Top 0 10v Signal Control Reviews

35A Electronic Speed Controller 3~6S Brushless ESC AM_32bit RC Controller Compatible for RC Crawler Truck & RC Car Model

  • The continuous current of 35A ESC is 35A, and the instantaneous peak can be up to 40A(≤10S). The working voltage is DC10V to 25.2V.
  • Electronic speed controller is supported DShot150/ 300/ 600/ 1200/ Oneshot/ Multishot and PWM, specializing used in RC car models, such as RC crawlers, trucks, cars. Please note, this ESC only can use for RC car models.
  • The input voltage is suitable for a 3~6s lipo battery. It is optimized for RC outrunner motors, suitable for EVO series motors and other outrunner motors, which can have well-used in RC car models.
  • The throttle signal cable is twisted pair, which is more effective, long life, and reduces interference, making the flight more stable.
  • The size of 35A ESC controller is 1.26 x 0.63 x 0.24in (32 x 16 x 6mm) and the weight is 8.1g(Including wires). The package included one electronic speed controller.
Check Stock

Agatige Frequency to Voltage Converter Module, 0-10Khz to 0-10V F/V Digital to Analog Converter Conversion Module

  • FUNCTION: The frequency of the pulse signal 0HZ to 10KHZ converts into an analog voltage signal of 0-10V. Can be used to interface switching between the PLC and the frequency converter, or interface matching such as the matching of motion control card and inverter control..
  • FEATURES: Input pulse level is 5V 12V 24V, which can be directly entered without serial resistor. The input signal frequency must maintain more than 0.5 seconds..
  • ANTI-INTERFERENCE: Conversion module's signal inputs with optical coupling isolation, which can ensure that the capability of anti-interfence..
  • APPLICATION: Frequency to Voltage Converter Module Can be used for industrial control panel PLC or other signal interface switching.
  • MAJOR SPECIFICATIONS: Output current: 5MA,Voltage: 0-10V, Input pulse level: 5V 12V 24V, Frequency: 0 to 10KHZ..
Check Stock

UpBright 9V AC/DC Adapter Compatible with Nintendo SNS-002 SNS002 Super NES Control Deck SNS-001 SNS001 SNES Mini DC10V 850mA 10V 10VDC 10.0V 0.85A 10 V Class 2 Power Supply Cord Charger Mains PSU

  • World Wide Input Voltage 100-240VAC 50/60Hz. OVP, OCP, SCP Protection (OVP: Over Voltage output Protection. OCP: Over Current output Protection. SCP: Short Circuit output Protection). Tested Units. In Great Working Condition. UpBright 30 days money back guarantee. 1 full year service warranty..
  • UpBright New Global 9V AC / DC Adapter Compatible with Nintendo SNS-002 SNS002 Super NES Control Deck SNS-001 SNS001 SNES Mini DC10V 850mA 10V 10VDC 10.0V 0.85A 10 V 10.0 VDC 9V - 12V Class 2 Power Supply Cord Cable PS Wall Home Battery Charger Mains PSU (Come with a Smart Plug Tip pigtail for greater compatibility.).
Check Stock

10-50V 100A 5000W DC Motor Engine Speed Controller 0-100% PWM Control Industrial Motor Speed Regulator for DC Brush Motor DC Lamps

  • PWM Duty Cycle:0%-100% and Quiescent current is 0.04A( not over 40mA when voltage is DC10V to DC30V).
  • Operating temperature:-20 to 40.It can perform normally when the temperature is below 0.
  • Universal speed controller can be used for DC brush motor, suitable for car cooling fan motor, car air conditioning motor, exhaust blower, treadmill motor, etc.
  • This motor speed controller can also be used for dimming DC lamps or controlling DC heater.
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 10

  • 20-V digital or ± 10-V peak-to-peak switching.
  • 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
  • Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 20

  • 20-V digital or ± 10-V peak-to-peak switching.
  • 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
  • Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check Stock

