..
Male -6AN aluminum O-ring inlet fittings and 3/8 inch hose barb adapters included.

Check Stock

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

6AN female swivel to 3/8 barb fitting 45 Degree.
Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..

Check Stock

onelinkmore RF Coaxial Connector Kit SMA to N BNC TNC F Type Connectors Kits N to SMA BNC to SMA TNC to SMA RF Adapter SMA Cable Connector Male to Female Coax Adapters 20 Type SMA Kits

N Type to SMA Series: 1. N female to SMA female, 2. N female to SMA male, 3. N female to SMA female panel mount, 4. N male to SMA male, 5. N female to....
BNC to SMA Series: 7. BNC male to SMA male, 8. BNC male to SMA female, 9. BNC female to SMA male, 10. BNC female to SMA female.
N Type to RP SMA Series: 11. N female to RP SMA male, 12. N female to RP SMA female, 13. N male to RP SMA male, 14. N male to RP SMA female.
Other Series: 15. N male to BNC male, 16. N male to BNC female connector, 17. N female to N female, 18. N male to F female, 19. BNC male to F female,....
Package Content :SMA RF Adapter Kit 20 Type Adapter N Type to SMA BNC to SMA TNC to SMA to F RF Connectors Adapter.

Check Stock

EVIL ENERGY 6AN Fuel Line Kit, -6 Nylon Braided Fuel Line Hose Fitting Kit CPE 20FT Black(0.34inch ID)

6an braided fuel line kit widely used as transmission oil cooler line, fuel return line, fuel supply line, coolant fluid hose, fuel gauges line, vacuum line, turbo cooler line, oil feed line..
Nylon and stainless steel braided fuel hose kit can be compatible with transmission fluid, oil, race gas, vacuum, hydraulic fluid, diesel and fuel..
Maximum Working Pressure: 500psi. Bursting Pressure: 2000psi. Temperature Range: -40℉ to 257℉..
Package includes: 10pcs 6an swivel hose ends (4pcs straight, 2pcs 45degree, 2pcs 90degree, 2pcs 180degree), 2pcs 6an hose separator clamp and 6an braided fuel line (Length: 20 Feet). Hose ID: 0.34". Hose OD: 0.543inch..
EVIL ENERGY provide this product 3-month warranty. Any problem you might have, please feel free to contact us via Amazon message..

Check Stock

8AN to 6AN 6 AN Male Y Block Fuel Pump Fitting Adapter Aluminum 8 AN to 2 x 6AN 9/16-18 Male Flare Thread Y Tube Connector Black

JIC -8 AN male to AN6 x 6AN 9/16"-18 thread flare Y block adaptor reducing fittings, black anodized finish.
One-piece design is compact and lightweight, high flow capacity, Y-Blocks feature A/N Style Male inlets and outlets.
Hard anodized coating is compatible with alcohol, exotic fuel-additives, water and oil.
This eliminates leaks due to poor solder joints or leaky O-rings due to CNC manufacturing process, 8 AN Male to AN6 *2 Male Coupling Union Adaptor.
Made of one-piece lightweight 6061-T6 billet aluminium.

Check Stock