Top 0 5ml Pcr Tube Reviews

PCR 96 Well Plate - 0.2ml 96 Well PCR Plate,No-Skirt（20 Plates）

【Product Specifications】：PCR 96 Well Plate, No-Skirt,0.2ml capacity, 20 trays/pack Moreover, the product ha been gamma irradiated..
【Product Features】: Thin and uniform tube wall ensures perfect heat transfer rate and uniform sample heating..
【Distinct mark】: vertical letters (A-H), horizontal letters (1-12), alphanumeric codes are conducive to sample organization, the convex design is adopted around the holes to prevent leakage..
【Application】: Suitable for all PCR instruments to bear 6,000RCF centrifugation in the fully supported rotor..
【Quick delivery】:The PCR 96 Well Plate are packed in boxes after being thoroughly checked and will be shipped by amazon, you will receive them very soon!.

Check Stock

Simport Amplitube T320-2N Polypropylene PCR Reaction Tube Strip with Attached Flat Cap, 8 x 0.2ml, Natural (Pack of 125)

【Specifications】：PCR 0.2ml Thin Wall With Flat Cap，Hinged Flat Caps Attached,DNase/RNase Free,125 Strips/Box..
【Ultra-thin pipe wall】：Super fast conduction of temperature. Commonly used in general and real-time PCR amplifiers in the market..
【Good transparency】: Mirror surface design of the PCR tube cap. Fully considered the optical factor, ensuring the accuracy and reliability of the experimental results..
【Well sealed】: Excellent sealing performance of the pipe cap. Easy to open and close. In the case of a suitable hot lid, the loss of reaction volume is at 5%.No distortion at high and low temperatures. -80℃~121℃..
【Quick delivery】:The PCR tubes are packed in boxes after being thoroughly checked and will be shipped by amazon, you will receive them very soon!.

Check Stock

PCR Tubes - PCR 0.2ml Thin Wall with Flat Cap, Strip of 8 Tubes,DNase/RNase Free,Pack of 125(Cap Included)

【Specifications】：PCR 0.2ml Thin Wall With Flat Cap，Strip of 8 Tubes,DNase/RNase Free,Pack of 125(Cap Included).
【Ultra-thin pipe wall】：Super fast conduction of temperature. Commonly used in general and real-time PCR amplifiers in the market..
【Good transparency】: Mirror surface design of the PCR tube cap. Fully considered the optical factor, ensuring the accuracy and reliability of the experimental results..
【Well sealed】: Excellent sealing performance of the pipe cap. Easy to open and close. In the case of a suitable hot lid, the loss of reaction volume is at 5%.No distortion at high and low temperatures. -80℃~121℃..
【Quick delivery】:The PCR tubes are packed in boxes after being thoroughly checked and will be shipped by amazon, you will receive them very soon!.

Check Stock

Honbay 20pcs 5ml Plastic Test Tubes Screw Cap Vial Orange Seal Cap Container

Clear plastic test tube with orange screw cap.
With 1-5ml calibration, easy reading of the liquid volume.
Resistance to low temperature, can be frozen for a long time.
Pack of 20 . Used in hospital, epidemic prevention station, schools, scientific reasearch laboratory, etc.

Check Stock

Bio Plas 0061 Assorted Polypropylene Microcentrifuge PCR Tube Rack, 80-Well, Pack of Five

Set of five 80-well microcentrifuge PCR tube racks accommodates 0.5mL, 1.2mL, and 2.0mL microcentrifuge tubes or PCR tubes.
16 x 5 configuration for freezing, storage, transport, and benchtop use.
Autoclavable at 250 degrees F and 15psi for 15 minutes.
Racks are 9" long, 2-1/16" deep, and have 10.5mm well diameter.

Check Stock

Mini Desk-top Centrifuge Set, Digital, High-Speed from 3000 RPM to 10000 RPM, 2 Rotors for 8 x 2.0/1.5 ml and 2 x 8-Strip PCR Tubes, 2 Sets of Adapters for 0.2ml and 0.5ml Tubes, 110V (Natural Color)

Closed-loop control technology, accurate speed control of 3000-10000 rpm.
Equipped with two rotors and various adapters, it’ s suitable for 0.2ml, 0.5ml, 1.5ml, 2.0ml micro centrifuge tubes and 0.1ml or 0.2ml PCR 8-strip tubes. Max. capacity up to 8×2ml micro centrifuge tube or 16×0.2ml PCR tube.
High-performance DC motor, powerful engine, quiet when running, noise003c 50dB.
Speed and time adjustable for various lab experiments.
Clear LED display to show time and speed.Wide-voltage range (110-240 V) to prevent interference to the running accuracy..
One year warranty with US-based professional customer support..

