Top 1 4 Inch Shank Carbide Burrs Reviews

aTourer Tungsten Carbide Burr Set Rotary File Rasp 1/8 & 1/4 Cutting Head Die Grinder Milling Bit 20pcs Single Burr Double Cut 20pcs

【Advanced Carbide Material】The rotary burrs are made of Tungsten Carbide, which is sharp and sturdy. And the hardness can reach to HRC70. The durability of carbide burr is 10 times higher than high speed steel cutter (HSS cutter). 200 times more than the small wheel durability. Comprehensive processing costs can be reduced by about 10 times..
【Double Cut or Single Cut】Double cut burr have more cutting edges and could remove material much faster. It is more suitable for relatively low density materials such as wood, plastic, aluminum, soft steel and all non-metal materials. Single cut burr provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. It is more suitable for relatively high density materials such as iron, alloy steel, stainless steel etc..
【Professsion 20 PCS Set】The carving bits include A, C, D, E, F, G, H, L, M and N type burrs. There are 2 sizes for each type burrs, which is 1/8 shank 1/8 head diameter and 1/8 shank 1/4 head diameter. They are suitable for almost everything you need for engraving, cutting, shaping, grinding, polishing and removing sharp edges..
【Easy to Use】 If the cutting bits are chipping easily this could be due to the speed ....

Check Stock

TJATSE 5Pcs 1/4 Inch Aluma Cut Carbide Burr Set 4.4 Long Shank Single Cut Tungsten Rotary Burr Files CNC Engraving Cut Metal Carving Polishing Drilling Tool Kits

【ALUMINUM CUT CARBIDE BURRS】: This set included 5pcs NF carbide rotary burr, standard aluma cut head with 1/4" shank, 3/8" head diameter, 3/4" flute length, 4.4” total length. NF Carbide Burrs are designed for use on aluminum, non-ferrous metals, soft steel, reinforced plastics and other soft materials..
【SINGLE CUT EDGE DESIGN】:The single cutting edge design provides large, wide flutes evacuate the large chips easily and also prevent iron-chip accumulate and over-heat cause cutter head damage. Using a double cut burr on aluminum will just gum it up, heat it up, and end up pissing you off..
【EXTENDED LONG SHANK】: In the grinding process, the special extension long handle design is great for hard to reach areas of porting and reduced operator fatigue due to high performance applications..
【ADVANCES TUNSTEN MATERIAL】:100% raw virgin tungsten carbide burrs that the service life is very long, 10 times higher than the durability of other HSS cutter and 200 times more than the small wheel durability. Hardness can reach to HRC70, sharp and sturdy..
【TJATSE BRAND WARRANTY】: Packed with an great tool carry case for safety storage and protection. TJATSE provides an one-year no questions asked replacement warranty and friendly customer service....

Check Stock

TEMO SF-5L6 NF Aluminum Cut Carbide Rotary Burr File 1/2 Inch Head Round Tree 1/4 Inch Diameter 6 Inch Long Shank

These carbide burrs are designed to grind and shape aluminum and other non-ferrous metals. They are used in electric, pneumatic, and hydraulic die grinder. These burrs are essentially electric files which can grind in tight spaces with precision focus. Used by mechanics, machinists, tradesman, and hobbyists..
Aluminum cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading..
Made with tungsten carbide and suitable for deburring and polishing..
Extra long 6" shank. Aluminum cut head and meet US standard with 1/4" (6.35mm) shank,1/2" (12.7mm) head diameter, 1" (25.4mm) cut length, and 7" total length. | SF-5L6 Round Nose Tree Head Shape.
Individually packaged with a protective plastic tube..
US-BASED CUSTOMER SERVICE: Available by chat, email, phone, or visit us at our customer service center in La Crosse, WI..

Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Inverted Cone Shape Rotary Burrs Tool 6mm Dia for Die Grinder Drill Alloy Steel Hard Metal Carving Polishing Engraving 2pcs

Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.

Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Inverted Cone Rotary Burrs Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Drilling 3pcs

Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.

Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Top Flat Cylinder Rotary Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Polishing Model Engineering 3pcs

Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.

Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Single Cut Flame Rotary Burrs Tool 6mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Model Engineering 3pcs

Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.

Check Stock

YUELUTOL Aluminum Cutting Bits Carbide Burr Set-10 Pieces With 3mm(1/8 inch) Shank Dia and 6 mm (1/4 Inch) Head Size For Die Grinder Bits Aluminum And Wood

【Single Cut Carbide Burrs】:Aluminum cut burrs are for use on non-ferrous and non-metallic materials. It is designed for rapid stock removal with minimum chip loading. Good for your wood carving, metalwork ,drilling and engraving..
【Excellent Tungsten Carbide】:Made of heat-treated 100% raw material, long life and high durability. 10pcs Carbide Rotary Burr Set about 6mm Cut Dia, 3mm(1/8 inch) Shank, total length: approx. 45-50 mm fits dremel and most small rotary tools. Different shapes to meet your various needs..
【High Working Efficiency】:This single-cut carbide bur is designed for use in general purpose applications on steel, cast iron, ferrous, and nonferrous metals. Speed is generally 6000-50000 rev / min, high flute finish for easy chip flow and fast stock removal..
【Widely Application】:Easy to use, safe, reliable, economical and long service life. Widely used in machinery, automobile, ships, chemical, craft and more. Most popular for body shops, fabrication shops,brake shops, industrial shops, die manufacturers, home repairs ect..

