Top 1 Inch J bolts Reviews

Cables Direct Online Adjustable Outdoor Roof TV Antenna Mount J Pole Solid Base Tripod Weather Proof

  • Our Tripod is made of solid steel,heavy-duty and is user-friendly. You can mount your antenna with it on the wall, on the roof or on your balcony..
  • Adjustable direction, The mounting pole can be rotated 60 degrees for best reception angle to get strongest signals.
  • Easy installation, Comes with all the screws and plastic anchors, super easy to assemble..
  • Perfect for wall or roof mount - This black-coated steel J-mount ensures a secure installation.
  • 18 Inch mount- maximum diameter 1 Inch - Maximum acceptance weigh 66LBS.
  • Weather Proof - can be installed outside or in the attic and has a black-coating to blend with its environment..
  • Package Includes - 1 x J-Pole Aerial Bracket, 1x Base, 4 x Wall Screw, 4 x Bolt, 2x Cap.
Check Stock

Titan Fitness T-2 Series Power Rack 83-inches High J-Hooks Single Pull-Up Bar

  • T-2 Series 2 x 2-inch 12-Gauge Steel Uprights.
  • 1-inch holes spaced 2-inches on the center.
  • Included: (4) heavy-duty steel uprights, (2) Pin and Pipe Safeties, (2) Weight Plate Horns, (2) J-Hooks with UHMW plastic, 1.25-inch Single Pull-Up....
Check Stock

Titan Fitness T-3 Series 92-inch Squat Stand 1,000 LB Capacity Tall Squat Rack with Reinforced J-Hooks

  • TALL SQUAT STAND: Featuring (2) 91-inch laser-cut steel uprights with Westside hole spacing through the bench and clean pull zone, 2-inch spacing....
  • INCLUDED STANDARD J-HOOKS: Our standard, default J-Hook features UHMW plastic core on the backside and the clasp to protect the bar's knurling and the....
  • STANDARD PULL-UP BAR: Our standard, default front crossmember is the T-3 Series Single Pull-Up Bar with a 1.25-inch diameter. This bolt-on bar....
  • DESIGNED SAFE. DESIGNED STRONG.: You are never more vulnerable as an athlete than when you are working out heavy, let alone maxing out. Our T-3 Series....
  • HARDWARE INCLUDED: Each unit comes with all the hardware you need to assemble your T-3 Series Tall Squat Stand. For safety reasons, Titan recommends a....
Check Stock

LotFancy Adjustable Battery Hold Down, Universal Battery Bracket with J Hook, Battery Tie Down Kit, 9.1inch (23cm) Bolt Length

  • Adjustable: Bolt length: 9.1inch (23cm). 3.74inch long thread for height adjustment. Adjustable cross-bar expands from 5.7" to 8.5" wide. Thread size: 1/4"-20 UNC. Please confirm your battery size before purchasing.
  • High Quality: This car battery hold down is made of premium iron, sturdy and available for long service life. The surface is anodized for enhancing its corrosion and rust resistance.
  • J Hook: Compared with other’s L hook, our J hook can hold down battery more securely. It won’t slide out of the tray easily.
  • Easy to Install: Adjust the width and height according to the size of the battery, hook the J hook into the hole on the tray, tighten the wing nut screws to ensure a firm grip on the battery. The battery holder provides steady holding for the battery.
  • For Most Battery Size: This adjustable battery holder can be used for group 21，21R，22F, 22R, 24, 25, 26, 26R, 27, 31, 33, 34, 34R, 35, 36R, 41, 42, 43, 46, 47, 48, 49, 65, 78, 94R Batteries and most group size batteries.
Check Stock

ARONOVA Battery Hold Down Sets,With Billet Aluminum Battery Tie Down Bracket And 18-8(304) Stainless Steel J bolts(Red, 8 inch bolts)