Check Stock

Mini Centrifuge Machine 4000rpm 7000rpm Lab Benchtop Centrifuge,2 Rotors for 0.2/0.5/1.5/2ml Micro tubex12 and 0.2ml 8/12 PCR stripex4

JOANLAB LC series is is perfect benchtop microcentrifuge for your lab to do quick spin downs.Speed can be switched between 4000RPM and 7000RPM , Max. RCF of 1080 x g/3286xg. Includes an 12-position 1.5/2 mL tube rotor as well as a 4-position 12-strip PCR tube rotor that can accommodate 48 individual PCR tubes or 0.2mL strip tubes. With the included adapters, 0.2 mL and 0.5 mL strip tubes can also be accommodated in the 12 position tube rotor, further increasing its versatility..
ENCLOSED DESIGH reduces the risk of liquid splashing into the equipment. Our this lab mini centrifuge also has a quick release design in which the rotors can be removed and installed without the use of any tools..
SAFETY PROTECTION-low voltage power input, sturdy lid, and rotor's safety buckle design. The rotor will stop when lid is opened while in rotation, protecting the operator from being injured by the high-speed spinning rotors..
With a quiet motor, and rubber base that absorbs vibrations,JOANLAB LC-4/7S mini centrifuge manchine keeps operational noise to a minimum , less than 47dB and reduces disruptions in the laboratory. And it takes simple operation to a new level. Once the device is powered on, simply place your sample in the centrifuge, close the lid, and it will beg....

Check Stock

5 Pcs Tube Rack Double Panel Microcentrifuge PCR Centrifuge Tube Holder, 60-Well

SIZE: 5 Pcs tube racks 60-well per side (12mm diameter and 8mm diameter).
COLOR: Green, blue, orange, purple and red. Show as the picture..
SIZE: Racks are 9" long, 2-1/16" deep, and have 10.5mm well diameter..
SUITABLE SIZE:These tube racks accommodates 0.5mL, 1.5mL, and 2mL centrifuge tubes or PCR tubes and 1.8ml cryotubes..

Check Stock

KINNOSE Tube Rack Double Panel 96-Well Polypropylene PCR Centrifuge Tube Holder for Microcentrifuge Tubes 0.2/0.5/1.5/1.8/2.0ml 3Pcs

【Package includes】 3pcs tube rack double panel 96-well Polypropylene PCR centrifuge tube holder for microcentrifuge tubes 0.2/0.5/1.5/1.8/2.0ml red blue and orange color.
【Size】11.6 inches long,4.6 inches wide,1.1 inch high.0.3 inch Dia. in small hole,0.45inch Dia. in big hole. Autoclaved temperature up to 121 celsius degree..
【Material】Made of polypropylene,anti-acid & alkali,and also prevent the dissolution of organic matter..
【Double-side panel】Accept for microcentrifuge tubes 0.2/0.5/1.5/1.8/2.0ml,fit your various needs!.
[100% Satisfaction Guarantee] As a reliable high quality product sold on Amazon, if you are not satisfied with our products within one year, KINNOSE will provide 100% refund service without any reason!.

Check Stock

5-Color Set, 2 oz. Each of G,Y,BK,R,BL - Plastic

Storage Buffer 20mM Tris-HCl, 1mM DTT, 0.1mM EDTA,100mM KCl 50% glycerol, 0.5%NP40, 0.5%TW20.
10×PCR Buffer 750 mM Tris-HCl (pH 8.8 at 25°C), 200 mM KCl, 50 mM (NH4)2SO4, 15mM MgCl2, 0.5% NP-40.
Unit definition One unit is the amount of enzyme required to catalyze the incorporation of 10 nmol of nucleotides into acid insoluble material in 30 min. at 74°C under assay conditions..
Applications PCR amplification of DNA fragments up to 5 kb DNA labeling and DNA sequencing PCR for cloning. Quality Control No contaminating endonuclease or exonuclease activity detected. Functionally tested in PCR.

Check Stock

OLYCRAFT 6Pcs PCR Low Profile 96 Well Plate No-Skirt PCR Plate Rectangle Plastic Disposable Cell Culture Plate Clear Bacterial Culture Plate for Laboratory - 79mm Length 118mm Width

【Package Include】--Coming with 6pcs 96 well PCR low profile plate with non-skirted, enough quantity for you to use..
【Size Reference】 --The bacterial culture plate is about 4.65''/118mm wide, 3.11''/79mm long, 0.81''/20.5mm thick, 0.22''/5.5mm inner diameter..
【Ultra-thin Pipe Wall】--Super fast conduction of temperature. Thin and uniform tube wall ensures perfect heat transfer rate and uniform sample heating..
【Distinct Mark】--Vertical letters (A-H), horizontal letters (1-12), alphanumeric codes are conducive to sample organization, the convex design is adopted around the holes to prevent leakage..
【Wide Application】--Suitable for all PCR instruments to bear 6,000RCF centrifugation in the fully supported rotor..

Check Stock

0.2ml Individual PCR Tubes, Natural, Flat Cap, Bag of 1000 Tubes/Unit

Optically clear flat caps for real-time PCR.
Sturdy, robust links between tubes maintain tube strip integrity.

Check Stock

96 Wells PCR Carrying Box PCR Tube Rack ONLY for 0.2ml Micro-Tubes, 8 x 12 Array (Yellow)

Material: PP. FIt for 0.2ml PCR Tubes, NOTE: ONLY FOR 0.2ML PCR TUBES/PLATE. Not suitable for any CAPSULES.
Each Weight: 90g, Package: 1x PCR Carrying Box.
Note: This item only for 0.2ml PCR tubes, Do not use for other purposes.
Notice: the top diameter is 5.8mm of holes, the bottom diameter is 4 mm of holes, the hole depth is 7.7mm for itself, the hole max depth is 14.8mm for the rack. If you encounter any problems, please feel free to contact us, we will definitely handle it properly for you.

Check Stock