Check Stock

uxcell Tungsten Carbide Rotary Files 1/8 Shank Double Cut Ball Shape Rotary Burrs Tool 6mm Dia for Die Grinder Drill Bit Wood Soft Metal Carving Polishing Model Engineering 3pcs

Specifications: Shank diameter: 3mm(1/8"), cutting edge diameter: 6mm(1/4"). Fits most rotary die grinders.
Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
Double Cut Design: The groove lines are crossed. Double groove rotary files are more suitable for the object density is relatively low, such as wood, plastic, aluminum. With good milling and cutting performance, ensures high work efficiency..
Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.

Check Stock

WHISTECK Carbide Burr Set 8Pcs Double Cut Tungsten Carbide Rotary Burr set 1/4 inch Shank Die Grinder Bits Carbide Rotary File for Metal Wood Carving Engraving Polishing,Drilling

【PREMIUM MATERIAL】: 8pcs carbide rotary burr set, made of heat-treated tungsten carbide steel, good toughness and resistance, sharp and sturdy. Unique tooth angle prevents chipping for the longest lasting design possible.
【DOUBLE-CUT DESIGN】: Double cut die grinder bits for fast material removal and smooth finish. Various shapes and sizes cutting burrs with end cut for interior contour work and face milling. 6mm (about 1/4 inch) shank carbide bit set fits most pneumatic tools and rotary die grinders.
【VERSATILE FEATURE】: High accuracy and high efficiency of our rotary file save your time and meet your different needs. Suitable for metalwork, tool making,wood carving, cutting, welding, chamferring, deburring, casting and sculpting. Easy to grasp and use, safe and reliable.
【WIDELY APPLICATION】: Most popular for body shops, fabrication shops,brake shops, industrial shops, die manufacturers, home repairs ect. Processing good on iron, cast steel, carbon steel, stainless steel, alloy steel, copper, marble, bone, wood and other non-metal..
【EXQUISITE PACKAGE】: Our tungsten carbide burrs are packed in a nice portable case, always keep neat and convenient. High texture box for shipping and protection, an essential kit for friends and relative....

Check Stock

uxcell Tungsten Carbide Rotary Files 1/4 Shank Single Cut Flame Shape Rotary Burrs Tool 10mm Dia for Die Grinder Drill Bit Alloy Steel Hard Metal Carving Polishing Model Engineering

Specifications: Shank diameter: 6mm(1/4"), cutting edge diameter: 10mm(2/5"). Fits most rotary die grinders.
Long Working Life: Made of heat-treated tungsten carbide that hardness can be up to above HRA85, sharp and sturdy, long service life.
Single Cut Design: Single groove rotary files are more suitable for the object density is relatively high, such as alloy steel, stainless steel, hardened steel.
Versatile Use: Widely used for metalwork, tool making, model engineering, wood carving, jewelry making,welding, chamfering, casting, deburring, grinding, sculpting.
Tips: Requirement of the carbide burrs rotating speed is: 4000-50000 rpm. Always ensure your burrs shank is well inserted into your collet and clamped down tightly.

Check Stock

CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool

[4 WINGS WOOD CNC ROUTER BIT 1/2 SHANK] Precise 4 Wings can cut your project material quickly and cleanly.1/2 Inch Shank CNC Spoilboard Surfacing Router Bit, 1/2" Cutting height, 1/2" Cutting depth,2"(50.8mm) Cutting Diameter..
[HIGH-QUALITY CNC ROUTER BIT] The sharp carbide tipped bit, made of microcrystalline carbide blades and strong hardened steel, have excellent wear resistance and sharp edges. High-precision grinding technology provides excellent abrasion resistance and sharp edges, and precise cutting will reduce chipping and burrs..
[WIDE RANGE OF APPLICATIONS] This professional bottom router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoil board, but also for trimming and slotting/grooving.Suitable for cutting solid wood, particleboard, plywood, MDF and different wood composites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand)..
[APPLICABLE EQUIPMENT] Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
[APPLICABLE EQUIPMENT] Use on CNC and other automatic routers as well a....

Check Stock

S&F STEAD & FAST Carbide Burr with ¼” Shank ½” Cutter Dia 1” Length, Professional Grade Tungsten File, Die Grinder Bit for Electric or Air Die Grinder, Cylinder End Cut, Grinding Burr bit for Metals

CNC machined cutting burrs rotary file bit made with heat-treated tungsten carbide with HRA hardness 003e 90, hard enough to handle metals including steels, copper, cast irons and nickel alloys. Performs better than HSS burrs, especially at high temperatures..
Grinder burr bits with shank diameter 1/4”, head diameter ½” / 12.7mm, head length 1” / 25mm, total length 2 ¾” / 70mm.
Tungsten carbide bit - Cylinder end cut shaped tungsten grinder head to be used with electric, air / pneumatic rotary tools at maximum rotation speed of 35000 rpm.
Popular metal burr double cut surface for better control of the carbide bit and for fast stock removal.
Carbide bur - Use for cutting / shaping / deburring metals, grinding welds and cylinder head porting.

Check Stock