  • Premium 6061 aluminum crossbar & 18-8 Stainless steel j bolt sets..
  • Designed for batteries 6.89" (175mm) wide or slightly narrower..
  • Tie down bracket overall length - 8.58" (218mm),bolt center to bolt center length - 7.48" (190mm).Available in 8/10 inch j hooks.
  • Exclusive Finishment: Dual surface treatment, Eliminate the mill marks and burrs of CNC machining,and the bracket is sand-blasted and anodized for an elevated, frosted texture..
  • Usually fits most group 21, 21R,22F,22HF,22R, 24, 24F, 24H, 24R, 24T, 25, 26, 26R, 26/70 27, 27F, 27H, 28, 29H, 30H, 31, 31A, 31T, 33, 34, 34R, 34/78, 35, 40R, 41, 42, 43, 46, 47, H6(48), H8(49), 85, 86, 90, 91, 92, 93, 94R,95R, 96R,97R, 98R, 99, 124, and 140R batteries.(Tips: this tie down will NOT fit between raised vent caps on the surface of some batteries).
Check Stock

ALEKO Small J-Bolt Hinge for Doors and Driveway Gates - 1/2 Inch - LM113

  • Our j-bolt hinge is the perfect complement to your door or swinging gate.
  • The hinge pivots on an adjustable steel ball bearing and includes a grease fitting which keeps the bearing lubricated.
  • Made for ALEKO brand iron doors and galvanized steel driveway gates, but will work anywhere you need a strong and reliable hinge.
  • Comes with all necessary fixings, including (2) bolts, (2) nuts, and (2) washers.
  • For a more in-depth breakdown of dimensions see product images.
Check Stock

Homax 80099 No-Sag EasyGate Bracket Kit

  • Steel 5/8" J-Bolt Adjustable Barrel hinges provide full range of swing for gates and doors. The length of the threaded arm measures 4.3". Welding plates are 0.25" thick, and the barrels are 1"..
  • These heavy duty hinges are just what you need to hang doors and gates where you require full range of motion. Made of high quality steel with a black powder coating. Comes with all necessary hardware, no need for extra pieces, like springs. These J-hook style hinges are heavy duty, and excellent for gate hinges hardware, door hinges, chain link fence parts, swing gate openers, blast gates, driveway gates, and even as gate latches for metal gates, in general..
  • To Install - Weld the flat backing plate to the mounting post. If not already available, drill a hole through the gate frame big enough for the threaded bolt. Pass the bolt through, and secure with nuts. Hinges must be mounted with the thread arm at the top. If mounted upside down, the gate will fall..
  • Minimum distance between post and gate should be 1.5.
Check Stock

US Motors AST125 Nidec Replacement Swimming Pool Pump Motor

  • Replacement 1.25 Total Horsepower (THP) swimming pool pump motor.
  • Standard 56J-Frame, C-Flange motor with threaded shaft.
  • Features four 3/8-Inch threaded bolt-holes at 1, 5, 7 and 11 o’clock.
  • Designed to replace a 1-HP Up-Rated or 3/4-HP Full-Rated motor and compatible with 115/230 volts.
  • Fits a wide variety of pool pumps including American Products, Pentair, Astral, Hayward, Jacuzzi and Jandy.
Check Stock

D&D Technologies TCHDMA1 Multi-Adjust Heavy Duty Gate Hinges, for Self Closing Wood and Vinyl Gates up to 132 Pounds, 3-Way Adjustable, Gap up to 1 3/8", Black, 2 Count

  • 900LB Capacity per hinge - Ball Bearing With Grease Zerk Fitting LISTING IS FOR 2X COMPLETE GATE HINGE SET.
  • The hinges are precision machined from high strength, solid cold roll steel bar. They are fitted with ball bearing for extra smooth easy operation..
  • Unlike ordinary hinges that will seize up fail to work due to age and weather conditions, these will always operate like new. Zerk fitting for adding grease makes for hinges that will last a very long!.
  • SPECIFICATIONS: -Weight capacity per hinge: 900 lbs -Hardened, heat treated cold rolled steel. -Precision Machined -Ball Bearing -Zerk fitting for greasing -Welding Tabs -J Bolt length is 7-1/4" -3/4" J-Bolt with Zinc Plated Nuts and Washers -Barrel is 4-5/8" by 1-9/16" -Powder coated.
  • Includes: -2x Heavy Duty Steel Hinge Set - 3/4" J-Bolt style with weld tabs - Ball bearing and zerk fitting for grease.
Check Stock