Juried Engineering CD4016BE CD4016 4016 100-pA 20-V 1 1 SPST 4-Channel Analog Switch Breadboard-Friendly IC DIP-14 Pack of 5

  • 20-V digital or ± 10-V peak-to-peak switching.
  • 280 ohm- typical on-state resistance for 15-V operation, Matched control-input to signal-output capacitance: Reduces output signal transients, Frequency response, switch on = 40MHz (typ.), Maximum control input current of 1 µA at 18 V over full package temperature range.
  • Switch on-state resistance matched to within 10 ohm typ. over 15-V signal-input range, High on/off output-voltage ratio: 65 dB typ. @ fis = 10 kHz, RL = 10 k ohm, Low crosstalk between switches: –50 dB typ. @ fis= 0.9 MHz, RL = 1 k ohm, 5-V, 10-V, and 15-V parametric ratings.
  • Example Applications: Analog signal switching/multiplexing: Signal gating, Squelch control, Chopper, Modulator, Demodulator, Commutating switch, Digital signal switching/multiplexing, CMOS logic implementation, Analog-to-digital & digital-to-analog....
Check Stock

PWM Signal Converter Module Digital to Analog Voltage Converter Adapter White

  • PWM voltage converter Convert 0-100% PWM digital signal into analog signal..
  • Signal interface switching between single chip or other industrial control board..
  • The power supply has the function of reverse connect protection, safe to use ..
  • Input digital signal can be 24V level 0-100%PWM signal. Output analog signal can be 0-10V voltage..
  • PWM signal receiving frequency range: 100hz-3khz, recommended 1khz-3khz..
Check Stock

Diamond Audio MICRO4V2 4-Channel 600 Watts RMS Class D Amplifier

  • ...hnology | Bridgeable for high power operation (CH1+CH2/CH3+CH4) | Balanced differential inputs for superior noise rejection.
  • Input sensitivity from 200mV to 10V accepts Line (RCA) and Speaker level input | Input selector switch (2 CH / 4 CH) | Selectable auto-turn-on mode: Signal Sensing (VOX), 12V Remote (REM) and DC offset (DC) | Fully variable, 12dB per octave, electronic crossovers | Built-in BTR Port (MICRO-USB) to connect our optional Bluetooth receiver-controller | Illuminated logo.
  • RMS Power Rating - RMS Power (2Ω): 150W x 4 | RMS Power (4Ω): 80W x 4 | Bridged (mono 1Ω): N/A | Bridged (mono 2Ω): N/A | Bridged (mono 4Ω): 300W x 2 | Topology: Full Range Class D Power Supply | Power Supply: Full PWM | Power Supply Threshold: 10.0VDC - 17.0VDC | Idle Current: (0.7A).
  • Distortion - THD 4 (1KHx @ 4Ω): 0.5% | S/N Ratio (A weighted @1W): -85dBA | S/N Ratio (A weighted @FP): -101.1dBA | Input Sensitivity - Low Input Level: 200mV - 10.0V | High Input Level: N/A | Input Impedance - Low Input Level: 20KΩ | High Input Level: 20KΩ.
  • Output Stage - Output Impedance: 0.018Ω | Dampin....
Check Stock

10V-12.8V AC/DC Adapter Replacement for Water Tech PBA099-US-EU PBA099 PBA099L TL02-128025U WTPBA099 PBA099-EU LC099-3S Battery Powered Pool Max HD ivac M3 M2 350 Vac Vacuum Cleaner Charger