Ajustable Battery Hold Down with Stainless J bolt Kit,A Specialty Automotive Tools Car Battery Holder of Car SUV Truck RV Camper and Trailer (11inch/27cm bolts)

  • ...work less difficult. Holds the battery securely, eliminating the safety hazards and dangers of a poorly secured battery while driving..
  • 【Buyer's guide】: Before choosing our heavy duty battery holder, measure your battery in the following fitment ranges. Width 5.7-8inch,Length 1:4.9-10inch/Length 2:3.74-8inch/Length 3:6.5-11inch.Please choose the right holder according to your car battery size before purchasing..
  • 【Save on maintenance costs】:These battery mounts with bolts and J-bar are very easy to install and use easily, even if you're not a professional mechanic and like to fix your own car, this is definitely a smart choice! Instead of going to the garage,do-it-yourself repairs save you from expensive repairs..
  • 【100% satisfaction experience】: If you have any questions about the product, please send an email to our customer service, we offer a perfect service 24 hours a day. If the item is defective in any way, we are willing to send you a new one or give you a full refund to provide you with the most satisfactory product and service, thank you for your support!.
Check Stock

DC66-00777A Washer Pulsator Cap Replacement Part by Blue Stars - Exact Fit for Samsung Washers - Replaces 3282678 5788799 AP5788799

  • ✅ MODEL NUMBER: DC66-00777A Washer Pulsator Cap..
  • ✅ EASY TO INSTALL: It is made exactly fit for the most top name brand (Samsung) and replaces part numbers: 3282678, 5788799, AP5788799, PS8753312..
  • ✅ FIT MODELS: WA45H7000AP, WA45H7000AW, WA45H7200AP, WA45H7200AW, WA48H7400AP, WA48H7400AW, WA48J7700AW, WA48J7770AP, WA48J7770AW, WA50F9A6DSW, WA50F9A7DSP, WA50F9A7DSW, WA50F9A8DSP, WA50F9A8DSW, WA52J8060AW, WA52J8700AP, WA52J8700AW, WA52J8705MP, WA52J8705MP/A20000, WA52J8705MP/A2 0000, WA52J8707MP, WA52J8707MP/A20000, WA52J8707MP/A2 0000..
  • ✅ PREMIUM QUALITY: The replacement part is made from durable high-quality material and well-tested by the manufacturer - Meets OEM standards - Ensure long-lasting and effective performance. It fits over the wash plate mounting bolt to protect the bolt and prevent clothing from catching on the washplate. Easy to install, no tools required. Unplug the washer before installing this part. Wear work gloves to protect your hands..
  • ✅ MONEY-BACK GUARANTEE: For any reason, you're not completely satisfied, you can ask for a replacement or full refund, no questions asked..
Check Stock

Stanley Proto J6006RK 3/8' Drive Ratchet Head Repair Kit - Torque Wrench

  • 1/4-inch to 1-inch ratchet wheels made from alloy steel for uncompromising strength and durability.
  • Field repair your torque wrench ratchet head easily with the corresponding repair kit.
  • Use with: J6006C, J6006CX, J6006CXCERT, J6006MC, J6006NMC, J6012C, J6066C, J6066CX, J6066CXCERT, Made in USA.
Check Stock

Stanley Proto J6014RK 1/2' Drive Ratchet Head Repair Kit - Torque Wrench

  • 1/4-inch to 1-inch ratchet wheels made from alloy steel for uncompromising strength and durability.
  • Field repair your torque wrench ratchet head easily with the corresponding repair kit.
  • Use with: J6014C, J6014CX, J6014CXCERT, J6014MC, 6014NMC, J6016C, J6016CX, J6016CXCERT, J6016MC, J6016NMC, J6068C, J6072C, J6072CX, J6072CXCERT.
Check Stock