  • New Global 10V - 12.8V 250mA 1.0A AC / DC Adapter Replacement for Water Tech PBA099-US-EU PBA099 PBA099L WTPBA099 PBA099-EU PBA099USEU PBA099AUL TL02-128025A PBA099AUS PBA099-AUL PBA099-AUS Water Tech 10V Pool Blaster Max CG, Millennium, Eclipse XL ACDC Charger PBA 099 Battery Powered Pool Vacs Max HD Watertech ivac M3 M2 Vac Vacuum Cleaner DC10V - DC12.8V DC12.6V 10.0V 12.6V 1000mA 12.6VDC 10VDC - 12.8VDC 0.25A - 1A Switching Power Supply Cord Cable Wall Home Battery Charger Mains PSU.
  • Compatible with: Water Tech Pool Blaster PBA099L PBA099 L CAT099 TL02-128025U TL02128025U Watertech 10V 1.0A 12V - 12.8A 250mA - 1A I.T.E.
  • Water Tech PBA099-US-EU PBA099 PBA099L WTPBA099 PBA099-EU PBA099USEU Pool Blaster Battery ACDC Charger WaterTech 10VDC 12.8VDC 250mA 1.0A Power Supply Charger.
  • WATER TECH ITEM No. PBA099-8-US-EU PBA099-8-US-EU-QUICK MFD 073015 11.2V 1.0A 11.2VDC 1A I.T.E Power Supply Fits Pool Blaster Max CG, Millennium, Eclipse XL, Volt FX-8.
  • Compatible with: Water Tech 10V Pool Blaster Max CG, Millennium, Eclipse XL Charger PBA099 PBA 099 PBAO99 Battery Powered Pool Vacs Max HD Watertech ivac M3 M2 350 ivacM3 ivacM2 ivac350 MaxCG MaxHD Vac Vacuum Cleaner And Sp....
Check Stock

NOYITO Voltage to Current Module 0-10V to 0-20mA

  • NOYITO Voltage to Current module, 0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V voltage signal conversion to 0-20mA or 4-20mA current signal output, by adjusting the voltage to adjust the size of the current. Can be used to generate the signal source, valve adjustment, inverter control, PLC debugging, instrumentation test, LED test, analog transmitter.003cbr003e.
  • Implement the industry standard voltage (0-2.5V ,0-3.3V,0-5V,0-10V,0-15V,0-24V) into an industry standard current (0-20mA, 4-20mA)., linear output, the output signal can be directly connected to the AD converter, with the AD function with the microcontroller connection.003cbr003e.
  • Using single-chip embedded technology. The module is small and easy to use in different places.003cbr003e.
  • Easy to use, can be fine-tuned by potentiometer.003cbr003e.
  • Module working voltage: DC12-24V . 【Please read the product pictures on the left side of the page for the wiring diagram of the product.】003cbr003e.
  • 【Manufacturer's One-year After-sale Warranty】.
Check Stock

AD8317 Logarithmic Detector, RF Log Detector Logarithmic Detector, Logarithmic Detector RF Signal Log Output Power Meter 1M-10000MHz Controller

  • [Main function]: This logarithmic detector is designed for ADI's AD8317 chip and is used for RF signal power detection..
  • [Detection frequency range]: The detection frequency range of the logarithmic detector is 1M-10GHz, and it can detect RF signals with a power of -55dBm to -0dBm, and convert the RF signal into a DC voltage output..
  • [Excellent performance]: The greater the RF signal amplitude or power, the higher the output voltage, and the output voltage is proportional to the logarithm of the input signal amplitude, which will expand the dynamic range of the detected signal by 55dB..
  • [Wide use]: The logarithmic detector is widely used in radio frequency signal detection, signal power measurement, environmental field strength detection, and can also be used as a component of automatic gain control and automatic level control..
  • [Stable and durable]: This logarithmic detector can withstand high and low temperatures, is stable and durable, with a temperature measurement range of 0°C to 1024°C, and a converter temperature resolution of 0.25°C..
Check Stock

Extech 412355A Current and Voltage Calibrator/Meter

  • Precision source for calibrating process devices and measuring DC process signals.
  • Oyster case with flip-up display is ideal for handheld or benchtop applications.
  • Large 3-1/2 digit LCD display and touch keypad.
  • Display readings in mA or as a percent of the 0 to 24mA range or as mV in voltage ranges.
  • Provides adjustable 0 to 24mA and 0 to 10V calibration source.
Check Stock